Test Report_PCE

FCC ID: 2ACCJH085

Test Report

Download: PDF
FCCID_3850488

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Report No.: SZEM180100088201 Email: ee.shenzhen@sgs.com Page: 1 of 34 1 Cover page FCC REPORT Application No: SZEM1801000882RG Applicant: TCL Communication Ltd. Manufacturer: TCL Communication Ltd. Factory: TCL Mobile Communicate Co., LTD. Huizhou Product Name: LTE/UMTS/GSM mobile phone Model No.(EUT): T700A Trade Mark: handy FCC ID: 2ACCJH085 Standards: 47 CFR Part 2 47 CFR Part 22 47 CFR Part 24 47 CFR Part 27 Test Method: FCC KDB 971168 D01 Power Meas License Digital Systems v03 TIA-603-E 2016 Date of Receipt: 2018-03-01 Date of Test: 2018-03-01 to 2018-04-25 Date of Issue: 2018-05-08 Test Result: PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Authorized Signature: Derek Yang Wireless Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 2 of 34 Version Revision Record Version Chapter Date Modifier Remark 01 2018-05-08 Original Authorized for issue by: Tested By 2018-05-08 (Mike Hu) /Project Engineer Date Checked By 2018-05-08 (Jim Huang) /Reviewer Date This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 3 of 34 2 Test Summary 2.1 (824-849 MHz paired with 869-894 MHz) Test Item FCC Rule No. Requirements Test Result Verdict Effective (Isotropic) §2.1046, Section 1 of Radiated Power FCC: ERP ≤ 7 W.. Pass §22.913 Appendix B Output Data Peak-Average Section 2 of --- Limit≤13 dB Pass Ratio Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049 Pass EBW: No limit. Appendix B ≤ -13 dBm/1%*EBW, in 1 MHz bands Band Edges §2.1051, Section 5 of immediately outside and adjacent to Pass Compliance §22.917 Appendix B the frequency block. Spurious Emission FCC: ≤ -13 dBm/100 kHz, from 9 kHz §2.1051, Section 6 of at Antenna to 10th harmonics but outside Pass §22.917 Appendix B Terminals authorized operating frequency ranges. Field Strength of §2.1053, Section 7 of FCC: ≤ -13 dBm/100 kHz. Pass Spurious Radiation §22.917 Appendix B §2.1055, Section 8 of Frequency Stability ≤ ±2.5ppm. Pass §22.355 Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. 2.2 (1710-1755 MHz paired with 2110-2155 MHz) Test Item FCC Rule No. Requirements Test Result Verdict Effective (Isotropic) §2.1046, Section 1 of Radiated Power EIRP ≤ 1 W Pass §27.50(d) Appendix B Output Data Peak-Average §2.1046, Section 2 of Limit≤13 dB Pass Ratio §27.50(d) Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049 Pass EBW: No limit. Appendix B ≤ -13 dBm/1%*EBW, in 1 MHz bands Band Edges §2.1051, Section 5 of immediately outside and adjacent to Pass Compliance §27.53(h) Appendix B the frequency block. Spurious Emission ≤ -13 dBm/1 MHz, from 9 kHz to 10th §2.1051, Section 6 of at Antenna harmonics but outside authorized Pass §27.53(h) Appendix B Terminals operating frequency ranges. Field Strength of §2.1053, Section 7 of ≤ -13 dBm/1 MHz. Pass Spurious Radiation §27.53(h) Appendix B §2.1055, Frequency Stability ≤ ±2.5 ppm. Section 8 of Pass §27.54 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 4 of 34 Test Item FCC Rule No. Test Result Requirements Verdict Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. 2.3 (1850-1910 MHz paired with 1930-1990 MHz) Test Item FCC Rule No. Requirements Test Result Verdict Effective (Isotropic) §2.1046, Section 1 of Radiated Power EIRP ≤ 2 W Pass §24.232 Appendix B Output Data Peak-Average §2.1046, Section 2 of ≤13 dB Pass Ratio §24.232 Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049 Pass EBW: No limit. Appendix B ≤ -13 dBm/1%*EBW, in 1 MHz bands Band Edges §2.1051, Section 5 of immediately outside and adjacent to Pass Compliance §24.238 Appendix B the frequency block. Spurious Emission ≤ -13 dBm/1 MHz, from 9 kHz to 10th §2.1051, Section 6 of at Antenna harmonics but outside authorized Pass §24.238 Appendix B Terminals operating frequency ranges. Field Strength of §2.1053, Section 7 of ≤ -13 dBm/1 MHz. Pass Spurious Radiation §24.238 Appendix B §2.1055, Section 8 of Frequency Stability ≤ ±2.5 ppm. Pass §24.235 Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. 2.4 Band 7(2500-2570 MHz paired with2620-2690 MHz) Test Item FCC Rule No. Requirements Test Result Verdict Effective (Isotropic) §2.1046, Section 1 of Radiated Power EIRP ≤ 2W Pass §27.50(h) Appendix B Output Data Peak-Average Section 2 of §27.50(a) Limit≤13 dB Pass Ratio Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049 Pass EBW: No limit. Appendix B For mobile digital stations, the attenuation factor shall be not less than 40 + 10 log (P) dB on all frequencies between the channel edge and 5 megahertz from the channel edge, 43 Band Edges §2.1051, Section 5 of + 10 log (P) dB on all frequencies Pass Compliance §27.53(m4) Appendix B between 5 megahertz and X megahertz from the channel edge, and 55 + 10 log (P) dB on all frequencies more than X megahertz from the channel edge, where X is the greater This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 5 of 34 Test Item FCC Rule No. Requirements Test Result Verdict of 6 megahertz or the actual emission bandwidth as defined in paragraph (m)(6) of this section. Spurious Emission §2.1051, Section 6 of at Antenna Pass §27.53(m) Appendix B Terminals Field Strength of §2.1053, Section 7 of Pass Spurious Radiation §27.53(m) Appendix B §2.1055, Within authorized bands of Section 8 of Frequency Stability Pass §27.54 operation/frequency block. Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. 2.5 Band12 (699-716MHz paired with 729-746 MHz) Test Item FCC Rule No Requirements Test Result Verdict Effective (Isotropic) Section 1 of Radiated Power §27.50(c) FCC: ERP ≤ 3 W. Pass Appendix B Output Data Peak-Average §2.1046, Section 2 of Limit≤13 dB Pass Ratio §27.50(c) Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049 Pass EBW: No limit. Appendix B ≤ -13 dBm/1%*EBW, in 1 MHz bands Band Edges §2.1051, Section 5 of immediately outside and adjacent to Pass Compliance §27.53(g) Appendix B the frequency block. Spurious Emission FCC: ≤ -13 dBm/100 kHz, from 9 kHz §2.1051, Section 6 of at Antenna to 10th harmonics but outside Pass §27.53(g) Appendix B Terminals authorized operating frequency ranges. Field Strength of §2.1053, Section 7 of FCC: ≤ -13 dBm/100 kHz. Pass Spurious Radiation §27.53(g) Appendix B §2.1055, Section 8 of Frequency Stability ≤ ±2.5ppm. Pass §27.54 Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 6 of 34 2.6 Band13 (777-787MHz paired with 746-756 MHz) Test Item FCC Rule No. Requirements Test Result Verdict Effective (Isotropic) §2.1046, Section 1 of Radiated Power FCC: ERP ≤ 3 W. Pass §27.50(b) Appendix B Output Data Peak-Average Section 2 of §27.50 Limit≤13 dB N/T Ratio Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049, Pass EBW: No limit. Appendix B ≤ -13 dBm/1%*EBW, in 1 MHz bands Band Edges §2.1051, Section 5 of immediately outside and adjacent to the Pass Compliance §27.53(c) Appendix B frequency block. FCC: ≤ -13 dBm/100 kHz, from 9 kHz to 10th harmonics but outside authorized operating frequency ranges. On all frequencies between 763–775 MHz and 793–805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable Spurious Emission §2.1051, stations. Section 6 of at Antenna §27.53(c) Pass For operations in the 746-758 MHz, Appendix B Terminals §27.53(f) 775-788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to −70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and −80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. Field Strength of §2.1053, Section 7 of FCC: ≤ -13 dBm/100 kHz. Pass Spurious Radiation §27.53(c) Appendix B §2.1055, Within authorized bands of Section 8 of Frequency Stability Pass §27.54 operation/frequency block. Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 7 of 34 2.7 Band41 (2555-2655 MHz paired with 2555-2655 MHz) FCC Rule Test Item Requirements Test Result Verdict No. Effective (Isotropic) §2.1046, Section 1 of Radiated Power EIRP ≤ 2W Pass §27.50(h) Appendix B Output Data Section 2 of Peak-Average Ratio §27.50(a) ≤13 dB Pass Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049 Pass EBW: No limit. Appendix B For mobile digital stations, the attenuation factor shall be not less than 40 + 10 log (P) dB on all frequencies between the channel edge and 5 megahertz from the channel edge, 43 + 10 log (P) dB on all frequencies between Band Edges §2.1051, Section 5 of 5 megahertz and X megahertz from the Pass Compliance §27.53(m) Appendix B channel edge, and 55 + 10 log (P) dB on all frequencies more than X megahertz from the channel edge, where X is the greater of 6 megahertz or the actual emission bandwidth as defined in paragraph (m)(6) of this section. Spurious Emission at §2.1051, Section 6 of Pass Antenna Terminals §27.53(m) Appendix B Field Strength of §2.1053, Section 7 of Pass Spurious Radiation §27.53(m) Appendix B §2.1055, Within authorized bands of Section 8 of Frequency Stability Pass §27.54 operation/frequency block. Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 8 of 34 2.8 Band 66(1710-1780 MHz paired with 2110-2200 MHz) FCC Rule Test Item Requirements Test Result Verdict No. Effective (Isotropic) §2.1046, Section 1 of Radiated Power EIRP ≤ 1 W Pass §27.50(d) Appendix B Output Data §2.1046, Section 2 of Peak-Average Ratio ≤13 dB Pass §27.50(d) Appendix B Modulation Section 3 of §2.1047 Digital modulation Pass Characteristics Appendix B OBW: No limit. Section 4 of Bandwidth §2.1049 Pass EBW: No limit. Appendix B ≤ -13 dBm/1%*EBW, in 1 MHz bands Band Edges §2.1051, Section 5 of immediately outside and adjacent to Pass Compliance §27.53(h) Appendix B the frequency block. ≤ -13 dBm/1 MHz, from 9 kHz to 10th Spurious Emission at §2.1051, Section 6 of harmonics but outside authorized Pass Antenna Terminals §27.53(h) Appendix B operating frequency ranges. Field Strength of §2.1053, Section 7 of ≤ -13 dBm/1 MHz. Pass Spurious Radiation §27.53(h) Appendix B §2.1055, Section 8 of Frequency Stability ≤ ±2.5 ppm. Pass §27.54 Appendix B NOTE:For the verdict, the “N/A” denotes “not applicable”, the “N/T” denotes “not tested”. Note: 1.LTE Band 12(699 to 716 MHz) overlaps the entire frequency range of LTE Band 17(704 to 716 MHz), therefore, test data provided in this report Band 12 and portion of Band 17. 2.LTE Band 66(1710 to 1780 MHz) overlaps the entire frequency range of LTE Band 4(1710 to 1755 MHz), therefore, test data provided in this report Band 66 and portion of Band 4. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180 1 0008201 Page Content Page vension 2 Teot summary 21 (sat000 MHzpwrco wasn.mo e 22 (rri0c175s NHz pxreo wre 21102155 Mita 2s 18501910 NHz pxreo wre 1900—1000 itz 2a Bao 1(2500—2570 Mitz pxneo wrses20—2e00 Mita 2s Bwore (600—7160z purcowim r29—m5 Miz] 2s Bwore (777—78Mpnreowim rs—755 Mie] 27 Bwon (2515—2055 NHz paneo wim as4s2059 Mitn 2s Baoe(1710—1780 Mz pareo w2110—2200 MHq a eenena. inronmation in an Cusnt hrommmon n a2 Geema. Desoretonor EUT n as Test Mooe n aa Test Enmicomment i2 as Test Frecusnor is as Tesr Looxton 1s a7 Test Faoury 1s as Devamon mon Staroaros 1s as Astommumes rron Stavoaro Conpmors 1s a10 OrerIirommmion Recuesten ay me Custonen 2o an Tecunion Sreoirioaton 2o a besomietionortests a aa Coroucten Outeu Rowen a a2 Erreomve(sorroni)Reowreo Rowen or Trwsurren a as Cccuneogmomor as aa Bao Eoce ar Arreina Teutius as as Srumous Ano HerwoExissious ar Avteriw Teriwc. as as PeveAvemee zo a a7 Fiew Smexariior Spuous Rwownon a

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180 10008201 Page 10 of 48. Freouenoy Steaumy/Tevremiruse Vamamon as 43 TesrSeries 2s 491| TestSotgp 1 2s 492. TestSotipe 27 498| TestSetip$ 2s 494 TestSotrpa 2o 410 Test Conomons so s walwtest nstmuments s s mexsumement unoentainry x 7. PMoToohaphs— EuT constructionaL peralls x throneiventetsomnenietovaneatennee eurnioeeonie ocomcavnctucntnoresaacnnataeagies mmtorooninpimacenonsecencetramerimes

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 11 of 34 3 General Information 3.1 Client Information Applicant: TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Address of Applicant: Pudong Area Shanghai, P.R. China. 201203 Manufacturer: TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Address of Manufacturer: Pudong Area Shanghai, P.R. China. 201203 Factory: TCL Mobile Communicate Co., LTD. Huizhou No.86,Hechang 7th West Road, ZhongKai Hi-tech Development District, Address of Factory: Huizhou, Guangdong 3.2 General Description of EUT Product Name: LTE/UMTS/GSM mobile phone Model No.: T700A Trade Mark: handy Sample Type: Portable production Antenna Type: PIFA GSM850: -3.3dBi; GSM1900:-2.2dBi WCDMA B2:-1.9dBi;WCDMA B4:-2.1dBi; WCDMA B5:-3.6dBi Antenna Gain: LTE B2:-1.9dBi; LTE B4:-2.6dBi;LTE B5:-3.9dBi; LTE B7: -1.7dBi; LTE B12:-4.9dBi; LTE B13:-4.9dBi; LTE B17:-4.5dBi;LTE B41:-1.6dBi; LTE B66:-2.5dBi; 3.3 Test Mode Test Mode Test Modes Description GSM/TM1 GSM system, GSM/GPRS/EGPRS, GMSK modulation GSM/TM2 GSM system, EGPRS, 8PSK modulation UMTS/TM1 UMTS system, WCDMA, QPSK modulation UMTS/TM2 UMTS system, WCDMA, 16QAM modulation LTE/TM1 LTE system, QPSK modulation LTE/TM2 LTE system, 16QAM modulation NOTE: The test mode(s) are selected according to relevant radio technology specifications. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 12 of 34 3.4 Test Environment Environment Parameter Selected Values During Tests Relative Humidity 52% Atmospheric Pressure: 1015MPa Temperature TN 25 °C VL 3.5V Voltage : VN 3.8V VH 4.2V NOTE: VL= lower extreme test voltage VN= nominal voltage VH= upper extreme test voltage TN= normal temperature This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 13 of 34 3.5 Test Frequency RF Channel Test Mode TX / RX Low (L) Middle (M) High (H) Channel 128 Channel 190 Channel 251 TX 824.2MHz 836.6 MHz 848.8 MHz GSM850 Channel 128 Channel 190 Channel 251 RX 869.2 MHz 881.6 MHz 893.8 MHz RF Channel Test Mode TX / RX Low (L) Middle (M) High (H) Channel 512 Channel 661 Channel 810 TX 1850.2MHz 1880.0 MHz 1909.8 MHz GSM1900 Channel 512 Channel 661 Channel 810 RX 1930.2 MHz 1960.0 MHz 1989.8 MHz RF Channel Test Mode TX / RX Low (L) Middle (M) High (H) Channel 4132 Channel 4182 Channel 4233 TX 826.4MHz 836.4 MHz 846.6 MHz WCDMA850 Channel 4357 Channel 4407 Channel 4458 RX 871.4 MHz 881.4 MHz 891.6 MHz RF Channel Test Mode TX / RX Low (L) Middle (M) High (H) Channel 1312 Channel 1413 Channel 1513 TX 1712.4MHz 1732.6 MHz 1752.6 MHz WCDMA1700 Channel 1537 Channel 1638 Channel 1738 RX 2112.4 MHz 2132.6 MHz 2152.6 MHz RF Channel Test Mode TX / RX Low (L) Middle (M) High (H) Channel 9262 Channel 9400 Channel 9538 TX 1852.4 MHz 1880.0 MHz 1907.6 MHz WCDMA1900 Channel 9662 Channel 9800 Channel 9938 RX 1932.4 MHz 1960.0 MHz 1987.6 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 14 of 34 RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 18607 Channel 18900 Channel 19193 TX 1850.7 MHz 1880 MHz 1909.3 MHz 1.4MHz Channel 607 Channel 900 Channel 1193 RX 1930.7 MHz 1960 MHz 1989.3 MHz Channel 18615 Channel 18900 Channel 19185 TX 1851.5 MHz 1880 MHz 1908.5 MHz 3MHz Channel 615 Channel 900 Channel 1185 RX 1931.5 MHz 1960 MHz 1988.5 MHz Channel 18625 Channel 18900 Channel 19175 TX 1852.5 MHz 1880 MHz 1907.5 MHz 5MHz Channel 625 Channel 900 Channel1175 RX 1932.5 MHz 1960 MHz 1987.5 MHz LTE BAND 2 Channel 18650 Channel 18900 Channel 19150 TX 1855 MHz 1880 MHz 1905 MHz 10MHz Channel 650 Channel 900 Channel 1150 RX 1935 MHz 1960 MHz 1985 MHz Channel 18675 Channel 18900 Channel 19125 TX 1857.5 MHz 1880 MHz 1902.5 MHz 15MHz Channel 675 Channel 900 Channel 1125 RX 1937.5 MHz 1960 MHz 1982.5 MHz Channel 18700 Channel 18900 Channel 19100 TX 1860 MHz 1880 MHz 1900 MHz 20MHz Channel 700 Channel 900 Channel 1100 RX 1940 MHz 1960 MHz 1980 MHz RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 19957 Channel 20175 Channel 20393 TX 1710.7 MHz 1732.5 MHz 1754.3 MHz 1.4MHz Channel 1975 Channel 2175 Channel 2375 RX 2112.5 MHz 2132.5MHz 2152.5 MHz Channel 19965 Channel 20175 Channel 20385 LTE BAND 4 TX 1711.5 MHz 1732.5 MHz 1753.5 MHz 3MHz Channel 2000 Channel 2175 Channel 2350 RX 2115 MHz 2132.5MHz 2150 MHz Channel 19975 Channel 20175 Channel 20375 5MHz TX 1712.5 MHz 1732.5 MHz 1752.5 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 15 of 34 Channel 1975 Channel 2175 Channel 2375 RX 2112.5 MHz 2132.5MHz 2152.5 MHz Channel 20000 Channel 20175 Channel 20350 TX 1715 MHz 1732.5 MHz 1750 MHz 10MHz Channel 2000 Channel 2175 Channel 2350 RX 2115 MHz 2132.5MHz 2150 MHz Channel 20025 Channel 20175 Channel 20325 TX 1717.5 MHz 1732.5 MHz 1747.5 MHz 15MHz Channel 2025 Channel 2175 Channel 2325 RX 2117.5 MHz 2132.5MHz 2147.5 MHz Channel 20050 Channel 20175 Channel 20300 TX 1720 MHz 1732.5 MHz 1745 MHz 20MHz Channel 2050 Channel 2175 Channel 2300 RX 2120 MHz 2132.5MHz 2145 MHz RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 20407 Channel 20525 Channel 20643 TX 824.7 MHz 836.5 MHz 848.3 MHz 1.4MHz Channel 2407 Channel 2525 Channel 2643 RX 869.7 MHz 881.5 MHz 893.3 MHz Channel 20415 Channel 20525 Channel 20635 TX 825.5 MHz 836.5 MHz 847.5 MHz 3MHz Channel 2415 Channel 2525 Channel 2635 RX 870.5 MHz 881.5 MHz 892.5 MHz LTE BAND 5 Channel 20425 Channel 20525 Channel 20625 TX 826.5 MHz 836.5 MHz 846.5 MHz 5MHz Channel 2425 Channel 2525 Channel 2625 RX 871.5 MHz 881.5 MHz 891.5 MHz Channel 20450 Channel 20525 Channel 20600 TX 829 MHz 836.5 MHz 844 MHz 10MHz Channel 2450 Channel 2525 Channel 2600 RX 874 MHz 881.5 MHz 889 MHz RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 20775 Channel 21100 Channel 21425 TX LTE BAND 7 5MHz 2502.5 MHz 2535 MHz 2567.5 MHz RX Channel 2775 Channel 3100 Channel 5825 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 16 of 34 2622.5 MHz 2655 MHz 2687.5 MHz Channel 20800 Channel 21100 Channel 21400 TX 2505 MHz 2535 MHz 2565 MHz 10MHz Channel 2800 Channel 3100 Channel 3400 RX 2625 MHz 2655 MHz 2685 MHz Channel 20825 Channel 21100 Channel 21375 TX 2507.5 MHz 2535 MHz 2562.5 MHz 15MHz Channel 2825 Channel 3100 Channel 3375 RX 2627.5 MHz 2655 MHz 2682.5 MHz Channel 20850 Channel 21100 Channel 21350 TX 2510 MHz 2535 MHz 2560 MHz 20MHz Channel 2850 Channel 3100 Channel 3350 RX 2630 MHz 2655 MHz 2680 MHz RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 23017 Channel 23095 Channel 23173 TX 699.7 MHz 707.5 MHz 715.3 MHz 1.4MHz Channel 5017 Channel 5095 Channel 5173 RX 729.7 MHz 737.5 MHz 745.3 MHz Channel 23025 Channel 23095 Channel 23165 TX 700.5 MHz 707.5 MHz 714.5 MHz 3MHz Channel 5025 Channel 5095 Channel 5165 RX 730.5 MHz 737.5 MHz 744.5 MHz LTE BAND12 Channel 23035 Channel 23095 Channel 23155 TX 701.5 MHz 707.5 MHz 713.5 MHz 5MHz Channel 5035 Channel 5095 Channel 5155 RX 731.5 MHz 737.5 MHz 743.5 MHz Channel 23060 Channel 23095 Channel 23130 TX 704 MHz 707.5 MHz 711 MHz 10MHz Channel 5060 Channel 5095 Channel 5130 RX 734 MHz 737.5 MHz 741 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 17 of 34 RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 23025 Channel 23230 Channel 23255 TX 779.5 MHz 782 MHz 784.5 MHz 5MHz Channel 5205 Channel 5230 Channel 5255 RX 748.5 MHz 751 MHz 753.5 MHz LTE BAND 13 Channel 23230 Channel 23230 Channel 23230 TX 782 MHz 782 MHz 782 MHz 10MHz Channel 5230 Channel 5230 Channel 5230 RX 751 MHz 751 MHz 751 MHz RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) TX Channel 23755 Channel 23790 Channel 23825 706.5 MHz 710 MHz 713.5 MHz 5MHz Channel 5755 Channel 5790 Channel 5825 RX 736.5 MHz 740 MHz 743.5 MHz LTE BAND 17 TX Channel 23780 Channel 23790 Channel 23800 709 MHz 710 MHz 711 MHz 10MHz Channel 5780 Channel 5790 Channel 5800 RX 739 MHz 740 MHz 741 MHz RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 40265 Channel40740 Channel 41215 5MHz TX/RX 2557.5 MHz 2605 MHz 2652.5.5 MHz Channel 40290 Channel40740 Channel 41190 10MHz TX/RX 2560 MHz 2605 MHz 2650 MHz LTE BAND 41 Channel 40315 Channel40740 Channel 41165 15MHz TX/RX 2562.5 MHz 2605 MHz 2647.5 MHz Channel 40340 Channel40740 Channel 41140 20MHz TX/RX 2565 MHz 2605 MHz 2645 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 18 of 34 RF Channel Test Mode Bandwidth TX / RX Low (L) Middle (M) High (H) Channel 131997 Channel 132322 Channel 132647 TX 1712.5 MHz 1745 MHz 1777.5 MHz 5MHz Channel 66461 Channel 66786 Channel 67111 RX 2112.5 MHz 2145 MHz 2177.5 MHz Channel 132022 Channel 132322 Channel 132622 TX 1715 MHz 1745 MHz 1775 MHz 10MHz Channel 66486 Channel 66786 Channel 67086 RX 2115 MHz 2145 MHz 2175 MHz LTE BAND 66 Channel 132047 Channel 132322 Channel 132597 TX 1717.5 MHz 1745 MHz 1772.5 MHz 15MHz Channel 66511 Channel 66786 Channel 67086 RX 2117.5 MHz 2145 MHz 2172.5 MHz Channel 132072 Channel 132322 Channel 132572 TX 1720 MHz 1745 MHz 1770 MHz 20MHz Channel 66536 Channel 66786 Channel 67036 RX 2120 MHz 2145 MHz 2170 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 19 of 34 3.6 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.7 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-823, R-4188, T-1153 and C-2383 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Industry Canada (IC) Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3. 3.8 Deviation from Standards None. 3.9 Abnormalities from Standard Conditions None. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 20 of 34 3.10Other Information Requested by the Customer None. 3.11 Technical Specification Characteristics Description GSM Radio System Type UMTS LTE Transmission (TX): 824 to 849 MHz GSM850 Receiving (RX): 869 to 894 MHz Transmission (TX): 1850 to 1910 MHz GSM1900 Receiving (RX): 1930 to 1990 MHz Transmission (TX): 1850 to 1910 MHz UMTS band 2 Receiving (RX): 1930 to 1990 MHz Transmission (TX): 1710 to 1755 MHz UMTS band 4 Receiving (RX): 2110 to 2155 MHz Transmission (TX): 824 to 849 MHz UMTS band 5 Receiving (RX): 869 to 894 MHz Transmission (TX): 1850 to 1910 MHz LTE band 2 Receiving (RX): 1930 to 1990 MHz Transmission (TX): 1710 to 1755 MHz LTE band 4 Receiving (RX): 2110 to 2155 MHz Supported Frequency Range Transmission (TX): 824 to 849 MHz LTE band 5 Receiving (RX): 869 to 894 MHz Transmission (TX): 2500 to 2570 MHz LTE band 7 Receiving (RX): 2620 to 2690 MHz Transmission (TX): 699 to 716 MHz LTE band 12 Receiving (RX): 729 to 746 MHz Transmission (TX): 777 to 787 MHz LTE band 13 Receiving (RX): 746 to 756 MHz Transmission (TX): 704 to 716 MHz LTE band 17 Receiving (RX): 734 to 746 MHz Transmission (TX): 2555 to 2655 MHz LTE band 41 Receiving (RX): 2555 to 2655 MHz Transmission (TX): 1710 to 1780 MHz LTE band 66 Receiving (RX): 2110 to 2180 MHz GSM850:33.3 dBm; GSM1900: 30.3dBm UMTS band 2: 24dBm; UMTS band 4: 24dBm; UMTS band 5: 24dBm Target TX Output Power LTE band 2: 24dBm; LTE band 4: 24dBm; LTE band 5: 24dBm LTE band 7: 24dBm; LTE band 12: 24dBm; LTE band 13: 24dBm LTE band 17: 24dBm; LTE band 41: 24dBm; LTE band 66: 24dBm This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 21 of 34 GSM system: 0.2 MHz UMTS system: 5 MHz 1.4 MHz; 3 MHz; 5 MHz; 10 MHz; LTE band2 15 MHz, 20 MHz LTE band5 1.4 MHz; 3 MHz; 5 MHz; 10 MHz Supported Channel Bandwidth LTE band7 5 MHz; 10 MHz; 15 MHz, 20 MHz LTE band12 1.4 MHz; 3 MHz; 5 MHz; 10 MHz LTE band13 5 MHz; 10 MHz LTE band41 5 MHz; 10 MHz; 15 MHz, 20 MHz LTE band66 5 MHz; 10 MHz; 15 MHz, 20 MHz Characteristics Description GSM850 249KGXW; 246KG7W GSM1900 246KGXW; 246KG7W UMTS band 2 4M15F9W; 4M17W7D; UMTS band 4 4M15F9W; 4M18W7D; UMTS band 5 4M15F9W; 4M17W7D; 1M10G7D;1M10W7D 2M69G7D;2M68W7D 4M49G7D;4M49W7D LTE band 2 8M95G7D;8M93W7D 13M5G7D;13M5W7D 17M9G7D;17M9W7D 1M09G7D;1M09W7D Designation of Emissions 2M69G7D;2M68W7D (Note: the necessary bandwidth of 4M48G7D;4M49W7D which is the worst value from the LTE band 4/66 8M95G7D;8M95W7D measured occupied bandwidths for each type of channel bandwidth 13M5G7D;13M5W7D configuration.) 17M9G7D;17M9W7D 1M09G7D;1M09W7D 2M69G7D;2M69W7D LTE band 5 4M48G7D;4M47W7D 8M97G7D;8M93W7D 4M48G7D;4M48W7D 8M95G7D;8M93W7D LTE band 7 13M5G7D;13M5W7D 17M9G7D;17M9W7D 1M09G7D;1M09W7D 2M69G7D;2M69W7D LTE band 12/17 4M49G7D;4M49W7D 8M93G7D;8M93W7D This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 22 of 34 4M47G7D;4M48W7D LTE band 13 8M93G7D;8M91W7D 4M48G7D;4M48W7D 8M95G7D;8M93W7D LTE band 41 13M5G7D;13M5W7D 17M9G7D;17M9W7D 4 Description of Tests 4.1 Conducted Output Power Measurement Procedure: FCC KDB 971168 D01 Power Meas License Digital Systems v03 The transmitter output was connected to a calibrated coaxial cable, attenuator and power meter, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The power output at the transmitter antenna port was determined by adding the value of the cable insertion loss to the power reading. The tests were performed at three frequencies (low channel, middle channel and high channel) and on the highest power levels, which can be setup on the transmitters. Note: Reference test setup 1 4.2 Effective (Isotropic) Radiated Power of Transmitter Measurement Procedure: FCC KDB 971168 D01 Power Meas License Digital Systems v03 Below 1GHz test procedure as below: 1). The EUT was powered ON and placed on a 1.5m high table in the chamber. The antenna of the transmitter was extended to its maximum length. 2). The disturbance of the transmitter was maximized on the test receiver display by raising and lowering from 1m to 4m the receive antenna and by rotating through 360° the turntable. After the fundamental emission was maximized, a field strength measurement was made. 3). Steps 1) and 2) were performed with the EUT and the receive antenna in both vertical and horizontal polarization. 4). The transmitter was then removed and replaced with another antenna. The center of the antenna was approximately at the same location as the center of the transmitter. 5). A signal at the disturbance was fed to the substitution antenna by means of a non-radiating cable. With both the substitution and the receive antennas horizontally polarized, the receive antenna was raised and lowered to obtain a maximum reading at the test receiver. The level of the signal generator was adjusted until the measured field strength level in step 2) is obtained for this set of conditions. 6). The output power into the substitution antenna was then measured. 7). Steps 5) and 6) were repeated with both antennas polarized. 8). Calculate power in dBm by the following formula: ERP (dBm) = Pg(dBm) – cable loss (dB) + antenna gain (dBd) Where: Pg is the generator output power into the substitution antenna. Above 1GHz test procedure as below: 1). Different between above is the test site, change from Semi- Anechoic Chamber to fully Anechoic Chamber 2). Calculate power in dBm by the following formula: EIRP(dBm) = Pg(dBm) – cable loss (dB) + antenna gain (dBi) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 23 of 34 EIRP=ERP+2.15dB Where: Pg is the generator output power into the substitution antenna. 3). Test the EUT in the lowest channel, the middle channel the Highest channel 4). The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, Only the test worst case mode is recorded in the report. 5). Repeat above procedures until all frequencies measured was complete. Note: Reference test setup 2 4.3 Occupied Bandwidth Measurement Procedure: FCC KDB 971168 D01 Power Meas License Digital Systems v03 The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured. The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyser, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel, middle channel and high channel).The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1 percent of the selected span as is possible without being below 1 percent. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a sampling detector shall be used since a peak or, peak hold, may produce a wider bandwidth than actual. The trace data points are recovered and are directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 percent of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. Note: Reference test setup 1 4.4 Band Edge at Antenna Terminals Measurement Procedure: FCC KDB 971168 D01 Power Meas License Digital Systems v03 The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyser, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel and high channel).in the 1MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of 100kHz or 1% of the emission bandwidth of the fundamental emission of the transmitter may be employed. The EUT emission bandwidth is measured as the width of the signal between two points, outside of which all emission are attenuated at least 26dB below the transmitter power. The video bandwidth of the spectrum analyzer was set at thrice the resolution bandwidth. Detector Mode was set to peak or peak hold power. Note: Reference test setup 1 4.5 Spurious And Harmonic Emissions at Antenna Terminal Measurement Procedure: FCC KDB 971168 D01 Power Meas License Digital Systems v03 The transmitter output was connected to a calibrated coaxial cable, attenuator and Spectrum analyzer, the other end of which was connected to a Base Station Simulator. The Base Station Simulator was set to force the EUT to its maximum power setting. The tests were performed at three frequencies (low channel and high channel).The level of the carrier and the various conducted spurious and harmonic frequencies is measured by means of a calibrated spectrum analyzer. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10th harmonic. On any frequency outside a licensee’s frequency block, the power of any emission shall be attenuated below the transmitter power (P) by at least 43 + 10 log(P) dB. Compliance with these provisions is based on the use of measurement instrumentation employing a resolution bandwidth of 1 MHz or greater. However, in the 1 MHz bands immediately outside and adjacent to the frequency This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 24 of 34 block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. Note: Reference test setup 1 4.6 Peak-Average Ratio Measurement Procedure: FCC KDB 971168 D01 Power Meas License Digital Systems v03 A peak to average ratio measurement is performed at the conducted port of the EUT. For WCDMA signals, the spectrum analyzers Complementary Cumulative Distribution Function (CCDF) measurement profile is used to determine the largest deviation between the average and the peak power of the EUT in a given bandwidth. The CCDF curve shows how much time the peak waveform spends at or above a given average power level. The percent of time the signal spends at or above the level defines the probability for that particular power level. For GSM signals, an average and a peak trace are used on a spectrum analyzer to determine the largest deviation between the average and the peak power of the EUT in a bandwidth greater than the emission bandwidth. The traces are generated with the spectrum analyzer set to zero span mode. Note: Reference test setup 1 4.7 Field Strength of Spurious Radiation Measurement Procedure: FCC KDB 971168 D01 Power Meas License Digital Systems v03 Below 1GHz test procedure as below: 1). The EUT was powered ON and placed on a 150cm high table in the chamber. The antenna of the transmitter was extended to its maximum length. 2). The disturbance of the transmitter was maximized on the test receiver display by raising and lowering from 1m to 4m (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) the receive antenna and by rotating through 360° the turntable. After the fundamental emission was maximized, a field strength measurement was made. 3). Steps 1) and 2) were performed with the EUT and the receive antenna in both vertical and horizontal polarization. 4). The transmitter was then removed and replaced with another antenna. The center of the antenna was approximately at the same location as the center of the transmitter. 5). A signal at the disturbance was fed to the substitution antenna by means of a non-radiating cable. With both the substitution and the receive antennas horizontally polarized, the receive antenna was raised and lowered to obtain a maximum reading at the test receiver. The level of the signal generator was adjusted until the measured field strength level in step 2) is obtained for this set of conditions. 6). The output power into the substitution antenna was then measured. 7). Steps 5) and 6) were repeated with both antennas polarized. 8) Calculate power in dBm by the following formula: ERP(dBm) = Pg(dBm) – cable loss (dB) + antenna gain (dBd) Where: Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic source (dBi). The substitute level is equal to Pg [dBm] – cable loss [dB]. The calculated Pd levels are then compared to the absolute spurious emission limit of -13dBm which is equivalent to the required minimum attenuation of 43 + 10log10(Power [Watts]). Above 1GHz test procedure as below: 1) Different between above is the test site, change from Semi- Anechoic Chamber to fully Anechoic Chamber 2) Calculate power in dBm by the following formula: EIRP(dBm) = Pg(dBm) – cable loss (dB) + antenna gain (dBi) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 25 of 34 EIRP=ERP+2.15dB Where: Pg is the generator output power into the substitution antenna. 3. Test the EUT in the lowest channel, the middle channel the Highest channel 4. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, Only the test worst case mode is recorded in the report. 5. Repeat above procedures until all frequencies measured was complete Note: Reference test setup 3 4.8 Frequency Stability / Temperature Variation Measurement Procedure: Frequency stability testing is performed in accordance with the guidelines of FCC KDB 971168 D01 Power Meas License Digital Systems v03 . The frequency stability of the transmitter is measured by: a.) Temperature: The temperature is varied from -30°C to +50°C in 10°C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. Specification – The frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. The frequency stability of the transmitter shall be maintained within ±0.00025% (±2.5 ppm ) of the center frequency. Time Period and Procedure: 1. The carrier frequency of the transmitter is measured at room temperature (20°C to provide a reference). 2. The equipment is turned on in a “standby” condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10°C intervals ranging from -30°C to +50°C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Note: Reference test setup 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 26 of 34 4.9 Test Setups 4.9.1 Test Setup 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 27 of 34 4.9.2 Test Setup 2 Figure 1. 30MHz to 1GHz Figure 2. above 1GHz Figure 1. 30MHz to 1GHz Figure 2. above 1GHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 28 of 34 4.9.3 Test Setup 3 Figure 1. Below 30MHz Figure 2. 30MHz to 1GHz Figure 3. above 1GHz Figure 2. 30MHz to 1GHz Figure 3. above 1GHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 29 of 34 4.9.4 Test Setup 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 30 of 34 4.10 Test Conditions Test Case Test Conditions Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Average L, M, H Power, RF Channels (TX) Total (L= low channel, M= middle channel, H= high channel ) Transmit GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode Output UMTS/TM2;LTE/TM1;LTE/TM2 Power Test Environment Ambient Climate & Rated Voltage Data Average Test Setup Test Setup 1 Power, L, M, H Spectral RF Channels (TX) Density (if (L= low channel, M= middle channel, H= high channel ) required) GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode UMTS/TM2;LTE/TM1;LTE/TM2 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Peak-to-Average Ratio L, M, H RF Channels (TX) (if required) (L= low channel, M= middle channel, H= high channel ) GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode UMTS/TM2;LTE/TM1;LTE/TM2 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Modulation M Characteristics RF Channels (TX) (M= middle channe ) GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode UMTS/TM2;LTE/TM1;LTE/TM2 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Occupied L, M, H Bandwidth RF Channels (TX) (L= low channel, M= middle channel, H= high channel ) GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode UMTS/TM2;LTE/TM1;LTE/TM2 Bandwidth Test Environment Ambient Climate & Rated Voltage Emission Test Setup Test Setup 1 Bandwidth L, M, H RF Channels (TX) (if (L= low channel, M= middle channel, H= high channel ) required) GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode UMTS/TM2;LTE/TM1;LTE/TM2 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Band Edges L, H Compliance RF Channels (TX) (L= low channel, H= high channel ) GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode UMTS/TM2;LTE/TM1;LTE/TM2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 31 of 34 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 1 Spurious Emission at L,M, H Antenna Terminals RF Channels (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1;UMTS/TM1;LTE/TM1 Test Environment Ambient Climate & Rated Voltage Test Setup Test Setup 2 GSM/TM1;GSM/TM2;UMTS/TM1;UMTS/TM2;LTE/TM1;L Field Strength of TE/TM2; NOTE: If applicable, the EUT conf. that has Test Mode Spurious Radiation maximum power density (based on the equivalent power level) is selected. L, M, H RF Channels (TX) (L= low channel, M= middle channel, H= high channel ) (1) -30 °C to +50 °C with step 10 °C at Rated Voltage; Test Env. (2) VL, VN and VH of Rated Voltage at Ambient Climate. Test Setup Test Setup 4 Frequency Stability L, M, H RF Channels (TX) (L= low channel, M= middle channel, H= high channel ) GSM/TM1;GSM/TM2;UMTS/TM1; Test Mode UMTS/TM2;LTE/TM1;LTE/TM2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 32 of 34 5 Main Test Instruments RE in Chamber Cal. date Cal.Due date Item Test Equipment Manufacturer Model No. Inventory No. (yyyy-mm-dd) (yyyy-mm-dd) 3m Semi-Anechoic 1 ETS-LINDGREN N/A SEM001-01 2017-05-10 2018-05-10 Chamber Agilent 2 EMI Test Receiver N9038A SEM004-05 2017-10-09 2018-10-09 Technologies BiConiLog Antenna 3 ETS-LINDGREN 3142C SEM003-02 201711-15 2020-11-15 (26-3000MHz) Double-ridged horn 4 ETS-LINDGREN 3117 SEM003-11 2015-10-17 2018-10-17 (1-18GHz) Horn Antenna (18- 5 ETS-LINDGREN 3160 SEM003-12 2017-11-24 2020-11-24 26GHz) Pre-amplifier (0.1- Agilent 6 8447D SEM005-01 2017-04-14 2018-04-14 1300MHz) Technologies Compliance Pre-Amplifier (0.1- 7 Directions PAP-0126 SEM004-10 2017-10-17 2018-10-17 26.5GHz) Systems Inc. 8 Band filter Amindeon 82346 SEM023-01 N/A N/A Universal radio 9 communication Rohde &Schwarz CMU200 SEM010-01 2017-10-09 2018-10-09 tester Universal radio 10 communication Rohde &Schwarz CMW500 SEM010-03 2017-10-23 2018-10-23 tester 11 DC Power Supply Zhao Xin RXN-305D SEM011-02 2017-10-09 2018-10-09 BiConiLog Antenna 12 Schwarzbeck VULB9163 SEM003-05 2015-10-17 2018-10-17 (30MHz-3GHz) Horn Antenna 13 Rohde &Schwarz HF907 SEM003-06 2015-06-14 2018-06-14 (800MHz-18GHz) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 33 of 34 RE in Chamber Cal. Date (yyyy- Cal. Due date Item Test Equipment Manufacturer Model No. Inventory No. mm-dd) (yyyy-mm-dd) 10m Semi-Anechoic 1 SAEMC FSAC1018 SEM001-03 2017-05-10 2018-05-10 Chamber EMI Test Receiver 2 Rohde & Schwarz ESR SEM004-03 2017-04-14 2018-04-14 (9k-7GHz) Trilog-Broadband 3 Schwarzbeck VULB9168 SEM003-18 2016-06-29 2019-06-29 Antenna(30M-1GHz) Sonoma 4 Pre-amplifier 310N SEM005-03 2017-07-06 2018-07-06 Instrument Co 5 .Loop Antenna ETS-Lindgren 6502 SEM003-08 2015-08-14 2018-08-14 RF connected test Inventory Cal. date Cal.Due date Item Test Equipment Manufacturer Model No. No. (yyyy-mm-dd) (yyyy-mm-dd) Humi/ Temp 1 MingGao TH101B W006-09 2017-03-09 2018-03-09 Indicator Rohde 2 Signal Analyzer FSV W005-02 2018-03-13 2019-03-13 Schwarz 3 Barometer ChangChun DYM3 SEL0088 2017-05-24 2018-05-24 Dual Output Mobile Agilent 4 Communication DC Technologies 66319D W009-02 2017-07-23 2018-07-23 Source Inc 5 Digital Multimeter Fluke 15B+ W055-01 2017-03-09 2018-03-09 Wideband Radio Rohde & 6 CMW500 W005-02 2018-03-13 2019-03-13 Communication Tester Schwarz Wideband Radio Rohde & 7 CMW500 W005-02 2018-03-13 2019-03-13 CommunicationTester Schwarz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180100088201 Page: 34 of 34 6 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following: Test Item Extended Uncertainty Data Transmit Output Power Data Power [dBm] U = 0.37 dB Bandwidth Magnitude [%] U = 0.2% Band Edge Compliance Disturbance Power [dBm] U = 2.0 dB Spurious Emissions, Conducted Disturbance Power [dBm] U = 2.0 dB For 3 m Chamber: U = 4.5 dB (30 MHz to 1GHz) Field Strength of Spurious U = 3.3 dB (above 1 GHz) ERP [dBm] Radiation For 10 m Chamber: U = 4.5 dB (30 MHz to 1GHz) U = 3.2 dB (above 1 GHz) Frequency Stability Frequency Accuracy [ppm] U = 0.24 ppm 7 Photographs - EUT Constructional Details Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1801000882RG. The End This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.


Document Created: 2018-05-08 01:34:15
Document Modified: 2018-05-08 01:34:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC