RF Exposure

FCC ID: 2ACB3T-MAX

RF Exposure Info

Download: PDF
FCCID_3747564

                            ®
  A\G                           & T I % i!
                                Attestation of Global Compliance



                 RF Exposure evaluation


                 Product Description: Helmet Bluetooth Intercom Headset
                 Model Number: T—Max
                 FCC ID: 2ACB3T—MAX

                 According to 447498 D01 General RF Exposure Guidance v05 The 1—g and 10—9 SAR test
                 exclusion thresholds for 100 MHz to 6 GHz at test separation distances < 50 mm are
                 determined by: [{(max. power of channel, including tune—up tolerance, mW)/({min. test
                 separation distance, mm)] [Vf(GHz)] < 3.0 for 1—g SAR and < 7.5 for 10—g extremity SAR,
                 where
                   f(GHz) is the RF channel transmit frequency in GHz
                   Power and distance are rounded to the nearest mW and mm before calculation



                 According to the follow transmitter output power (Pt) formula:
                 Pt= (E x d) 2/ (30 x gt)
                 Pt=transmitter output power in watts
                 gt=numeric gain of the transmitting antenna (unitess)
                 E=electric field strength in V/m
                 d=measurement distance in meters (m)


                   According to the formula described above:
                   Emax=98.88dBuv/m=0.088V/m, d=3m, gi=1.58
                   P;= ( E x d ) */ ( 30 x g; ) =(0.088x3)" / (30x1.58)=0.001470W=1.47mW


                    The result is rounded to one decimal place for comparison

                    Worse case is as below: [2480MHz —1.47mW output power]

                    (1.47mW / Smm)*[v2.480(GHz)]                        =     0.46 <3.0 for 1 — g SAR
                    Then SAR evaluation is not required


                    NOTE: For the maximum power, you can refer FCC test report.




The results ’m,6tison|
                  o thisfeaost report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document
is issued by/A C§€ this docu/m it cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be
confirmed tfittp://www.agc-% t.com.
             o

Attestatic                   >ginpliance              Tel: +86—755 2908 1955            Fax: +86—755 2600 8484             E—mail: agc@agc—cert.com             @ 400 089 2118
                                                      Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China



Document Created: 2018-02-07 15:06:14
Document Modified: 2018-02-07 15:06:14

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC