Modular Approval_FCC

FCC ID: 2ACDZ-3301SBSL

Cover Letter(s)

Download: PDF
FCCID_3253070

Modular Approval Request Letter FCC ID: 2ACDZ—3301SBSL Data:Dec.20, 2016 Gentlemen: There‘s a 3301—SBSL that would like to have your authorization as a modular approval. The specific product as below, with its designed features and specified description, meets special requirements for full modular approval on FCC Public Notice DA 00—1407 Released: June 26, 2000 by cross—reference list below. Company Hangzhou Gubei Electronics Technology Co., Ltd Model Number _|\WT1SBSL FCC ID 2ACDZ—3301SBSL Requirement of Public Notice DAOO—1407 Part 15.212 1. The modular transmitter must haveits own RF shielding. The module has its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs. The module has only digital 1/Os for data input or output. All these inputs are buffered in MCU (U4). Please see the schematic.pdf. 3. The modular transmitter must have its own power supply regulation. All power lines derived from the host device are regulated before energizing other circuits internal to the module. Please see the schematic.pdf. 4. The modular transmitter must comply with the antenna requirements of Section The module meets the FCC antenna requirements. 15.203 and 15.204(c). 5. The modular transmitter must be tested in a stand—alone configuration, i.e., the The module was tested in a stand—alone module must not be inside another device during testing. configuration. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the The label position of the module is clearly indicated It FCC ID is not visible when the module is installed inside another device, then the is on the RF shielding. outside of the device into which the module is installed must also display a label referring to the enclosed module. 7. The modular transmitter must comply with any specific rule or operating The module is compliant with all applicable FCC rules. requirements applicable to the transmitter and the manufacturer must provide Detail instructions are given in the Users Manual. Please adequate instructions along with the module to explain any such requirements. A see user‘s manual.pdf. copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any applicable RF exposure The module comply with applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific requirements. Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNIl and millimeter wave devices perform routine environmental g RE Exposure to demonstrate compliance. In addition, ating under Section 15.247 are required to Acordance with Section 15.247(b)(4).


Document Created: 2019-10-27 06:10:10
Document Modified: 2019-10-27 06:10:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC