SAR Report pt2

FCC ID: 2ACA9-10002V

RF Exposure Info

Download: PDF
FCCID_4034222

3 sIEMIC A Bureau Verites Group Company —— Exptnia. en rase August 21, 2017 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7 469 Calibration Parameter Determined in Body Tissue Simulat ing Media E Relative Conductivity £(MHz)* Permittivity® Depth ° Unc (S/m)" ConvF X ConvF Y¥ ConvFZ Aipha®| _(mm) (k=2) 835 55.2 0.97 11.09 11.09 11.09 0.44 0.80 £12.0 % 900 55.0 1.05 10.93 10.93 10.93 0.48 0.80 +12.0 % 1750 53.4 1.49 9.38 9.38 9.38 0.30 0.95 £12.0 % 1900 53.3 1.52 8.90 8.90 8.90 0.42 0.92 £12.0 % 2450 52.7 1.95 8.50 8.50 8.50 0.39 0.90 £12.0 % 5250 48.9 5.36 5.41 5.41 5.41 0.40 1.90 £13.1 % 5600 48.5 5.77 4.65 4.65 4.65 0.45 1.90 £13.1% 5750 48.3 5.94 4.90 4.90 4.90 0.50 1.90 £13.1% & Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz "At frequencies below 3 GHz, the validity of tissue parameters (c and a) can be relaxed to £ 10%if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (c and 0) is restricted to + 5%. The uncertainty is the RSS the ConvF uncertainty for indicated target tissue parameters of € Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3—7469_Aug17 Page 6 of 38 e 9 gr=g

a siemIc A Bureau Verites Group Company EX3DV4— SN:7469 August 21, 2017 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) Frequency response (normalized) 0.6— 0.5 :: JO4O4 ; 1 L—1 1| ; £_3 3 4 f pod d ; 1 1 { N 0 500 1000 1500 2000 2500 3000 f [MHz] S *) 3 R22 Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: EX3—7469_Aug17 Page 7 of 38 H—~5

3 siemIc A Bureau Verites Group Company ——— EX3DV4— SN:7469 August 21, 2017 Receiving Pattern (¢), 9 = 0° f=600 MHz,TEM 1=1800 MHz.R22 « % t + & ® ® & ® e ® ¢ Tot X Y 2 Tot x « a — j f } N S § 001:1 mfiwmwu“—gflflA i ~a— % i n w t i 0 e iedaibrpnnatre henirentiendenenerers ies —— 1 1 1 1 1 1 1 1 1 1 1 i 1 1 1 1 1 t i T f ~150 100 50 ) 50 100 180 Ts h Roll ["] § * & ® mmfi)H: 600 MHz WEO'G'J\AHZ 2500 MHz Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—7469_Aug17 Page 8 of 38 H—~5

3 siemIc A Bureau Verites Group Company EX3DV4— SN:7469 Dynamic Range f(SARneaq) (TEM cell , fey;= 1900 MHz) Input Signal [uV) 10‘ 10 10‘ SAR [mW/icm3] 4 & not compensated compensated 2 a S 5 0— it ; '/—"*fsi"_',r.__‘r . :’—':*—‘0‘.—-“.-‘-——0-—..%'——.”' > a /f | > lE L & 2 t Y T T 103 102 101 10° 101 102 103 SAR {mW/em3] _ * ® | not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—7469_Aug17 Page 9 of 38 H—~5

2 1 S?EM[C A Bureau Verites Group Company — EX3DV4— SN:7469 August 21, 2017 Conversion Factor Assessment f= 835 MHz,WGLS RY (H_convF) f= 1900 MHz.WGLS R22 (H_convF) sar rghw 2 s o »s o s zo x x «0 2 {mm} 5 z {mm] *) * * measired andhica Deviation from Isotropy in Liquid Error (6, 8), f = 900 MHz iation —1.0 —0.8 —0.6 —0.4 —0.2 00 02 04 0.6 08 1.0 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EX3—7469_Aug17 Page 10 of 38 n~~"g

3 sIEMIC —— A Bureau Verites Group Company EX3DV4— SN:7469 August 21, 2017 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7469 Other Probe Parameters Sensor Arrangement ‘ Triangular Connector Angle (°) 117.3 Mechanical Surface Detection Mode enabled |Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter | 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 1.4 mm | Certificate No: EX3—7469_Aug17 Page 11 of 38 e 9 gr=g

Test report No. FCC-IC_SAR_SL18022601-SEV-001 Page 106 of 131 Annex D. Dipoles Calibration Report 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

3 sIEMIC A Bureau Verites Group Company =——— Calibration Laboratory of Schmid & Partner w4 S Schweizerischer Kalibrierdienst 7 Engineering AG C Service suisse d‘étalonnage Zeughausstrasse 43, 8004 Zurich, iacvrk Servizio svizzero di taratura Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of Accreditation No.: SCS 0108 the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client SIEMIC Inc Certificate No: D2450V2—1002_Aug17 CALIBRATION CERTIFICATE Object D2450V2 — SN:1002 Calibration procedure(s) QA CAL—05.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: August 17, 2017 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—17 (No. 217—02521/02522) Apr—18 Power sensor NRP—Z91 SN: 103244 04—Apr—17 (No. 217—02521) Apr—18 Power sensor NRP—Z91 SN: 103245 04—Apr—17 (No. 217—02522) Apr—18 Reference 20 dB Attenuator SN: 5058 (20k) 07—Apr—17 (No. 217—02528) Apr—18 Type—N mismatch combination SN: 5047.2 / 06327 07—Apr—17 (No. 217—02529) Apr—18 Reference Probe EX3DV4 SN: 7349 31—May—17 (No. EX3—7349_May17) May—18 DAE4 SN: 601 28—Mar—17 (No. DAE4—601_Mar17) Mar—18 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: US37292783 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—16) In house check: Oct—18 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—16) In house check: Oct—18 Network Analyzer HP 8753E SN: US37390585 18—Oct—01 (in house check Oct—16) In house check: Oct—17 Name Function Signature Calibrated by: Johannes Kurikka Laboratory Technician .y/r/- pyram Approved by: Katia Pokovic Technical Manager /M«- Issued: August 22, 2017 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2450V2—1002_Aug17 Page 1 of 8 o9 c 00 grag:

a I S?EM[C A Bureau Verites Group Company — j Calibration Laboratory of Schmid & Partner S Schweizerischer Kalibrierdienst Engineering AG C Service suisse d‘étalonnage Zeughausstrasse 43, 8004 Zurich, Switzer Servizio svizzero di taratura land S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of Accreditation No.: SCS 0108 the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Follow ing Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the asses sment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorp tion Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequen cy indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measur ed with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenn a feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertain multiplied by the coverage factor k=2, which for a normal distribut ty of measurement ion corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—1002_Aug17 Page 2 of 8 o9 c 00 grag:

) Tt siEMmIC A Bureau Veritas Group Company Measurement Conditions DASY system configuration, as far as not iven onpage 1. DASY Version DASYS V52.10.0 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 37.8 +6 % 1.87 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged over 1 em* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.3 Wikg SAR for nominal Head TSL parameters normalized to 1W 51.8 W/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.17 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.3 Wikg x 16.5 %(k=2) Body TSL parameters The followingparameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 52.1 £6% 2.04 mho/m + 6 % Body TSL temperature change during test <0.5 °C ~—— «> SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 13.0 W/kg SAR for nominal Body TSL parameters normalized to 1W 50.8 W/kg + 17.0 %(k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.09 W/kg SAR for nominal Body TSL parameters normalized to 1W 24.0 Wikg + 16.5 % (k=2) Certificate No: D2450V2—1002_Aug17 Page 3 of 8 pa 9 avaviavepte aceprcwinnrree qs arsaape ces ~o 9n >

3 sIEMIC A Bureau Verites Group Company Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 53.9 Q + 2.6 jQ Return Loss — 27.0 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 49.3 Q + 4.1 jQ Return Loss —27.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.154 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 29, 2016 Certificate No: D2450V2—1002_Aug17 Page 4 of 8 n~~g

3 I S?EM[C A Bureau Verites Group Company — ‘ DASY5 Validation Report for Head TSL Date: 17.08.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:1002 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.87 $/m; & = 37.8; p = 1000 kg/m‘ Phantom section: Flat Section Mcasurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—201 1) DASY52 Configuration: * Probe: EX3DV4 — SN7349; ConvF(8.12, 8.12, 8.12); Calibrated: 31.05.2017; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 28.03.2017 * Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 * DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 109.6 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 27.0 W/kg SAR(I g) = 13.3 W/kg; SAR(10 g) = 6.17 W/kg Maximum value of SAR (measured) = 21.3 W/kg dB ~4.80 —9.60 —14.40 —19.20 —24.00 0 dB = 21.3 W/kg = 13.28 dBW/kg Certificate No: D2450V2—1002_Aug17 Page 5 of 8 a~~"3

z> siemIc A Bureau Verites Group Company —— Impedance Measurement Plot for Head TSL 17 fAug 2017 10:55: 07 CH® sii i Uor 1 2.5940 a 2 450.000 o % Del Ca 4 i# ( 4 \ Avg 16 H1d CH2 $11 LOG 5 dB/REF —20 4B 2 450.000 000 MHz s iT~<—L__ TL Tt Et _d_,_fl-"‘_’ K. ~ Avs 16° H1d START 2 250.000 000 MHz STOP 2 650.000 000 MHz Certificate No: D2450V2—1002_Aug17 Page 6 of 8

z> . siemIc A Bureau Verites Group Company ——— DASY5 Validation Report for Body TSL Date: 17.08.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:1002 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 2.04 S/m; &, = 52.1; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: «_ Probe: EX3DV4 — SN7349; ConvF(8.1, 8.1, 8.1); Calibrated: 31.05.2017; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) «_ Electronics: DAE4 Sn601; Calibrated: 28.03.2017 * Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 * DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.0 V/m; Power Drift = —0.08 dB Peak SAR (extrapolated) = 25.4 W/kg SAR(I g) = 13 W/kg; SAR(10 g) = 6.09 W/kg Maximum value of SAR (measured) = 19.9 W/kg dB ~4.40 —8.80 ~13.20 —17.60 —22.00 0 dB = 19.9 W/kg = 12.99 dBW/kg Certificate No: D2450V2—1002_Aug17 Page 7 of 8 H—~5

3 sIEMIC —— A Bureau Verites Group Company Impedance Measurement Plot for Body TSL 17 Aug 2017 10:54:20 CHI) sii 1 U Fs 11 49.313 0 4.0527 a 263.27 pH 2 450.000 000 MHz * De 1 ca £ & & f ¥ &# | 4 fAvg 16" H1d CH2 $11 LOG 5 _dB/REF —20 dB 1:—27.663 dB 2 450.000 000 MHz bs ——_“‘*~l_ § _F——“"_Ad___ h. oene x 4 2. e P’ fvg 5 16" x—> / hy H1d START 2 250.000 aao MHz STOP 2 650.000 BGD MHz Certificate No: D2450V2—1002_Aug17 Page 8 of 8

siemIc A Bureau Verites Group Company ——— Calibration J Laboratory of lm/z S\ Schweizerischer Kalibrierdienst SChm!d & Eartner Pm * % S c Service suisse d‘étalonnage Englneerlng AG T /a > Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 2/ N S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client SIEMIC Inc Certificate No: D5GHzV2—1267_Aug17 CALIBRATION CERTIFICATE Object D5SGHzV2 — SN:1267 Calibration procedure(s) QA CAL—22.v2 Calibration procedure for dipole validation kits between 3—6 GHz Calibration date: August 24, 2017 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—17 (No. 217—02521/02522) Apr—18 Power sensor NRP—Z91 SN: 103244 04—Apr—17 (No. 217—02521) Apr—18 Power sensor NRP—Z91 SN: 103245 04—Apr—17 (No. 217—02522) Apr—18 Reference 20 dB Attenuator SN: 5058 (20k) 07—Apr—17 (No. 217—02528) Apr—18 Type—N mismatch combination SN: 5047.2 / 06827 O7—Apr—17 (No. 217—02529) Apr—18 Reference Probe EX3DV4 SN: 3508 31—Dec—16 (No. EX3—3503_Dec16) Dec—17 DAE4 SN: 601 28—Mar—17 (No. DAE4—601_Mar17) Mar—18 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: US37292783 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—16) in house check: Oct—18 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—16) In house check: Oct—18 Network Analyzer HP 8753E SN: US37390585 18—Oct—01 (in house check Oct—16) In house check: Oct—17 Name Function Signature Calibrated by: Johannes Kurikka Laboratory Technician Katja Pokovic Technical Manager /K 4 Approved by: issued: August 25, 2017 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: DSGHzV2—1267_Aug17 Page 1 of 13 n~~g

m j siemIc A Bureau Verites Group Company ——— w1 9fg Calibration . Laboratory of SA /z Schweizerischer Kalibrierdienst Schml_d & Eartner CA ifi\/iE”E—!_ S c Service suisse d‘étalonnage Engmeermg AG gy Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland %¢/'7/‘\\\‘\‘\\? S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1267_Aug17 Page 2 of 13 n~~"g

3 siemIc A Bureau Verites Group Company ——— Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.10.0 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5250 MHz +1 MHz Frequency 5600 MHz + 1 MHz 5750 MHz + 1 MHz Head TSL parameters at 5250 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.9 4.71 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 36.3 +6 % 4.54 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— «~= SAR result with Head TSL at 5250 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 100 mW input power 8.20 W/kg SAR for nominal Head TSL parameters normalized to 1W 82.1 W/kg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.34 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.4 Wikg + 19.5 % (k=2) Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.8 +6 % 4.91 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.49 W/kg SAR for nominal Head TSL parameters normalized to 1W 84.9 W / kg + 19.9 %(k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.42 Wikg SAR for nominal Head TSL parameters normalized to 1W 24.2 Wikg x 19.5 % (k=2) Certificate No: DSGHzV2—1267_Aug17 Page 3 of 13 n~~g

3 sIEMIC A Bureau Verites Group Company Head TSL parameters at 5750 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 £0.2) °C 35.6 + 6 % 5.07 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— ———— SAR result with Head TSL at 5750 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.17 W/kg SAR for nominal Head TSL parameters normalized to 1W 81.7 Wikg * 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.32 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.2 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1267_Aug17 Page 4 of 13 n~~g

3 sIEMIC —— A Bureau Verites Group Company Body TSL parameters at 5250 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.9 5.36 mho/m Measured Body TSL parameters (22.0 £0.2) °C 47.0 x6 % 5.46 mho/m x 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5250 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.78 Wi/kg SAR for nominal Body TSL parameters normalized to 1W 77.2 Wikg 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.17 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.5 Wikg + 19.5 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 £0.2) °C 46.4 x 6 % 5.93 mho/m + 6 % Body TSL temperature change during test <0.5 °C ———— sess SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.99 Wi/kg SAR for nominal Body TSL parameters normalized to 1W 79.3 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.24 Wikg SAR for nominal Body TSL parameters normalized to 1W 22.2 Wikg x 19.5 % (k=2) Certificate No: D5GHzV2—1267_Aug17 Page 5 of 13 n~~g

3 sIEMIC A Bureau Verites Group Company Body TSL parameters at 5750 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.3 5.94 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 46.2 + 6 % 6.13 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5750 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.88 W/kg SAR for nominal Body TSL parameters normalized to 1W 78.2 W/kg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.19 W/kg SAR for nominal Body TSL parameters normalized to 1W 21.7 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1267_Aug17 Page 6 of 13 n~~g

3 siemIc A Bureau Verites Group Company ——— Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL at 5250 MHz Impedance, transformed to feed point 48.1 Q — 3.0 jQ Return Loss — 28.9 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 52.6 Q + 4.0 jQ Return Loss — 26.6 dB Antenna Parameters with Head TSL at 5750 MHz Impedance, transformed to feed point 51.6 Q + 3.2 jQ Return Loss —29.0 dB Antenna Parameters with Body TSL at 5250 MHz Impedance, transformed to feed point 47.2 Q — 0.7 jQ Return Loss — 30.5 dB Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 52.4 Q + 4.8 jQ Return Loss — 25.7 dB Antenna Parameters with Body TSL at 5750 MHz Impedance, transformed to feed point 51.9 Q +4.1 jQ Return Loss —27.1 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.200 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on July 19, 2017 Certificate No: D5GHzV2—1267_Aug17 Page 7 of 13 n~~g

m j siemIc A Bureau Verites Group Company ——— DASYS5 Validation Report for Head TSL Date: 24.08.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole D5SGHzV2; Type: D5SGHzV2; Serial: DSGHzV2 — SN:1267 Communication System: UID 0 — CW; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz Medium parameters used: £ = 5250 MHz; 0 = 4.54 $/m; & = 36.3; p = 1000 kg/m> , Medium parameters used: £ = 5600 MHz; 0 =4.91 S/m; & = 35.8; p = 1000 kg/m> , Medium parameters used: f = 5750 MHz; 0 = 5.07 S/m; & = 35.6; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: * Probe: EX3DV4 — SN3503; ConvF(5.58, 5.58, 5.58); Calibrated: 31.12.2016, ConvF(5.09, 5.09, 5.09); Calibrated: 31.12.2016, ConvF(5.02, 5.02, 5.02); Calibrated: 31.12.2016; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 28.03.2017 * Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 «_ DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5250 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 72.02 V/m; Power Drift = —0.05 dB Peak SAR (extrapolated) = 30.3 W/kg SAR(1 g) = 8.2 W/kg; SAR(10 g) = 2.34 W/kg Maximum value of SAR (measured) = 18.9 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 71.78 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 33.0 W/kg SAR(1 g) = 8.49 W/kg; SAR(10 g) = 2.42 W/kg Maximum value of SAR (measured) = 20.2 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5750 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.16 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(1 g) = 8.17 W/kg; SAR(10 g) = 2.32 W/kg Maximum value of SAR (measured) = 19.6 W/kg Certificate No: D5GHzV2—1267_Aug17 Page 8 of 13 n~~g

a siemIc A Bureau Verites Group Company dB —5.00 —10.00 ~15.00 —20.00 —25.00 0 dB = 18.9 W/kg = 12.76 dBW/kg Certificate No: D5GHzV2—1267_Aug17 Page 9 of 13 H—~5

n~~"g

a siemIc A Bureau Verites Group Company ——— Impedance Measurement Plot for Head TSL 24 fhug 2017 12:00:26 CH sii i U ors 10.191 pF 5 250.000 000 MHz % CH1 Markers De l Cor q % §$—:s*" 4 / Ave 16 H1d CH2 S11 LIZ}G 5 dB/REF —20 dB 5 250.000 000 MHz T 1 T 1 I t 1 t 1 CH2 Markers s 4 4 L 4 } + 4 4 4 22 4B Cor 0 GHz . 048 dB *L 0 GHz } \\{\ $—t } } * 14—opect—= fivs — / 1{.3 t t / '2J + 4 // } f‘ H1d L } 4 } 4 START 5 000.000 000 MHz STOP 6 000.000 000 MHz Certificate No: D5SGHzV2—1267_Aug17 Page 10 of 13 n~~g

a siemIc A Bureau Verites Group Company —5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 18.1 W/kg = 12.58 dBW/kg Certificate No: DSGHzV2—1267_Aug17 Page 12 of 13 H—~5

Test report No. FCC-IC_SAR_SL18022601-SEV-001 Page 127 of 131 Annex E. DAE Calibration Report 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC-IC_SAR_SL18022601-SEV-001 Page 128 of 131 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC-IC_SAR_SL18022601-SEV-001 Page 129 of 131 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC-IC_SAR_SL18022601-SEV-001 Page 130 of 131 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC-IC_SAR_SL18022601-SEV-001 Page 131 of 131 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:


Document Created: 2019-08-30 16:21:33
Document Modified: 2019-08-30 16:21:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC