RF Exposure Info

FCC ID: 2AC9N-144619

RF Exposure Info

Download: PDF
FCCID_4195419

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 E-mail: ctl@ctl-lab.com RF EXPOSURE REPORT Report Reference No.: CTL1901176121-MPE Compiled by: Happy Guo ( position+printed name+signature) (File administrators) Tested by: Nice Nong ( position+printed name+signature) (Test Engineer) Approved by: Ivan Xie ( position+printed name+signature) (Manager) Product Name ............................ : wireless charging stand Model/Type reference ................ : 144619-00 List Model(s) ............................... : 144619-01, 144619-02 PO No. ....................................... : 393465 Trade Mark .................................. : TYPO FCC ID ....................................... : 2AC9N-144619 Applicant’s name ....................... : Cotton On USA Inc Address of applicant ................. : 16511, Trojan Way, La Miranda, California 90638, United States Test Firm ..................................... : Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Address of Test Firm ................. : Nanshan District, Shenzhen, China 518055 Test specification ....................... : Standard ...................................... : FCC Rules Part 15.207,15.209, 15.215(c) ANSI C63.10-2013 TRF Originator ............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF .................................. : Dated 2011-01 Date of Receipt ........................... : Jan. 18, 2019 Date of Test Date ........................ : Jan. 19, 2019–Jan. 28, 2019 Data of Issue............................... : Jan. 29, 2019 Result.......................................... : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.

V1.0 Page 2 of 10 Report No.: CTL1901176121-MPE TEST REPORT Jan. 29, 2019 Test Report No. : CTL1901176121-WF Date of issue Equipment under Test : wireless charging stand Model /Type : 144619-00 Listed Models : 144619-01, 144619-02 Applicant : Cotton On USA Inc Address : 16511, Trojan Way, La Miranda, California 90638, United States Manufacturer : Cotton On USA Inc Address : 16511, Trojan Way, La Miranda, California 90638, United States Test result Pass * *In the configuration tested, the EUT complied with the standards specified page 5. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

V1.0 Page 3 of 10 Report No.: CTL1901176121-MPE ** Modified History ** Revisions Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release 2019-01-29 CTL1901176121-MPE Tracy Qi

V1.0 Page 4 of 10 Report No.: CTL1901176121-MPE Table of Contents Page 1. SUMMARY ............................................................................................................................................................... 5 1.1. TEST FACILITY .............................................................................................................................................................. 5 1.2. STATEMENT OF THE MEASUREMENT UNCERTAINTY............................................................................................................... 5 2. GENERAL INFORMATION .......................................................................................................................................... 6 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3. TEST EQUIPMENT ......................................................................................................................................................... 6 3. TEST CONDITIONS AND RESULTS .............................................................................................................................. 7 3.1. APPLICABLE STANDARD.................................................................................................................................................. 7 3.2. LIMIT ......................................................................................................................................................................... 7 3.3. TEST SETUP ................................................................................................................................................................. 7 3.4. MEASUREMENT PROCEDURE .......................................................................................................................................... 8 3.5. TEST RESULT OF E AND H FIELD STRENGTH ........................................................................................................................ 8 3.6. EQUIPMENT APPROVAL CONSIDERATIONS ......................................................................................................................... 9 3.7. CONCLUSION ............................................................................................................................................................... 9 4. TEST SETUP PHOTOS OF THE EUT ........................................................................................................................... 10

V1.0 Page 5 of 10 Report No.: CTL1901176121-MPE 1. SUMMARY 1.1. Test Facility 1.1.1 Address of the test laboratory Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz. 1.1.2 Laboratory accreditation The test facility is recognized, certified, or accredited by the following organizations: IC Registration No.: 9618B The 3m alternate test site of Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered by Certification and Engineer Bureau of Industry Canada for the performance of with Registration No.: 9618B on November 13, 2013. FCC-Registration No.: 399832 Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 399832, December 08, 2017. 1.2. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 “Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements“ and is documented in the Shenzhen CTL Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for CTL laboratory is reported: Measurement Test Notes Uncertainty Transmitter power conducted ±0.57 dB (1) Transmitter power Radiated ±2.20 dB (1) Conducted spurious emission 9KHz-40 GHz ±2.20 dB (1) Occupied Bandwidth ±0.01ppm (1) Radiated Emission 30~1000MHz ±4.10dB (1) Radiated Emission Above 1GHz ±4.32dB (1) Conducted Disturbance0.15~30MHz ±3.20dB (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2.

V1.0 Page 6 of 10 Report No.: CTL1901176121-MPE 2. GENERAL INFORMATION 2.1. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 2.2. General Description of EUT Product Name: wireless charging stand Model/Type reference: 144619-00 Input Voltage: DC 5V 2A Rated power: 5W Operation frequency: 110KHz~200KHz Antenna type: Coil antennas Antenna gain: 0dBi Note: For more details, please refer to the user’s manual of the EUT. 2.3. Test Equipment Calibrated Calibrated Equipment Manufacturer Model Serial no. date until E-Field Probe HOLADAY HI3637 00052130 2018.5.20 2019.5.19 H-Field Probe HOLADAY HI3637 00052130 2018.5.20 2019.5.19 The calibration interval was one year

V1.0 Page 7 of 10 Report No.: CTL1901176121-MPE 3. TEST CONDITIONS AND RESULTS 3.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. According KDB 680106 D01 RF Exposure Wireless Charging App v03 3.2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range(MHz) Strength(V/m) Strength(A/m) (mW/cm²) (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 6 3.0 – 30 1842/f 4.89/f (900/f)* 6 30 – 300 61.4 0.163 1.0 6 300 – 1500 / / f/300 6 1500 – 100,000 / / 5 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range(MHz) Strength(V/m) Strength(A/m) (mW/cm²) (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 30 3.0 – 30 824/f 2.19/f (180/f)* 30 30 – 300 27.5 0.073 0.2 30 300 – 1500 / / f/1500 30 1500 – 100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density 3.3. Test Setup Note: A, B, C, D, E, F for six surfaces of the product.

V1.0 Page 8 of 10 Report No.: CTL1901176121-MPE 3.4. Measurement Procedure a) The RF exposure test was performed on 360 degree turn table in anechoic chamber. b) The measurement probe was placed at test distance (10cm) which is between the edge of the charger and the geometric centre of probe. c) The turn table was rotated 360d degree to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. e) The EUT were measured according to the dictates of KDB 680106 D01 RF Exposure Wireless Charging App v03. 3.5. Test Result of E and H field Strength E-Field Strength at 15 cm from the edges surrounding the EUT and 15cm from the top surface of the EUT FCC Measured E-Field Strength Values (V/m) FCC E-Field Charging Frequency E-Field Strength Battery Range Strength Test Test Test Test Test 50% Level (MHz) Limits Position A Position B Position C Position D Position E Limits (V/m) (V/m) 1% 0.145 6.59 6.57 6.64 6.25 6.15 307.0 614.0 50% 0.145 6.56 6.41 6.36 6.41 6.85 307.0 614.0 99% 0.145 5.68 6.15 5.56 5.42 5.36 307.0 614.0 H-Field Strength at 15 cm from the edges surrounding the EUT and 15cm from the top surface of the EUT FCC Measured E-Field Strength Values (A/m) FCC H-Field Charging Frequency H-Field Strength Battery Range Strength Test Test Test Test Test 50% Level (MHz) Limits Position A Position B Position C Position D Position E Limits (A/m) (A/m) 1% 0.145 0.352 0.347 0.115 0.256 0.232 0.815 1.63 50% 0.145 0.322 0.259 0.157 0.244 0.229 0.815 1.63 99% 0.145 0.254 0.228 0.136 0.211 0.214 0.815 1.63 H-Field Strength at 20cm from the top surface of the EUT Charging Frequency Measured E-Field Strength Values FCC H-Field Strength FCC H-Field Strength Battery Range (A/m) 50% Limits (A/m) Limits (A/m) Level (MHz) Test Position E 1% 0.145 0.212 0.815 1.63 50% 0.145 0.198 0.815 1.63 99% 0.145 0.187 0.815 1.63

V1.0 Page 9 of 10 Report No.: CTL1901176121-MPE 3.6. Equipment Approval Considerations The EUT does comply with KDB 680106 D01 as follow table. Requirements of KDB 680106 D01 Yes / No Description The device operate in the frequency range Power transfer frequency is less than 1 MHz Yes 110KHz~200KHz Output power from each primary coil is less The maximum output power for each Yes primary coil is 5W. than 15 watts The transfer system includes only single primary and secondary coils. This includes The transfer system includes two primary charging systems that may have multiple coils and are able to detect and allow Yes primary coils and clients that are able to coupling only between individual pairs of detect and allow coupling only between coils. individual pairs of coils. Client device is placed directly in contact Client device is placed directly in contact Yes with the transmitter. with the transmitter. Mobile exposure conditions only (portable exposure conditions are not covered by this Yes Mobile exposure conditions only exclusion). The aggregate H-field strengths at 15 cm The EUT H-field strengths at 15 cm surrounding the device and 20 cm above surrounding the device and 20 cm above the top surface from all simultaneous Yes the top surface from all simultaneous transmitting coils are demonstrated to be transmitting coils are demonstrated to be less than 50% of the MPE limit. less than 50% of the MPE limit. 3.7. Conclusion The detected emissions with a distance of 15cm surrounding the device and 20 cm above the top surface of the device are below the FCC E-Field Strength & H-Field Strength limits; and comply with the requirements of FCC KDB 680106 D01.

V1.0 Page 10 of 10 Report No.: CTL1901176121-MPE 4. Test Setup Photos of the EUT ********************** End of Report **********************


Document Created: 2019-03-05 10:22:20
Document Modified: 2019-03-05 10:22:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC