I19Z61589-SEM02_SAR_Rev0_FCC_part3

FCC ID: 2ACCJBT17

RF Exposure Info

Download: PDF
FCCID_4454007

EX3DV4— SN:3617 January 31, 2019 10588 AAB_| IEEE 802.11a/h WiFi 5 GHz (OFDM, 36 Mbps, 90pc duty cycle) WLAN 8.76 +9.6 % 10589 AAB IEEE 802.11a/h WiFi 5 GHz (OFDM, 48 Mbps, 90pc duty cycle) WLAN 8.35 + 9.6 % 10590 AAB IEEE 802.11a/h WiFi 5 GHz (OFDM, 54 Mbps, 90pc duty cycle) WLAN 8.67 +9.6 % 10591 AAB IEEE 802.11n (HT Mixed, 20MHz, MCSO, 90pc duty cycle) WLAN 8.63 +9.6 % 10592 AAB IEEE 802.11n (HT Mixed, 20MHz, MCS1, 90pc duty cycle) WLAN 8.79 + 9.6 % 10593 AAB IEEE 802.11n (HT Mixed, 20MHz, MCS2, 90pc duty cycle) WLAN 8.64 +9.6 % 10594 AAB IEEE 802.11n (HT Mixed, 20MHz, MCS3, 90pc duty cycle) WLAN 8.74 + 9.6 % 10595 AAB IEEE 802.11n (HT Mixed, 20MHz, MCS4, 90pc duty cycie) WLAN 8.74 + 9.6 % 10596 AAB IEEE 802.11n (HT Mixed, 20MHz, MCSS, 90pc duty cycle) WLAN 8.71 + 9.6 % 10597 AAB_| IEEE 802.11n (HT Mixed, 20MHz, MCS6, 90pc duty cycle) WLAN 8.72 + 9.6 % 10598 AAB IEEE 802.11n (HT Mixed, 20MHz, MCST, 90pc duty cycle) WLAN 8.50 £9.6 % 10599 AAB IEEE 802.11n (HT Mixed, 40MHz, MCSO, 90pc duty cycle) WLAN 8.79 £9.6 % 10600 AAB IEEE 802.11n (HT Mixed, 40MHz, MCS1, 90pc duty cycle) WLAN 8.88 £9.6 % 10601 AAB IEEE 802.11n (HT Mixed, 40MHz, MCS2, 9Opc duty cycie) WLAN 8.82 £9.6 % 10602 AAB IEEE 802.11n (HT Mixed, 40MHz, MCS3, 90pc duty cycle) WLAN 8.94 £9.6 % 10603 AAB IEEE 802.11n (HT Mixed, 40MHz, MCS4, 90pc duty cycle) WLAN 9.03 £9.6 % 10604 AAB_| IEEE 802.11n (HT Mixed, 40MHz, MCSS, 90pc duty cycle) WLAN 8.76 £9.6 % 10605 AAB IEEE 802.11n (HT Mixed, 40MHz, MCS6, 90pc duty cycle) WLAN 8.97 £9.6 % 10606 AAB_| IEEE 802.11n (HT Mixed, 40MHz, MCS7, 90pc duty cycle) WLAN 8.82 + 9.6 % 10607 AAB__| IEEE 802.11ac WiFi (20MHz, MCSO, 90pc duty cycle) WLAN 8.64 + 9.6 % 10608 AAB IEEE 802.1 1ac WiFi (20MHz, MCS1, 90pc duty cycle) WLAN 8.77 £9.6 % 10609 AAB_| IEEE 802.1 1ac WiFi (20MHz, MCS2, 90pc duty cycle) WLAN 8.57 + 9.6 % 10610 AAB IEEE 802.1 1ac WiFi (20MHz, MCS3, 90pc duty cycle) WLAN 8.78 +9.6 % 10611 AAB IEEE 802.1 1ac WiFi (20MHz, MCS4, 90pc duty cycle) WLAN 8.70 £9.6 % 10612 AAB IEEE 802.1 1ac WiFi (20MHz, MCS5, 90pc duty cycle) WLAN: 8.77 +9.6 % 10613 AAB IEEE 802.11ac WiFi (20MHz, MCS6, 90pc duty cycle) WLAN 8.94 £9.6 % 10614 AAB IEEE 802.11ac WiFi (20MHz, MCST, 90pc duty cycle) WLAN 8.59 £9.6 % 10615 AAB IEEE 802.1 1ac WiFi (20MHz, MCS8, 90pc duty cycle) WLAN 8.82 +9.6 % 10616 AAB IEEE 802.1 1ac WiFi (40MHz, MCSO, 90pc duty cycle) WLAN 8.82 + 9.6 % 10617 AAB IEEE 802.1 1ac WiFi (40MHz, MCS1, 9Opc duty cycle) WLAN 8.81 +9.6 % 10618 AAB IEEE 802.1 1ac WiFi (40MHz, MCS2, 9Opc duty cycle) WLAN 8.58 +9.6 % 10619 AAB IEEE 802.1 1ac WiFi (40MHz, MCS3, 90pc duty cycle) WLAN 8.86 +9.6 % 10620 AAB IEEE 802.11ac WiFi (40MHz, MCS4, 90pc duty cycle) WLAN 8.87 £9.6 % 10621 AAB IEEE 802.1 1ac WiFi (40MHz, MCSS5, 90pc duty cycle) WLAN 8.77 £9.6 % 10622 AAB IEEE 802.1 1ac WiFi (40MHz, MCSG, 90pc duty cycle) WLAN 8.68 +9.6 % 10623 AAB IEEE 802.1 1ac WiFi (40MHz, MCS7, 90pc duty cycle) WLAN 8.82 £9.6 % 10624 AAB IEEE 802.1 1ac WiFi (40MHz, MCS8, 90pc duty cycle) WLAN 8.96 £9.6 % 10625 AAB IEEE 802.1 1ac WiFi (40MHz, MCS9, 90pc duty cycle) WLAN 8.96 + 9.6 % 10626 AAB_| IEEE 802.11ac WiFi (BOMHz, MCSO, 90pc duty cycle) WLAN 8.83 £9.6 % 10627 AAB IEEE 802.1 1ac WiFi (BOMHz, MCS1, 90pc duty cycle) WLAN 8.88 +9.6 % 10628 AAB_| IEEE 802.11ac WiFi (BOMHz, MCS2, 90pc duty cycle) WLAN 8.71 +9.6 % 10629 AAB_| IEEE 802.11ac WiFi (BOMHz, MCS3, 90pc duty cycle) WLAN 8.85 +9.6 % 10630 AAB_| IEEE 802.11ac WiFi (BOMHz, MCS4, 90pc duty cycle) WLAN 8.72 +9.6 % 10631 AAB IEEE 802.1 1ac WiFi (BOMHz, MCSS5, 90pc duty cycle) WLAN 8.81 +9.6 % 10632 AAB_| IEEE 802.11ac WiFi (BOMHz, MCS6, 90pc duty cycle) WLAN 8.74 +9.6 % 10633 AAB_| IEEE 802.11ac WiFi (BOMHz, MCS7, 90pc duty cycle) WLAN 8.83 + 9.6 % 10634 AAB_| IEEE 802.11ac WiFi (BOMHz, MCSB, 90pc duty cycle) WLAN 8.80 +9.6 % 10635 AAB_| IEEE 802.11ac WiFi (BOMHz, MCS9, 90pc duty cycle) WLAN 8.81 +9.6 % 10636 AAC_| IEEE 802.11ac WiFi (160MHz, MCSO, 90pc duty cycle) WLAN 8.83 +9.6 % 10637 AAC IEEE 802.1 1ac WiFi (160MHz, MCS1, 90pc duty cycle) WLAN 8.79 +9.6 % 10638 AAC IEEE 802.11ac WiFi (160MHz, MCS2, 90pc duty cycle) WLAN 8.86 +9.6 % 10639 AAC IEEE 802.1 1ac WiFi (160MHz, MCS3, 9Opc duty cycle) WLAN 8.85 +9.6 % 10640 AAC IEEE 802.1 1ac WiFi (160MHz, MCS4, 9O0pc duty cycle) WLAN 8.98 +9.6 % 10641 AAC IEEE 802.1 1ac WiFi (160MHz, MCSS, 90pc duty cycle) WLAN 9.06 +9.6 % 10642 AAC IEEE 802.1 1ac WiFi (160MHz, MCS6, 9O0pc duty cycle) WLAN 9.06 + 9.6 % 10643 AAC IEEE 802.1 1ac WiFi (160MHz, MCS7, 90pc duty cycle) WLAN 8.89 + 9.6 % 10644 AAC IEEE 802.11ac WiFi (160MHz, MCSBS, 90pc duty cycle) WLAN 9.05 +9.6 % 10645 AAC IEEE 802.1 1ac WiFi (160MHz, MCS9, 9Opc duty cycle) WLAN 9.11 £9.6 % 10646 AAF LTE—TDD (SC—FDMA, 1 RB, 5 MHz, QPSK, UL Subframe=2,7) LTE—TDD 11.96 £9.6 % 10647 AAF LTE—TDD (SC—FDMA, 1 RB, 20 MHz, QPSK, UL Subframe=2,7) LTE—TDD 11.96 £9.6 % 10648 AAA CDMA2000 (1x Advanced) CDMA2000 3.45 £9.6 % 10652 AAD LTE—TDD (OFDMA, 5 MHz, E—TM 3.1, Clipping 44%) LTE—TDD 6.91 £9.6 % 10653 AAD_| LTE—TDD (OFDMA, 10 MHz, E—TM 3.1, Clipping 44%) LTE—TDD 742 £9.6 % 10654 AAD_| LTE—TDD (OFDMA, 15 MHz, E—TM 3.1, Clipping 44%) LTE—TDD 6.96 + 9.6 % Certificate No: EX3—3617_Jan19 Page 18 of 19

© EX3DV4— SN:3617 10655 10658 10659 10660 10661 10662 AAE AAA AAA AAA AAA AAA LTE—TDD (OFDMA, 20 MHz, E—TM 3.1, Clipping 44%) Pulse Waveform (200Hz, 10%) Pulse Waveform (200Hz, 20%) Pulse Waveform (200Hz, 40%) Pulse Waveform (200Hz, 60%) Pulse Waveform (200Hz, 80%) LTE—TDD Test Test Test Test Test January 31, 2019 7.21 10.00 6.99 3.98 2.22 0.97 + 9.6 % £9.6 % + 9.6 % £9.6 % + 9.6 % + 9.6 % 10670 AAA Bluetooth Low Energy Bluetooth 2.19 + 9.6 % © Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EX3—3617_Jan19 Page 19 of 19

No.I19Z61589-SEM02 Page 57 of 65 ANNEX H Dipole Calibration Certificate 2450 MHz Dipole Calibration Certificate ©Copyright. All rights reserved by CTTL.

x x w1 0e Callbl"atlon Laboratory of S\\\\\\//\/fl?’; S Schweizerischer Kalibrierdienst Schmid & Partner ilafifié c Service suisse d‘étalonnage Engmeenng AG | | %@\3 5 Ser-wz:o sjnzze.ro di tar.atura Zeughausstrasse 43, 8004 Zurich, Switzerland + I/I\\ ® Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—853_Jul19 Page 2 of 8

) (In S Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASY5 V52.10.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 37.6 16 % 1.85 mho/m + 6 % Head TSL temperature change during test «0.5°C SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.2 Wikg SAR for nominal Head TSL parameters normalized to 1W 51.6 W/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.13 Wkg SAR for nominal Head TSL parameters normalized to 1W 24.2 Wikg * 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 50.8 +6 % 2.02 mho/m + 6 % Body TSL temperature change during test «65 °C SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 13.4 Wikg SAR for nominal Body TSL parameters normalized to 1W 52.3 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.23 Wikg SAR for nominal Body TSL parameters normalized to 1W 24.5 Wikg * 16.5 % (k=2) Certificate No: D2450V2—853_Jul19 Page 3 of 8

© Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 54.5 Q + 2.7 jQ Return Loss —25.9 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 49.6 Q + 5.6 jQ Return Loss —25.0 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.162 ns —I After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: D2450V2—853_Jul19 Page 4 of 8

8 DASY5 Validation Report for Head TSL Date: 16.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:853 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.85 S/m; & = 37.6; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: Probe: EX3DV4 — SN7349; ConvF(7.9, 7.9, 7.9) @ 2450 MHz; Calibrated: 29.05.2019 Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 $n601; Calibrated: 30.04.2019 Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 115.6 V/m; Power Drift =—0.01 dB Peak SAR (extrapolated) = 25.7 W/kg SAR(I g) = 13.2 W/kg; SAR(10 g) = 6.13 W/kg Maximum value of SAR (measured) = 21.5 W/kg dB 0 —4.40 —8.80 —13.20 —17.60 —22.00 0 dB = 21.5 W/kg = 13.32 dBW/kg Certificate No: D2450V2—853_Jul19 Page 5 of 8

Impedance Measurement Plot for Head TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 2450000 GHz 54.536 0 175.95 pH 2.7086 0 S 2450000 GHz 50.523 mU 29.358 ° Ch1Aug= 20 Chi: Start 2.25000 GHz —— Stop 2.65000 GHz 00 Ch 1 z Ch1: Start 2.25000 GHa ——— Stop 2.65000 GHz Status CH 1: E11 C" 1—Port Avg=20 Delay LCL Certificate No: D2450V2—853_Jul19 Page 6 of 8

mm> 2e e e e e e e e @771 ue DASY5 Validation Report for Body TSL Date: 17.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:853 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 2.02 S/m; & = 50.8; p = 1000 kg/m?* Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(7.94, 7.94, 7.94) @ 2450 MHz; Calibrated: 29.05.2019 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2019 e Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 e DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 110.2 V/m; Power Drift = —0.08 dB Peak SAR (extrapolated) = 26.3 W/kg SAR(I g) = 13.4 W/kg; SAR(10 g) = 6.23 W/kg Maximum value of SAR (measured) = 21.8 W/kg dB 0 —5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 21.8 W/kg = 13.38 dBW/kg Certificate No: D2450V2—853_Jul19 Page 7 of 8

Impedance Measurement Plot for Body TSL File View Channel Swesp Calibration Trace Scale Marker System Window Help 2450000 GHz 49.604 O 361.66 pH 55073 11 y 2450000 GHz 55.948 mU § 90.868 ° Ch1Avg= 20 Ch1: Start 2,25000 GHz Stop 2.65000 GHz 0.00 5.00 50000 QHz —2$.044 dB 0.00 00 00 00 00 00 00 Ch z Ch1: Start 2.25000 GHa —— Stop 2.65000 GHz Status CH 1: 511 I C* 1—Port Avg=20 Delay LCL Certificate No: D2450V2—853_Jul19 Page 8 of 8

No.I19Z61589-SEM02 Page 65 of 65 ANNEX I Accreditation Certificate ©Copyright. All rights reserved by CTTL.


Document Created: 2019-09-18 11:58:18
Document Modified: 2019-09-18 11:58:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC