I18Z61602-SEM01_SAR_Rev1_2

FCC ID: 2ACCJBT14

RF Exposure Info

Download: PDF
FCCID_4052525

No. I18Z61602-SEM01 Page 78 of 118 Picture D.5 Test positions for desktop devices D.4 DUT Setup Photos Picture D.6 ©Copyright. All rights reserved by CTTL.

No. I18Z61602-SEM01 Page 79 of 118 ANNEX E Equivalent Media Recipes The liquid used for the frequency range of 800-3000 MHz consisted of water, sugar, salt, preventol, glycol monobutyl and Cellulose. The liquid has been previously proven to be suited for worst-case. The Table E.1 shows the detail solution. It’s satisfying the latest tissue dielectric parameters requirements proposed by the IEEE 1528 and IEC 62209. Table E.1: Composition of the Tissue Equivalent Matter Frequency 835 835 1900 1900 2450 2450 5800 5800 (MHz) Head Body Head Body Head Body Head Body Ingredients (% by weight) Water 41.45 52.5 55.242 69.91 58.79 72.60 65.53 65.53 Sugar 56.0 45.0 \ \ \ \ \ \ Salt 1.45 1.4 0.306 0.13 0.06 0.18 \ \ Preventol 0.1 0.1 \ \ \ \ \ \ Cellulose 1.0 1.0 \ \ \ \ \ \ Glycol \ \ 44.452 29.96 41.15 27.22 \ \ Monobutyl Diethylenglycol \ \ \ \ \ \ 17.24 17.24 monohexylether Triton X-100 \ \ \ \ \ \ 17.24 17.24 Dielectric ε=41.5 ε=55.2 ε=40.0 ε=53.3 ε=39.2 ε=52.7 ε=35.3 ε=48.2 Parameters σ=0.90 σ=0.97 σ=1.40 σ=1.52 σ=1.80 σ=1.95 σ=5.27 σ=6.00 Target Value Note: There are a little adjustment respectively for 750, 1750, 2600, 5200, 5300 and 5600 based on the recipe of closest frequency in table E.1. ©Copyright. All rights reserved by CTTL.

No. I18Z61602-SEM01 Page 80 of 118 ANNEX F System Validation The SAR system must be validated against its performance specifications before it is deployed. When SAR probes, system components or software are changed, upgraded or recalibrated, these must be validated with the SAR system(s) that operates with such components. Table F.1: System Validation for 7514 Probe SN. Liquid name Validation date Frequency point Status (OK or Not) 7514 Head 750MHz Sep.10,2018 750 MHz OK 7514 Head 850MHz Sep.10,2018 835 MHz OK 7514 Head 900MHz Sep.10,2018 900 MHz OK 7514 Head 1750MHz Sep.10,2018 1750 MHz OK 7514 Head 1810MHz Sep.10,2018 1810 MHz OK 7514 Head 1900MHz Sep.11,2018 1900 MHz OK 7514 Head 2000MHz Sep.11,2018 2000 MHz OK 7514 Head 2100MHz Sep.11,2018 2100 MHz OK 7514 Head 2300MHz Sep.11,2018 2300 MHz OK 7514 Head 2450MHz Sep.11,2018 2450 MHz OK 7514 Head 2600MHz Sep.12,2018 2600 MHz OK 7514 Head 3500MHz Sep.12,2018 3500 MHz OK 7514 Head 3700MHz Sep.12,2018 3700 MHz OK 7514 Head 5200MHz Sep.12,2018 5250 MHz OK 7514 Head 5500MHz Sep.12,2018 5600 MHz OK 7514 Head 5800MHz Sep.12,2018 5800 MHz OK 7514 Body 750MHz Sep.12,2018 750 MHz OK 7514 Body 850MHz Sep.9,2018 835 MHz OK 7514 Body 900MHz Sep.9,2018 900 MHz OK 7514 Body 1750MHz Sep.9,2018 1750 MHz OK 7514 Body 1810MHz Sep.9,2018 1810 MHz OK 7514 Body 1900MHz Sep.9,2018 1900 MHz OK 7514 Body 2000MHz Sep.13,2018 2000 MHz OK 7514 Body 2100MHz Sep.13,2018 2100 MHz OK 7514 Body 2300MHz Sep.13,2018 2300 MHz OK 7514 Body 2450MHz Sep.13,2018 2450 MHz OK 7514 Body 2600MHz Sep.13,2018 2600 MHz OK 7514 Body 3500MHz Sep.8,2018 3500 MHz OK 7514 Body 3700MHz Sep.8,2018 3700 MHz OK 7514 Body 5200MHz Sep.8,2018 5250 MHz OK 7514 Body 5500MHz Sep.8,2018 5600 MHz OK 7514 Body 5800MHz Sep.8,2018 5800 MHz OK ©Copyright. All rights reserved by CTTL.

No. I18Z61602-SEM01 Page 81 of 118 ANNEX G Probe Calibration Certificate Probe 7514 Calibration Certificate ©Copyright. All rights reserved by CTTL.

Calibration f Laboratory of g._ Setmaizenischer Kallborerdionst Schmid & Partner £5 Service suisso ditalonnage Engineering AG go . Servito avizzero d taratura Zeughausstrasse 83, 6004 zurich, Switzeriand ow Swiss Caliration Service Accredted by the Snss Accrodtation Sorvce (GAS) Accreditaion No.: SCS 0108 The Swiss Accreditaion Service is one of the signstoris to te CA Multlateral Agroementfotherecognitiono catlration certates Glossary: TSL tissue simuleting lquid NORMy,z sensitvily in free space Come sensitvily in TSL / NORMcy;z bcP diode compression point or crest factor (1‘duty.cycle) ofthe RF signal A, 8. C, D modulation dependent inearization parameters Polarization o «» rotation around probe axis Polarization 8 8 rotation around an axis that iin the plane normalto probe axis (at measurement center), i. 0 =0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) 1EEE Std 1528—2013, ‘EEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques®, June 2013 b) 1€C 62208—1, *, "Measurement procedure forthe assessmentof Specific Absorplion Rate (SAR) from hand— held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)°, July 2016 c) 12C 62200—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximityto the human body (fequency range of 30 MHiz to 6 GHz)*, March 2010 d) KDB 865664, SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: NORMy,z: Assessed for E—field polarization 8 = 0 (f 900 MHz in TEM—call 1 > 1800 MHz: R22 waveguide). NORy,z are only intermediate values, i.,the uncertainties of NORMxy,z does not affect the E"—field uncertainty inside TSL(see below ConF). NORM(xy,z = NORMxy.z * frequency.response (see Frequency Response Chart}. This Incarization is implemented in DASY4 software versions latethan 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. DCPxy,a: DCP are numerical inearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. PAR: PAR is the Peak to Average Ratlo thatis not callbrated but determined based on the signal characteristics Auya; Bxy.z:Cay,z:Dxy.z; VRxy,z: A, B, C, D are numerical inearization parameters assessed based on the date of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS vaitage across the diode. Convand Boundary Effect Parameters: Assessein flat phantom using E—feld (or Temperature Transfer Standard forf s 800 MHz) and inside waveguide using analyticalfld distributions based on power measurements for > 800 MHiz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitvityin TSL corresponds to NORMzy.z " Conv whereby the uncertainty corresponds to that given for Cony. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extencing the validty from : 50 MHz to + 100 NMHz. Spherieal isotropy (3D deviation from isotropy); in a field of low gradients realized using a fat phantom exposed by a patchantenna. Sensor Offset: The sensor offset corresponds to the offset of viuial measurement center from the probe tip (on probe axs). No tolerance required. Connector Angle: The angle is assessed using the information gained by determining the NORMs (no uncertainty required) Centicate No: EX3—7514_Aug18 Page 2 0f 30

exsovs — sNtrst4 August 27,2018 Probe EX3DV4 SN:7514 Manufactured: November 13, 2017 Calibrated: August 27, 2018 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Cortficate No: EX3—7514_Aug18 Page 3 of 30

exsove—snizste August 27, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7514 Basic Calibration Parameters Sensor X SensorY | SensorZ Une (i22) Norm (uViVim)3 046 o44 1 ose £10.1% DoF (av)" ses oi 1 ors Modulation Calibration Parameters us Communication System Name A s c 6 ve Une® as abvay as my (2) o ow x|_co oo o on mai s5% v 00 c0 10 is 2 |_oo oo 10 se Note: For detail on UID parameters see Appendi. Sensor Model Parameters a m T2 Ts Ts Ts To i€ i2 v= msN* |_moX~! ms ve vi x 3147 241.1 37.77 3605 0.025 5.031 0.000 0325 1.005 Y 34.00 250.7 3541 Tate 0.000 5.026 0323 0201 1002 H 36.14 250.6 36.05 3627 0.254 5046 0.000 0373 1.008 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95% . 5 the uncetainies oNom XY.t do not affcthe Eeld uncetainlinside TSL (seo Pages 5 and 6) " Numerical Inoarizaton parameteruncertany notrequres. * Uncedainyis dternined using e max.devalionfom Inco esponse apnyingrectangularcisbationand is expressed fo hesquereofhe feld valve. Corticate No: EXG—7514_Augt8 Page 4 of 30

Excove—sN7s14 August 27, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7514 Calibration Parameter Determined in Head Tissue Simulating Media Relative Condustty T beph Une £(uhin)© |_Pormittvity® (Sim)® ComFX ComvEY | GonvEZ Alpha® |__(mm) (kem) 150 s2s oze 1270 i27e iaze ose i00 s133% 200 453 os7 ms? ms? i18? oor 120 a183% 4so 435 o7 1oes foss ioes on 120 +183% 750 418 o.se o7 sar 947 oas oss £120% sas «15 0.s0 one a.09 a.09 oss oss +120% 200 415 o7 o03 a03 a.03 o4s oss 2120% 1480 «05 120 824 a24 a24 oss oso +120% 1640 402 131 s22 a22 aze oms ost £120% 170 40.1 137 810 a.10 a10_| oss oss +120% 1810 400 140 zse 1ee Tee oss ost +120% 1900 400 140 z2s z33 73e os1 oso +120% 2000 400 140 zse 7ea zes oso ost 2120% 2100 sos 149 z5t 757 Leu oar oss £120% 2300 sos 167 zaz 742 742 ost oso £120% 2450 so2 180 635 s95 65 oss oss +120% 2600 so0 186 692 s92 602 oms 105 +120% 3500 sre 201 ore ar8 o8 ore ost a131% 3700 o7.7 312 s1 s1 se1 o4 oss £19.1% s200 se 466 sos sos 505 o40 180 a18.1% seso s50 471 5o2 sor 502 o0 180 a131% se00 350 476 40e 409 4.99 o4 180 £181% 5500 356 498 aso as0 ass | o« 180 181% se00 s55 sor aan a41 as1_| oso 180 s131% s7so ss4 522 447 a47 447 o0 180 a131% seoo s53 s27 442 a42 442 o« 180 a181% © Frequency vality above 300 Wz of x 100 MHz onl appiesfoDASY .4 and Nigrer (se Page2elso t is resticted to + 50Mz The uncerainy s theRBS ofthe GoovE uncetinyat caloration rauency and the uncetintyfo e inicate requency band. Frequency valdty peto at 190Nt is 50 MHz. Above 5 Ge frequencyvadiy can bo extended to 2 10 N. Atftoquendies below 3 Gitz,the valdy oflssue parameters(sand ) can b relareto # 10% i loutd compensation omutais agled t imeasured SAvalus, t reavencies atove 3 GHe.thevaldiy o Ussue parameters (and a) is restfted o# $%. The uncertainy s the RSS of tne Gorveuncetaintfo inclcate trget tsoue parametors. * Aphe/Deotharedetermined dutngcalbratonSPEAG varranstattheremining deviaton duetothe boundary effect fter compensation is ahways lessthan 19 fo raquencies below 3 GHz and below # 2% fo requencies baten 28 GHizat any dstance largerthan hal the probet diametertrom the boundory Gertficate No: EX3—7514_Augte Page 5 of 30

®covs—sNzsie August 27, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7514 Calibration Parameter Determined in Body Tissue Simulating Media Relative Condustivity bepth® Une £(ukin® |_Pormitivity® (Sm)" ComPX ComEY ComEZ Aipha® |__(mm) (ea) 150 s1.9 080 i2as i2as i2as on i0 e133% 300 se2 082 i13 i13e i138 ons 120 a133% aso ser 084 m3 13x m3 ons i2 e133% 750 se5 ose ass se8 ase ost 104 2120% sas seo o7 o4r oar 947 ous os0 +120% 200 550 105 934 934 o.34 ous oss +120% 1450 s4.0 130 a0e ao2 s.02 ost os0 +120% 1640 ser 142 735 185 7.es o42 ost £120% 17e0 se4 149 78 782 reo ose oss +120% 1810 se3 182 zse 169 Leeo ose os +120% 1900 ses 182 z53 zs3 Tss oss oss +120% 2000 ses 152 7as zas 7as ose oso 1120% 2100 sa2 182 730 730 130 ose om +120% 2300 s20 181 7as z2s ues osr oss £120% 2450 se.r 185 Tis 7is Tis ose osr +120% 2500 s25 216 708 708 706 om 110 +120% 2500 s13 s31 o85 s85 sss on 100 a181% 3700 51.0 ase ars a7s es om 10 a131% 5200 490 s30 aso aso «se oso 180 a18.1% soso 480 536 454 454 ase oso 18 r131% seoo 189 s42 449 449 «40| oso 180 a181% 5500 186 ses 447 417 a17 oso 180 a131% 5600 48.5 57 400 4.00 4.00 0.50 1.90 #13.4% s7so 183 504 s38 s98 see oso 1890 a181% seoo 182 6.00 320 394 ss oso 18 a181% 5 Erequency valityabove 300 itz of x 100 Mz ony aplesforDASY vi.4and higher se Page2else i restictadto+ S0 ME The uneerainy is the RSS ofthe ConvEuncerainy at aliraton reqsency and thauncetainy fotha iclcted raquency band. Frequency valdiy balow at 150 it is2 50 MHz. Above S Gz frequeney valiiy can be extended to 2 10 NHz. * Attrequencias below 3 Gite, the vadty of ssuo paramelers(s and a) can be relased t + 10% i Iqul compensaton formuta s aplld to measured SA valus, t requencias above 3 GHe,thevaldity o ssue paramolers (and #)i restiledto + 5%. Thuncertainy is the RSS of tne Gorn£ urcetaintfoinicated trgettsoue parametors ° Alpha/Dopinare deternined curing caltraton. SPEAG wartnts hat the remaining devitiondueto he bounday efecatercompensationis avays lessthan : 19 fofequenciosbelow 3 GHz and below + 2% forfegvencas betueen 26 GHi at ny dstance largorthan halthe probe t dameterfom the boondoy. Certicate No: EX3—7514_Augte Page 6or 30

©xcove—sNzsne August 27,2018 Frequency Response of E—Field Frequency response (normalized) (TEM—Cel 110 EXX, Waveguide: R22) Uncertainty of Frequency Response of E—field: 2 6.3% (k=2) Centicate No: EX3—7514_Augto Page 7 of 30

exove—snzste August 27,2018 Receiving Pattern (¢), 9 = 0° £=600 MHz,TEM 121800 MHz,R22 + wl x. «s To x 4 roir) whtle «ht s Uncertainty of Axial Isotropy Assessment: £.0.5% (k=2) Certfcate No: EX3—7514_Augt8 Page 8 of 30

exsovs~stizste August 27, 2018 Dynamic Range f(SARneaq) (TEM cell , fevar= 1900 MH2z) Input Signal uV * * 7 t0° 101 10 10 10 10 SAR {mWoms] not compensated wrnglsmd Eror gB) . 1 d1 do tor too SAR [mWiem?] net compansnted compensated Uncertainty of Linearity Assossmont: £ 0.6% (k=2) Certficate No: EXG—7514_Augto Page 9 or30

Exsove— sN751¢ August 27, 2018 Conversion Factor Assessment 1= 900 MHz.WGLS Ro (4_com) 1= 1810 MHzWGLS R22 (1_cons?) ,» ? & s so sppurms ol Bs * oaeg * #. — — ay * se 7 E. Deviation from Isotropy in Liquid Error (§, 8), £ = 900 MHz 10 cos cos .o« o2 oo o2 o4 os os 10 Uncertainty of Sphorical Isotropy Assossment: £ 2.6% (k=2) Cortficate No: EX3—7514_Augto Page 10 of 39

EX3DV4— SN:7514 August 27, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7514 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) —19.8 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 1.4 mm Certificate No: EX3—7514_Aug18 Page 11 of 39 Nn ey n n en n n n nge e n ++ >

No. I18Z61602-SEM01 Page 92 of 118 ANNEX H Dipole Calibration Certificate 835 MHz Dipole Calibration Certificate ©Copyright. All rights reserved by CTTL.

® Calibration 4 Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzeriand Accredted by the Swiss Accredtation Sorvice (SAS) s Sehweizerischer Kallbrierdienst q Service suisse i‘étatonnage Servitio svizzoro di taratura 5. swiss Caltbration Service Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the aignatories to the EA Multlateral Agroomantfor the recogn‘tion ofcallration certfieatos Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z NA not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)®, July 2016 c IEC 62209—2, "Procedureto determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)®, March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. * SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95% . Certficate No: DB3V2—40060_Jut7 Page 2 of 8

Measurement Conditions DASY system confiquration, as far as not given on page 1. DASY Version Dasys vse.100 Extrapolation Advanced Extrapolation Phantom Medular Fiat Phantom Distance Dipole Gnter — TSL 15 mm with Spacer Zoom Sean Resolution t dy, dz ~5 mm Frequency 805 MHza 1 MHz Head TSL parameters The following paramaters and calculations were applied. Temperature Permittivity Conduetivity Nominal Head TSL parameters 220°0 415 0.90 mhoim Measured Head TSL parameters @20 02)°C 40826 % 0.91 mhoim6% Head TSL temperature change during test <o5°c m SAR result with Head TSL SAR averaged over 1 om(1 g) of Head TSL Conditin SAR measured 250 mW input power 297 Who SAR for nominal Head TSL parameters normalized to 1W 9.37 Whg = 17.0 % (ke2) SAR averaged over 10 em(10 g) of Head TSL condition SAR measured 250 mW input power 158 Wha SAR for nominal Head TSL paramsters normalized to 1W 6.06 Wikg =16.5 % (k=2) Body TSL parameters The following parameters and calculations were apolied. Temperature Permitivity Conductivity Nominal Body TSL parameters 22.0°C 562 0.87 mhoim Measured Body TSL parameters gao02)°C 54626% 1.01 mhoim6% Body TSL temperature change during test <05°C ~— SAR result with Body TSL SAR averaged over 1 om? (1 g) of Body TSL Gondition SAR measured 250 mW input power 243 Whg SAR for nominal Body TSL parameters normalized to 1W 8.41 Whkg 2 17.0 % (k=2) SAR averaged over 10 cm? (10 g) of Body TSL condition SAR measured 250 mW input power 157 whg SAR for nominal Body TSL parametars normalized to 1W 6.12 Wikg 2 16.5 % (k=2) Certficate No: DB35V2—40060_Jut17 Page 3 of 8

P Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point sein—12j0 Retum Loss —82.4 08 Antenna Parameters with Body TSL Impodance, transformed to feed point «ren—sin ReturLoss —25.0 08 General Antenna Parameters and Design [Electrical Detay (one direction) | 1302 ns Alfter long term use with 100W radiated power, only a sight warming of the dipole near the feedpoint can be measured The dipole is made of standard sermiigid coaxial cable. The center conductor of the feeding line is direcy connected to the second arm ofthe dipole. The antenna is therefore shor:—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching whon loaded according to the position as explained in the ‘Measurement Condiions* paragraph. The SAR data are not affected by this change. The overall dipole length is stll according to the Standard. No excessive force must be applled to the dipole arms, because they might bnd or the soldered connections noar the feedpoint may be damaged. Additional EUT Data Menutactured by sraag Menufactured on November 09, 2007 Certficate No: DB3SV2—44069_Ju17 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 19.07.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN:40069 Communication System: UTD 0 — CW; Frequency: 835 MHz Medium parameters used: (=835 MHz: a=0.91 S/m; &= 40.8; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASY5 (IEEEAIEC/ANST C63.19—201 1 DASY52 Configuration: * Probe: EX3DV4 — SN7349; ConvF(10.07, 10.07, 10.07); Calibrated: 31.05.2017; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 28.03.2017 * Phantom: Flat Phantom 4.9 (front); Type: QD OOL P49 AA; Serial: 1001 «_ DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417) Dipole Calibration for Head Tissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=3mm, dy=5mm, dz=5mm Reference Value = 62.08 V/m; Power Drift = —0.02 dB Peak SAR (extrapolated) = 3.65 W/kg SAR(L g) =2.37 W/kgs SAR(IO g) = 1.53 Wikg Maximum value of SAR (measured) = 3.21 Wke dB 0 —2.20 ~4.40 —6.60 —80.00 +11.00 0 dB =3.21 Wikg = 5.07 dBWike Certficate No: De3SV2—40060_Jut7 Page 5 of 8

Impedance Measurement Plot for Head TSL 19 w 2eir. coiseres san i uis u samse rirsee d6241pr #35.000 ac0 nz * * Sthet cas.o00 one nine Sto 1 aa5.000 s00 mz Cortficate No: DB3SV2—44069.Jult7 Page 6 of 8


Document Created: 2018-10-26 09:42:52
Document Modified: 2018-10-26 09:42:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC