I19Z60710-SEM01_SAR_Rev2_part5

FCC ID: 2ACCJH103

RF Exposure Info

Download: PDF
FCCID_4317690

© Impedance Measurement Plot for Body TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 1.900000 GHz 44.864 0 547.21 pH 6.5327 O y 1.900000 GHz 87.393 mU 124.24 ° ChiAvg= 20 Chi: Start 1.70000 GHz —— Stop 2.10000 GHz 2 __—2].170 dB 00 00 00 o0 00 1 & Ch1: Start 1.70000 GHz —— Stop 2.10000 GHz C" 1—Port Certificate No: D1900V2—5d101_Jul18 Page 8 of 8

kn n ene e en n nge en e nn e e e e s . R w1 g Callbfatlon Laboratory of i‘\\\\;//’/,; S Schweizerischer Kalibrierdienst Schmid & Partner iB\EE/MEé c Service suisse d‘étalonnage Engineering AG ;//—a 7 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *4/17?\\‘\\\»‘ S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client CTTL (Auden) Certificate No: D2300V2—1018_Jul18 CALIBRATION CERTIFICATE Object D2300V2 — SN:1018 Calibration procedure(s) QA CAL—O05.v10 Calibration procedure for dipole validation kits above 700 MHz Calibration date: July 24, 2018 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02678) Apr—19 Power sensor NRP—Z91 SN: 103244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—Z91 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—18 (No. 217—02682) Apr—19 Type—N mismatch combination SN: 5047.2 / 06827 04—Apr—18 (No. 217—02683) Apr—19 Reference Probe EX3DV4 SN: 7349 30—Dec—17 (No. EX3—7349_Dec17) Dec—18 DAE4 SN: 601 26—Oct—17 (No. DAE4—601_Oct17) Oct—18 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: US37292783 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—16) In house check: Oct—18 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—16) In house check: Oct—18 Network Analyzer Agilent E8358A SN: US41080477 31—Mar—14 (in house check Oct—17) In house check: Oct—18 Name Function ignatur Calibrated by: Claudio Leubler Laboratory Technician Approved by: Katia Pokovic Technical Manager m Issued: July 24, 2018 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2300V2—1018_Jul18 Page 1 of 8 wneprg n ragi es

Calibration Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner C Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2300V2—1018_Jul18 Page 2 of 8 Nes veperg n ragnean n en n en en n e n n n y > 0

() S w Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.10.1 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2300 MHz &1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.5 1.67 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 38.3 26 % 1.69 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 12.4 Wikg SAR for nominal Head TSL parameters normalized to 1W 49.0 Wikg & 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 250 mW input power 5.95 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.6 Wikg £ 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.9 1.81 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 52.3 £6 % 1.85 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 11.9 Wikg SAR for nominal Body TSL parameters normalized to 1W 47.0 Wikg + 17.0 % (k=2) SAR averaged over 10 cm° (10 g) of Body TSL condition SAR measured 250 mW input power 5.73 W/kg SAR for nominal Body TSL parameters normalized to 1W 22.7 Wikg * 16.5 % (k=2) Certificate No: D2300V2—1018_Jul18 Page 3 of 8 Nn epeg n rggi esn n mn n enc ee c n e >

(lEM» w Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 50.8 Q — 2.9 jQ Return Loss — 30.4 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 46.8 Q — 2.4 jQ Return Loss —27.7 dB General Antenna Parameters and Design | Electrical Delay (one direction) 1.169 ns —l After long term use with 100W radiated power, only a slight warming of the dipole nearthe feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on March 30, 2009 Certificate No: D2300V2—1018_Juli8 Page 4 of 8 Ns veperg n ragn en n en n en en n e n n n y >

DASY5 Validation Report for Head TSL Date: 24.07.2018 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2300 MHz; Type: D2300V2; Serial: D2300V2 — SN:1018 Communication System: UID 0 — CW; Frequency: 2300 MHz Medium parameters used: f = 2300 MHz; 0 = 1.69 $/m; &, = 38.3; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: Probe: EX3DV4 — SN7349; ConvF(8.08, 8.08, 8.08) @ 2300 MHz; Calibrated: 30.12.2017 Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 26.10.2017 Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 115.7 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 23.9 W/kg SAR(I g) = 12.4 W/kg; SAR(10 g) = 5.95 W/kg Maximum value of SAR (measured) = 19.9 W/kg dB —4.20 —8.40 ~12.60 —16.80 —21.00 0 dB = 19.9 W/kg = 12.99 dBW/kg Certificate No: D2300V2—1018_Jul18 Page 5 of 8 Nesn vperg n agi en n en n en ies n n e n n n n y >

Impedance Measurement Plot for Head TSL Eile Yiew Channel Sweep Calibration Trace Scale Marker System Window Help 2300000 GHz 50.827 O 23.551 pF —2.9303 O 2.300000 GHz 30.261 mU —72.609 ° Ch1Aug= 20 Ch1: Start 2.10000 GHz —— Stop 2.50000 GHz —3(1.382 dB 00| 00 00 00 00 Ch 1 = Ch1: Start 2.10000 GHz —— Stop 2.50000 GHz Status CH 1: LCL Certificate No: D2300V2—1018_Jul18 Page 6 of 8 Nn ey n n en n n n ng n > n >

DASY5 Validation Report for Body TSL Date: 16.07.2018 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2300 MHz; Type: D2300V2; Serial: D2300V2 — SN:1018 Communication System: UID 0 — CW; Frequency: 2300 MHz Medium parameters used: £ = 2300 MHz; 0 = 1.85 S/m; & = 52.3; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: * Probe: EX3DV4 — SN7349; ConvF(8.08, 8.08, 8.08) @ 2300 MHz; Calibrated: 30.12.2017 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 26.10.2017 * Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 & DASY532 52.10.1(1476); SEMCAD X 14.6.11(7439) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 106.5 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 22.4 W/kg SAR(I g) = 11.9 W/kg; SAR(10 g) = 5.73 W/kg Maximum value of SAR (measured) = 18.8 W/kg dB 0 —4.00 —8.00 —12.00 —16.00 —20.00 0 dB = 18.8 W/kg = 12.74 dBW/kg Certificate No: D2300V2—1018_Jul18 Page 7 of 8 Ne n voperg n rag en e mb n ng eene n nene se n mm meg n n >

G Impedance Measurement Plot for Body TSL Eile View Channel Sweep Calibration Trace Scale Marker . 2300000 GHz 46.842 O 28.515 pF —2.4267 Q 2300000 GHz 41.117 mU —141.03 ° Ch 1 Aug= 20 Ch1: Start 2.10000 GHz —— Stop 2.50000 GHz 00 5.00 —2f.720 dB 0.00 .00 00 00 00 00 5 Ch 1 Aug= Ch1: Start 2.10000 GHe —— Stop 2.50000 GHz Status CH 1: LCL Certificate No: D2300V2—1018_Jul18 Page 8 of 8 Nneprg n esn n en >

Calibration Laboratory of s (z E= g_ Schweizerischer Kalibrierdienst 4 e Schmid & Partner % + fel Service suisse d‘étalonnage Engineering AG T sag & Servizio svizzero dtaratura Zeughausstrasse 43, 8004 Zurich, Switzerland 4”'47“\\\“‘} Hntals m annse) S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client CTTL (Auden) Certificate No: D2450V2—853_Jul18 |CALIBRATION CERTIFICATE Object D2450V2 — SN:853 Calibration procedure(s) QA CAL—05.v10 Calibration procedure for dipole validation kits above 700 MHz Callbration date: July 24, 2018 This calibration certficate documents the traceabilty to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probabilty are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory faciity: environment temperature (22 : 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards iD # Cal Date (Cortficate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Ap—18 (No. 217—0267202673) Aprt9 Power sensor NRP—291 SN: 103244 04—Ap—18 (No. 217—02672) Apr—19 Power sensor NRP—291 SN: 103245 04—Ap—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—18 (No. 217—02682) Apr—19 Type—N mismatch combination SN: 5047.2 / 06827 O4—Apr—18 (No. 217—02683) Apr—19 Reference Probe EX3DV4 SN: 7349 30—Dec—17 (No. EX3—7349_Dect7) Dec—18 DAE4 SN: 601 26—Oct—17 (No. DAE4—601_Oct17) Oct—18 Secondary Standards 1D # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (in house check Oct—16) in house check: Oct—18 Power sensor HP 8481A SN: US37202783 07—Oct—15 (in house check Oct—16) in house check: Oct—18 Power sensor HP 8481A SN: MY41002317 07—Oct—15 (in house check Oct—16) in house check: Oct—18 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—16) in house check: Oct—18 Network Analyzer Agilent EB35BA SN: US41080477 31—Mar—14 (in house check Oct—17) in house check: Oct—18 ) Name Function $ fl( Calibrated by: Claudio Leubler Laboratory Technician yea Approved by: Katia Pokovie Technical Manager Issued: July 24, 2018 This callbration certficate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2450V2—853_Jul18 Page 1 of 8 wreropeg rage e t w rrge en esmeva raene mg uns

Calibration Laboratory of sls Schweizerischer Kalibrierdienst w o Schmid & Partner ;t‘\fi-//lmé Service suisse d‘étalonnage Engineering AG 4 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland "‘:/T;\T\e\‘ Swiss Calibration Service Falatals Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—853_Jul18 Page 2 of 8 wreropeg rageve t w rigener rxrurwr e se y en i e

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.10.1 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz &1 MHz Head TSL parameters Thefollowing parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £0.2) °C 37.8 26 % 1.85 mho/m +6 % Head TSL temperature change during test <0.5 °C ——— SAR result with Head TSL SAR averaged over1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 18.2 Wikg SAR for nominal Head TSL parameters normalized to 1W 51.7 Wikg #17.0 % (k=2) SAR averaged over 10 cm? (10 g) of Head TSL condition SAR measured 250 mW input power 6.13 Wkg SAR for nominal Head TSL parameters normalized to 1W 24.2 Wikg 2 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £0.2) °C 51.9 26 % 2.02 mho/m x6 % Body TSL temperature change during test <0.5 °C hnd ~~ SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 13.1 Whg SAR for nominal Body TSL parameters normalized to 1W 51.3 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.10 Wikg SAR for nominal Body TSL parameters normalized to 1W 24.1 Wikg =16.5 % (k=2) Certificate No: D2450V2—853_Jul18 Page 3 of 8 Cerepegrggere e m mege es ny —

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 54.1 Q + 8.9 jQ Return Loss —25.2 0B Antenna Parameters with Body TSL Impedance, transformed to feed point 48.5 0 + 6.0 j Return Loss —24.1 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.161 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of thedipole. The antennais therefore short—circuited for DC—signals. On someof the dipoles, small end caps are added to the dipole armsin order to improve matching when loaded according to the position as explained in the Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections nearthe feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on November 10, 2009 Cortificate No: D2450V2—853_Jul18 Page 4 of 8 Ceepegrigere e en reggmee ce en n ny o+

DASY5 Validation Report for Head TSL Date: 24.07.2018 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:853 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.85 S/m; &, = 37.8; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: *« Probe: EX3DV4 — SN7349; ConvF(7.88, 7.88, 7.88) @ 2450 MHz; Calibrated: 30.12.2017 *« Sensor—Surface: 1.4mm (Mechanical Surface Detection) + Electronics: DAE4 Sn601; Calibrated: 26.10.2017 * Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 + DASY32 52.10.1(1476); SEMCAD X 14.6.11(7439) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 115.3 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 26.1 W/kg SAR(I g) = 13.2 W/kg; SAR(10 g) = 6.13 W/kg Maximum value of SAR (measured) = 21.6 W/kg 320 ar.s0 22.00 0 dB = 21.6 W/kg = 13.34 dBW/kg Certificate No: D2450V2—853_Jul18 Page 5 of 8 e

Impedance Measurement Plot for Head TSL 54.148 O 254.98 pH 39251 0 2450000 GHz 54.794 mU 41.259 ° Ch1Aug= 20 Ch1: Star225000 GHz —— Stop 265000 Gitz —2$ 225 dB oo .0 00 35 .00 00 Cht: Star 2 Stop 265000 G omm2 mm erreames> meed Certificate No: D2450V2—853_Jul18 Page 6 of 8 Cerepep en e m reggemee ue ce n on my >

DASY5 Validation Report for Body TSL Date: 16.07.2018 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:853 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f= 2450 MHz; 0 = 2.02 $/m; &, = 51.9; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASYS52 Configuration: *« Probe: EX3DV4 — SN7349; ConvF(8.01, 8.01, 8.01) @ 2450 MHz: Calibrated: 30.12.2017 *« Sensor—Surface: 1.4mm (Mechanical Surface Detection) *« Electronics: DAE4 Sn601; Calibrated: 26.10.2017 * Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 «_ DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 108.0 V/m; Power Drift = —0.03 dB Peak SAR (extrapolated) = 25.6 W/kg SAR(I g) = 13.1 W/kg; SAR(10 g) =6.1 W/kg Maximum value of SAR (measured) = 21.0 W/kg dB 0 ~4.00 —8.00 12.00 ~16.00 —20.00 0 dB =21.0 W/kg = 13.22 dBW/kg Certificate No: D2450V2—853_Jul18 Page 7 of 8 Covrepegragrren e en rggeree n n n my en nc

Impedance Measurement Plot for Body TSL 2450000 GHz 48. 464 O 389.27 pH 5.9924 0 2450000 GHz 62.710 mU 100.89 ° Ch 1Aug= 20 Chi1: Star 2.25000 GH Stop 265000 GHz 00 2450000 GHz —24.053 dB 5.00 o.00 00 oo 00 00 oo oo oo ChiAvg« Chi: Stan 2 Status _CH 1: Certificate No: D2450V2—853_Jult8 Page 8 of 8 Crvrepeg nc n e m egrme cee >

No.I19Z60710-SEM01 Page 220 of 220 ANNEX I Accreditation Certificate ©Copyright. All rights reserved by CTTL.


Document Created: 2019-06-13 18:16:58
Document Modified: 2019-06-13 18:16:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC