Test Report

FCC ID: 2ACG9-SNAP

Test Report

Download: PDF
FCCID_4131695

FCC PART 22H, PART 24E MEASUREMENT AND TEST REPORT For CONEDERA S.A. ALBORADA 10 ETAPA AVE. BENJAMIN CARRION C.C.LA ROTONDA LOCAT 2, Guayaquil, Ecuador FCC ID: 2ACG9-SNAP Report Type: Product Type: Original Report Mobile Phone Report Number: RSZ181022007-00B Report Date: 2018-12-29 Rocky Kang Reviewed By: RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 MEASUREMENT UNCERTAINTY ....................................................................................................................................4 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 DESCRIPTION OF TEST CONFIGURATION ......................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 TEST EQUIPMENT LIST ...........................................................................................................................................7 FCC §1.1307(B) & §2.1093 - RF EXPOSURE INFORMATION ..............................................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 TEST RESULT ...............................................................................................................................................................9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................10 FCC § 2.1046, § 22.913 (A) & § 24.232 (C) - RF OUTPUT POWER ......................................................................11 APPLICABLE STANDARD ............................................................................................................................................11 TEST PROCEDURE ......................................................................................................................................................11 TEST DATA ................................................................................................................................................................11 FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH .............................................................14 APPLICABLE STANDARD ............................................................................................................................................14 TEST PROCEDURE ......................................................................................................................................................14 TEST DATA ................................................................................................................................................................14 FCC §2.1051, §22.917(A) & §24.238(A); - SPURIOUS EMISSIONS AT ANTENNA TERMINALS .................17 APPLICABLE STANDARD ............................................................................................................................................17 TEST PROCEDURE ......................................................................................................................................................17 TEST DATA ................................................................................................................................................................17 FCC § 2.1053; § 22.917 (A);§ 24.238 (A) - SPURIOUS RADIATED EMISSIONS ...............................................21 APPLICABLE STANDARD ............................................................................................................................................21 TEST PROCEDURE ......................................................................................................................................................21 TEST DATA ................................................................................................................................................................21 FCC § 22.917 (A); § 24.238 (A) - BAND EDGES ......................................................................................................23 APPLICABLE STANDARD ............................................................................................................................................23 TEST PROCEDURE ......................................................................................................................................................23 TEST DATA ................................................................................................................................................................23 FCC § 2.1055; § 22.355; § 24.235 - FREQUENCY STABILITY ............................................................................26 APPLICABLE STANDARD ............................................................................................................................................26 TEST PROCEDURE ......................................................................................................................................................26 TEST DATA ................................................................................................................................................................27 FCC Part 22H/24E Page 2 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B GENERAL INFORMATION Product Description for Equipment under Test (EUT) The CONEDERA S.A.’s product, model number: SNAP (FCC ID: 2ACG9-SNAP) or the "EUT" in this report was a Mobile Phone, which was measured approximately: 115.6mm (L) * 51mm (W) * 12.8mm (H), rated with input voltage: DC 3.7V from battery or DC 5.0V from adapter. Adapter Information: Input: AC 100-240V, 50/60Hz Output: DC 5.0V, 500mA±50mA *All measurement and test data in this report was gathered from production sample serial number: 1801645 (Assigned by BACL, Shenzhen). The EUT supplied by the applicant was received on 2018-10-02. Objective This test report is prepared on behalf of CONEDERA S.A. in accordance with Part 2-Subpart J, Part 22-Subpart H and Part 24-Subpart E of the Federal Communication Commissions rules. The objective is to determine the compliance of EUT with FCC rules for output power, modulation characteristic, occupied bandwidth, and spurious emission at antenna terminal, spurious radiated emission, frequency stability, and band edge. Related Submittal(s)/Grant(s) FCC Part 15B JBP and Part 15.247 DSS submissions with FCC ID: 2ACG9-SNAP. Test Methodology All tests and measurements indicated in this document were performed in accordance with the Code of Federal Regulations Title 47 Part 2, Sub-Part J as well as the following parts: Part 22 Subpart H - Public Mobile Services Part 24 Subpart E - Personal Communication Services Applicable Standards: TIA/EIA 603-D and KDB 971168 D01 v03. All emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. FCC Part 22H/24E Page 3 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Measurement Uncertainty Parameter Uncertainty Occupied Channel Bandwidth ±5% RF output power, conducted ±1.5dB Unwanted Emission, conducted ±1.5dB Emissions, Below 1GHz ±4.70dB radiated Above 1GHz ±4.80dB Temperature ±1℃ Supply voltages ±0.4% Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China. The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No.: 342867, the FCC Designation No.: CN1221. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062B. FCC Part 22H/24E Page 4 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B SYSTEM TEST CONFIGURATION Description of Test Configuration The EUT was configured for testing according to TIA/EIA-603-D. The final qualification test was performed with the EUT operating at normal mode. Equipment Modifications No modification was made to the EUT. Support Equipment List and Details Manufacturer Description Model Serial Number Rohde & Schwarz Universal Radio Communication Tester CMU200 110605 Block Diagram of Test Setup CMU200 AC Power Source Antenna 1.0 Meter EUT Non-Conductive Table 150 cm above Ground Plane 1.5 Meters FCC Part 22H/24E Page 5 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §1.1307, §2.1093 RF Exposure (SAR) Compliance* §2.1046; § 22.913 (a); RF Output Power Compliance § 24.232 (c); § 2.1047 Modulation Characteristics Not Applicable § 2.1049; § 22.905; Occupied Bandwidth Compliance § 22.917; § 24.238; Spurious Emissions at Antenna § 2.1051; § 22.917 (a);§ 24.238 (a); Compliance Terminal § 2.1053; § 22.917 (a);§ 24.238 (a); Field Strength of Spurious Radiation Compliance § 22.917 (a);§ 24.238 (a); Band Edge Compliance § 2.1055; § 22.355;§ 24.235; Frequency stability Compliance Compliance*: Please refer to SAR report released by BACL, report number: RSZ181022007-20. FCC Part 22H/24E Page 6 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B TEST EQUIPMENT LIST Calibration Calibration Manufacturer Description Model Serial Number Date Due Date Radiated Emission Test Sunol Sciences Horn Antenna DRH-118 A052604 2017-12-22 2020-12-21 Rohde & Signal Analyzer FSEM 845987/005 2018-06-23 2019-06-23 Schwarz Sunol Sciences Broadband Antenna JB1 A040904-1 2017-12-22 2020-12-21 COM-POWER Pre-amplifier PA-122 181919 2018-11-12 2019-11-12 Sonoma Amplifier 310N 186238 2018-11-12 2019-11-12 instrument Anritsu Signal Generator 68369B 004114 2017-12-24 2018-12-24 Rohde & EMI Test Receiver ESCI 101120 2018-01-11 2019-01-11 Schwarz COM POWER Dipole Antenna AD-100 041000 NCR NCR A.H. System Horn Antenna SAS-200/571 135 2018-09-01 2021-08-31 Ducommun UFA147A-2362- RF Cable MFR64639 231029-003 2018-07-11 2021-07-10 technologies 100100 Ducommun RF Cable 104PEA 218124002 2018-11-12 2019-11-12 technologies Ducommun RF Cable RG-214 1 2018-05-21 2018-11-21 technologies Ducommun RF Cable RG-214 2 2018-11-12 2019-11-12 technologies Ducommun Horn Antenna ARH-4223-02 1007726-04 2017-12-29 2020-12-28 Technologies Ducommun Horn Antenna ARH-4223-02 1007726-03 2017-12-29 2020-12-28 technologies Ducommun Pre-amplifier ALN-22093530-01 991373-01 2018-08-03 2019-08-03 technologies FCC Part 22H/24E Page 7 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Calibration Calibration Manufacturer Description Model Serial Number Date Due Date RF Conducted Test Rohde & SPECTRUM FSU26 200120 2017-12-24 2018-12-24 Schwarz ANALYZER Temperature & ESPEC EL-10KA 09107726 2017-12-21 2018-12-21 Humidity Chamber Long Wei DC Power Supply TPR-6420D 398363 NCR NCR ESG Vector Signal Aglient E4438C MY42080875 2018-05-09 2019-05-09 Generator Wideband Radio Rohde & Communication CMU200 106891 2017-12-14 2018-12-14 Schwarz Tester Ducommun RF Cable RG-214 3 Each Time technologies WEINSCHEL 10dB Attenuator 5324 AU 3842 Each Time Unknown Power Splitter 227 6958 2018-05-21 2019-05-21 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements that traceable to National Primary Standards and International System of Units (SI). FCC Part 22H/24E Page 8 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC §1.1307(b) & §2.1093 - RF EXPOSURE INFORMATION Applicable Standard FCC§1.1310 and §2.1093. Test Result Compliance, please refer to the SAR report: RSZ181022007-20. FCC Part 22H/24E Page 9 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC §2.1047 - MODULATION CHARACTERISTIC According to FCC § 2.1047(d), Part 22H, 24E ,there is no specific requirement for digital modulation, therefore modulation characteristic is not presented. FCC Part 22H/24E Page 10 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC § 2.1046, § 22.913 (a) & § 24.232 (c) - RF OUTPUT POWER Applicable Standard According to FCC §2.1046 and §22.913 (a), the ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 watts. According to FCC §2.1046 and §24.232 (C), mobile and portable stations are limited to 2 watts EIRP and the equipment must employ a means for limiting power to the minimum necessary for successful communications. The peak-to-average power ratio (PAPR) of the transmitter output power must not exceed 13 dB. Test Procedure Conducted method: The RF output of the transmitter was connected to the CMU200 through sufficient attenuation. CMU200 EUT Attenuator Radiated method: TIA 603-D section 2.2.17 Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 56 % ATM Pressure: 101.0 kPa The testing was performed by Shawn Xiao on 2018-11-21. FCC Part 22H/24E Page 11 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Conducted Power Cellular Band (Part 22H) Average Output Frequency Limit Mode Channel Power (MHz) (dBm) (dBm) 128 824.2 33.78 38.45 GSM 190 836.6 33.64 38.45 251 848.8 33.76 38.45 Frequency Average Output Power (dBm) Limit Mode Channel (MHz) 1 slot 2 slots 3 slots 4 slots (dBm) 128 824.2 33.87 31.80 30.04 27.70 38.45 GPRS 190 836.6 33.70 32.00 30.24 27.93 38.45 251 848.8 33.76 32.15 30.41 28.07 38.45 PCS Band (Part 24E) Average Output Frequency Limit Mode Channel Power (MHz) (dBm) (dBm) 512 1850.2 28.23 33 GSM 661 1880.0 28.49 33 810 1909.8 28.90 33 Frequency Average Output Power (dBm) Limit Mode Channel (MHz) 1 slot 2 slots 3 slots 4 slots (dBm) 512 1850.2 28.63 26.13 25.36 23.45 33 GPRS 661 1880.0 28.83 26.29 25.31 23.37 33 810 1909.8 29.09 26.42 25.27 23.25 33 FCC Part 22H/24E Page 12 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Peak-to-average ratio (PAR) Cellular Band PAR Limit Mode Channel (dB) (dB) Low 1.42 13 GSM Middle 1.37 13 High 1.41 13 PCS Band PAR Limit Mode Channel (dB) (dB) Low 1.38 13 GSM Middle 1.35 13 High 1.29 13 Radiated Power GSM Mode: Rx Antenna Substituted FCC Part 22H/24E Receiver Turntable Absolute Frequency Cable Antenna Reading Angle Height Polar Level Level Limit Margin (MHz) loss Gain (dBμV) Degree (m) (H/V) (dBm) (dBm) (dBm) (dB) (dB) (dB) ERP for Cellular Band (Part 22H), Middle Channel 836.6 92.14 141 1.2 H 20.1 0.7 0.0 29.40 38.45 9.05 836.6 93.21 75 1.8 V 32.8 0.7 0.0 32.10 38.45 6.35 EIRP for PCS Band (Part 24E), Middle Channel 1880.00 85.44 38 2.2 H 15.4 1.30 9.40 23.50 33 9.50 1880.00 90.34 212 1.2 V 20.1 1.30 9.40 28.20 33 4.80 Note: All above data were tested with no amplifier. Absolute Level = Substituted Level - Cable loss + Antenna Gain Margin = Limit- Absolute Level FCC Part 22H/24E Page 13 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH Applicable Standard FCC 47 §2.1049, §22.917, §22.905, §24.238 and §27.53. . Test Procedure The RF output of the transmitter was connected to the simulator and the spectrum analyzer through sufficient attenuation. The resolution bandwidth of the spectrum analyzer was set at 5 kHz (GSM) and the 26 dB & 99% bandwidth was recorded. EUT Splitter Signal Analyzer Universal Radio Communication Tester Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 56 % ATM Pressure: 101.0 kPa The testing was performed by Shawn Xiao on 2018-11-21. EUT operation mode: Transmitting FCC Part 22H/24E Page 14 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Test Result: Compliance. Please refer to the following tables and plots. Cellular Band (Part 22H) 99% Occupied 26 dB Emission Frequency Mode Bandwidth Bandwidth (MHz) (kHz) (kHz) GSM(GMSK) 836.6 243.6 317.3 PCS Band (Part 24E) 99% Occupied 26 dB Emission Frequency Mode Bandwidth Bandwidth (MHz) (kHz) (kHz) GSM(GMSK) 1880.0 245.2 310.9 Cellular Band (Part 22H) 26 dB Emissions & 99% Occupied Bandwidth for GSM (GMSK) Mode * RBW 5 kHz Delta 1 [T1 ] * VBW 10 kHz 0.18 dB Ref 39.5 dBm * Att 20 dB SWT 40 ms 317.307692303 kHz Offset 14.5 dB OBW243.589743590 kHz Marker 1 [T1 ] 30 2.54 dBm A D1 29 dBm 836.441346154 MHz 1 PK Temp 1 [T1 OBW] MAXH 20 14.19 dBm T1 LVL T2 836.479807692 MHz Temp 2 [T1 OBW] 10 13.13 dBm 1 1 836.723397436 MHz D2 3 dBm 0 -10 3DB -20 -30 -40 -50 -60 Center 836.6 MHz 100 kHz/ Span 1 MHz Date: 21.NOV.2018 00:20:34 FCC Part 22H/24E Page 15 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B PCS Band (Part 24E) 26 dB Emissions & 99% Occupied Bandwidth for GSM (GMSK) Mode * RBW 5 kHz Delta 1 [T1 ] * VBW 10 kHz -1.06 dB Ref 39.5 dBm * Att 20 dB SWT 40 ms 310.897435908 kHz Offset 14.5 dB OBW245.192307692 kHz Marker 1 [T1 ] 30 -0.30 dBm A D1 25.6 dBm 1.879846154 GHz 1 PK Temp 1 [T1 OBW] MAXH 20 9.18 dBm LVL 1.879878205 GHz T1 T2 Temp 2 [T1 OBW] 10 9.54 dBm 1.880123397 GHz 1 1 0 D2 -0.4 dBm -10 3DB -20 -30 -40 -50 -60 Center 1.88 GHz 100 kHz/ Span 1 MHz Date: 21.NOV.2018 00:05:28 FCC Part 22H/24E Page 16 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC §2.1051, §22.917(a) & §24.238(a); - SPURIOUS EMISSIONS AT ANTENNA TERMINALS Applicable Standard FCC §2.1051, §22.917(a) and §24.238(a)). The spectrum was to be investigated to the tenth harmonics of the highest fundamental frequency as specified in § 2.1051. Test Procedure The RF output of the transceiver was connected to a spectrum analyzer and simulator through appropriate attenuation. The resolution bandwidth of the spectrum analyzer was set at 100kHz for below 1GHz and 1MHz for above 1GHz. Sufficient scans were taken to show any out of band emissions up to 10th harmonic. EUT Splitter Signal Analyzer CMU200 Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 56 % ATM Pressure: 101.0 kPa The testing was performed by Shawn Xiao on 2018-11-21. EUT operation mode: Transmitting Test result: Compliance, please refer to the following plots. FCC Part 22H/24E Page 17 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Cellular Band (Part 22H) 30 MHz – 1 GHz (GSM Mode) * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz -36.20 dBm Ref 39.5 dBm * Att 20 dB SWT 100 ms 934.711538462 MHz Offset 14.5 dB 30 A 1 PK MAXH 20 LVL 10 0 Fundamental test -10 D1 -13 dBm 3DB -20 -30 1 -40 -50 -60 Start 30 MHz 97 MHz/ Stop 1 GHz Date: 21.NOV.2018 00:22:19 1 GHz – 10 GHz (GSM Mode) * RBW 1 MHz Marker 1 [T1 ] * VBW 3 MHz -18.69 dBm Ref 29.5 dBm * Att 10 dB SWT 55 ms 1.663461538 GHz Offset 14.5 dB 20 A 1 PK MAXH 10 LVL 0 -10 D1 -13 dBm 1 -20 3DB -30 -40 -50 -60 -70 Start 1 GHz 900 MHz/ Stop 10 GHz Date: 21.NOV.2018 00:23:03 FCC Part 22H/24E Page 18 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B PCS Band (Part 24E) 30 MHz – 1 GHz (GSM Mode) * RBW 100 kHz Marker 1 [T1 ] * VBW 300 kHz -45.71 dBm Ref 29.5 dBm * Att 10 dB SWT 100 ms 407.740384615 MHz Offset 14.5 dB 20 A 1 PK MAXH 10 LVL 0 -10 D1 -13 dBm -20 3DB -30 -40 1 -50 -60 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Date: 21.NOV.2018 00:08:03 1 GHz – 2 GHz (GSM Mode) * RBW 1 MHz Marker 1 [T1 ] * VBW 3 MHz -35.77 dBm Ref 39.5 dBm * Att 20 dB SWT 2.5 ms 1.732371795 GHz Offset 14.5 dB 30 A 1 PK MAXH 20 LVL 10 0 -10 D1 -13 dBm Fundamental test 3DB -20 -30 1 -40 -50 -60 Start 1 GHz 100 MHz/ Stop 2 GHz Date: 21.NOV.2018 00:09:31 FCC Part 22H/24E Page 19 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B 2 GHz – 20 GHz (GSM Mode) * RBW 1 MHz Marker 1 [T1 ] * VBW 3 MHz -45.84 dBm Ref 29.5 dBm * Att 10 dB SWT 105 ms 2.173076923 GHz Offset 14.5 dB 20 A 1 PK MAXH 10 LVL 0 -10 D1 -13 dBm -20 3DB -30 -40 1 -50 -60 -70 Start 2 GHz 1.8 GHz/ Stop 20 GHz Date: 21.NOV.2018 00:10:02 FCC Part 22H/24E Page 20 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC § 2.1053; § 22.917 (a);§ 24.238 (a) - SPURIOUS RADIATED EMISSIONS Applicable Standard FCC § 2.1053, §22.917(a) and § 24.238(a) . Test Procedure The transmitter was placed on a wooden turntable, and it was transmitting into a non-radiating load which was also placed on the turntable. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the receiving antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. The test was performed by placing the EUT on 3-orthogonal axis. The frequency range up to tenth harmonic of the fundamental frequency was investigated. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. Spurious emissions in dB = 10 lg (TX pwr in Watts/0.001) – the absolute level Spurious attenuation limit in dB = 43 + 10 Log10 (power out in Watts) Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 56 % ATM Pressure: 101.0 kPa The testing was performed by Shawn Xiao on 2018-11-21. EUT operation mode: Transmitting FCC Part 22H/24E Page 21 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Pre-scan with Low, Middle and High channel, the worst case as below: 30 MHz ~ 10 GHz: Cellular Band (Part 22H) Rx Antenna Substituted Receiver Turntable Absolute Frequency Cable Antenna Limit Margin Reading Angle Height Polar Level Level (MHz) Loss Gain (dBm) (dB) (dBμV) Degree (m) (H/V) (dBm) (dBm) (dB) (dBi) Cellular Band, Middle channel 237.12 38.04 42 1.1 H -62.9 0.32 0 -63.26 -13 50.26 237.12 39.36 161 2.2 V -60.5 0.32 0 -60.79 -13 47.79 1673.20 59.28 350 1.1 H -47.8 1.30 8.90 -40.20 -13 27.20 1673.20 64.41 20 1.6 V -42.1 1.30 8.90 -34.50 -13 21.50 2509.80 50.68 221 1.1 H -52.8 2.60 10.20 -45.20 -13 32.20 2509.80 52.85 250 2.1 V -50.1 2.60 10.20 -42.50 -13 29.50 4183.00 58.16 177 1.6 H -43.2 1.50 11.80 -32.90 -13 19.90 4183.00 59.02 347 1.5 V -41.6 1.50 11.80 -31.30 -13 18.30 30 MHz ~ 20 GHz: PCS Band (Part 24E) Rx Antenna Substituted Receiver Turntable Absolute Frequency Cable Antenna Limit Margin Reading Angle Height Polar Level Level (MHz) Loss Gain (dBm) (dB) (dBμV) Degree (m) (H/V) (dBm) (dBm) (dB) (dBi) PCS Band, Middle channel 237.12 39.83 49 2.3 H -61.2 0.32 0 -61.47 -13 48.47 237.12 40.29 129 1.2 V -59.5 0.32 0 -59.86 -13 46.86 3760.00 55.19 351 1.8 H -46.0 1.50 11.80 -35.70 -13 22.70 3760.00 54.62 142 1.7 V -46.1 1.50 11.80 -35.80 -13 22.80 5640.00 47.62 0 1.9 H -50.0 1.70 12.40 -39.30 -13 26.30 5640.00 45.24 298 1.2 V -52.0 1.70 12.40 -41.30 -13 28.30 Note: 1) Absolute Level = Substituted Level - Cable loss + Antenna Gain 2) Margin = Limit- Absolute Level FCC Part 22H/24E Page 22 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC § 22.917 (a); § 24.238 (a) - BAND EDGES Applicable Standard According to § 22.917(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to §24.238(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. Test Procedure The RF output of the transmitter was connected to the input of the spectrum analyzer through sufficient attenuation. The center of the spectrum analyzer was set to block edge frequency EUT Splitter Signal Analyzer CMU200 Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 56 % ATM Pressure: 101.0 kPa The testing was performed by Shawn Xiao on 2018-11-21. EUT operation mode: Transmitting Test Result: Compliance. Please refer to the following plots. FCC Part 22H/24E Page 23 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Cellular Band, Left Band Edge for GSM (GMSK) Mode * RBW 5 kHz Marker 1 [T1 ] * VBW 10 kHz -13.76 dBm Ref 29.5 dBm * Att 10 dB * SWT 300 ms 823.987179487 MHz Offset 14.5 dB 20 A 1 RM * MAXH 10 LVL 0 -10 1 D1 -13 dBm -20 3DB -30 -40 -50 -60 -70 Center 824 MHz 200 kHz/ Span 2 MHz Date: 21.NOV.2018 00:16:43 Cellular Band, Right Band Edge for GSM (GMSK) Mode * RBW 5 kHz Marker 1 [T1 ] * VBW 10 kHz -13.04 dBm Ref 29.5 dBm * Att 10 dB * SWT 300 ms 849.019230769 MHz Offset 14.5 dB 20 A 1 RM * MAXH 10 LVL 0 -10 1 D1 -13 dBm -20 3DB -30 -40 -50 -60 -70 Center 849 MHz 200 kHz/ Span 2 MHz Date: 21.NOV.2018 00:17:32 FCC Part 22H/24E Page 24 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B PCS Band, Left Band Edge for GSM (GMSK) Mode * RBW 5 kHz Marker 1 [T1 ] * VBW 10 kHz -18.50 dBm Ref 29.5 dBm * Att 10 dB * SWT 300 ms 1.849983974 GHz Offset 14.5 dB 20 A 1 RM * MAXH 10 LVL 0 -10 D1 -13 dBm 1 -20 3DB -30 -40 -50 -60 -70 Center 1.85 GHz 200 kHz/ Span 2 MHz Date: 21.NOV.2018 00:12:33 PCS Band, Right Band Edge for GSM (GMSK) Mode * RBW 5 kHz Marker 1 [T1 ] * VBW 10 kHz -18.10 dBm Ref 29.5 dBm * Att 10 dB * SWT 300 ms 1.910006410 GHz Offset 14.5 dB 20 A 1 RM * MAXH 10 LVL 0 -10 D1 -13 dBm 1 -20 3DB -30 -40 -50 -60 -70 Center 1.91 GHz 200 kHz/ Span 2 MHz Date: 21.NOV.2018 00:13:26 FCC Part 22H/24E Page 25 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B FCC § 2.1055; § 22.355; § 24.235 - FREQUENCY STABILITY Applicable Standard FCC § 2.1055, §22.355, §24.235. According to FCC §2.1055, the frequency stability shall be sufficient to ensure that the fundamental emissions stay within the authorized bands of operation. According to §22.355, the carrier frequency of each transmitter in the Public Mobile Services must be maintained within the tolerances given in Table below: Frequency Tolerance for Transmitters in the Public Mobile Services Frequency Range Base, fixed Mobile ≤ 3 watts Mobile＞3 watts (MHz) (ppm) (ppm) (ppm) 25 to 50 20.0 20.0 50.0 50 to 450 5.0 5.0 50.0 450 to 512 2.5 5.0 5.0 821 to 896 1.5 2.5 2.5 928 to 929. 5.0 N/A N/A 929 to 960. 1.5 N/A N/A 2110 to 2220 10.0 N/A N/A According to §24.235, the frequency stability shall be sufficient to ensure that the fundamental emissions stays within the authorized frequency block. Test Procedure Frequency Stability vs. Temperature: The equipment under test was connected to an external DC power supply and the RF output was connected to communication test set via feed-through attenuators. The EUT was placed inside the temperature chamber. The DC leads and RF output cable exited the chamber through an opening made for the purpose. After the temperature stabilized for approximately 20 minutes, the frequency output was recorded from the communication test set. Frequency Stability vs. Voltage: For hand carried, battery powered equipment; reduce primary supply voltage to the battery operating end point which shall be specified by the manufacturer. Temperature Chamber EUT Test Equipment FCC Part 22H/24E Page 26 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 56 % ATM Pressure: 101.0 kPa The testing was performed by Shawn Xiao on 2018-11-21. EUT operation mode: Transmitting Test Result: Compliance. Please refer to the following tables. Cellular Band (Part 22H) GSM Mode Middle Channel, fo =836.6MHz Temperature Frequency Frequency Power Supplied Limit Error Error (℃) (VDC) (ppm) (Hz) (ppm) -30 1 0.0012 2.5 -20 -2 -0.0024 2.5 -10 5 0.0060 2.5 0 7 0.0084 2.5 10 3.7 9 0.0108 2.5 20 11 0.0131 2.5 30 13 0.0155 2.5 40 15 0.0179 2.5 50 19 0.0227 2.5 20 V min.= 3.5 21 0.0251 2.5 20 V max.= 4.2 26 0.0311 2.5 FCC Part 22H/24E Page 27 of 28

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181022007-00B PCS Band (Part 24E) GSM Mode Middle Channel, fo =1880.0 MHz Temperature Frequency Frequency Power Supplied Error Error Result (℃) (VDC) (Hz) (ppm) -30 15 0.0080 pass -20 17 0.0090 pass -10 20 0.0106 pass 0 22 0.0117 pass 10 3.7 23 0.0122 pass 20 26 0.0138 pass 30 24 0.0128 pass 40 25 0.0133 pass 50 27 0.0144 pass 20 V min.= 3.5 31 0.0165 pass 20 V max.= 4.2 29 0.0154 pass ***** END OF REPORT ***** FCC Part 22H/24E Page 28 of 28


Document Created: 2019-01-11 18:44:49
Document Modified: 2019-01-11 18:44:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC