User Manual

FCC ID: 2AC7Z-WROOM32SE

Users Manual

Download: PDF
FCCID_4042023

ESP32-WROOM-32SE Datasheet L T IA EN ID NF Preliminary version 0.1 CO Espressif Systems Copyright © 2018 www.espressif.com

About This Document This document provides the specifications for the ESP32-WROOM-32SE module. Revision History For revision history of this document, please refer to the last page. L Documentation Change Notification Espressif provides email notifications to keep customers updated on changes to technical documentation. IA Please subscribe at www.espressif.com/en/subscribe. Certification T Download certificates for Espressif products from www.espressif.com/en/certificates. Disclaimer and Copyright Notice EN Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY ID OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. All liability, including liability for infringement of any proprietary rights, relating to use of information in this document is disclaimed. No licenses express or implied, by estoppel or otherwise, to any intellectual property rights are granted herein. The Wi-Fi Alliance Member logo is a trademark of the Wi-Fi Alliance. The Bluetooth NF logo is a registered trademark of Bluetooth SIG. All trade names, trademarks and registered trademarks mentioned in this document are property of their respective owners, and are hereby acknowledged. Copyright © 2018 Espressif Inc. All rights reserved. CO

Contents 1 Overview 1 2 Pin Definitions 3 2.1 Pin Layout 3 2.2 Pin Description 3 2.3 Strapping Pins 5 3 Functional Description 6 3.1 CPU and Internal Memory 6 3.2 External Flash and SRAM 6 3.3 Crystal Oscillators 6 3.4 RTC and Low-Power Management 7 4 Peripherals and Sensors 8 5 Electrical Characteristics 9 5.1 Absolute Maximum Ratings 9 5.2 Recommended Operating Conditions 9 5.3 DC Characteristics (3.3 V, 25 °C) 9 5.4 Wi-Fi Radio 10 5.5 BLE Radio 10 5.5.1 Receiver 10 5.5.2 Transmitter 11 5.6 Reflow Profile 12 13 6 Physical Dimensions 14 7 Recommended PCB Land Pattern 8 Learning Resources 15 10.1 Must-Read Documents 15 10.2 Must-Have Resources 15 Revision History 16

List of Tables 1 ESP32-WROOM-32SE Specifications 1 2 Pin Definitions 3 3 Strapping Pins 5 4 Absolute Maximum Ratings 9 5 Recommended Operating Conditions 9 6 DC Characteristics 9 7 Wi-Fi Radio Characteristics 10 8 Receiver Characteristics – BLE 10 AL 9 Transmitter Characteristics – BLE 11 TI EN ID NF CO

List of Figures 1 ESP32-WROOM-32SE Pin Layout (Top View) 3 2 Reflow Profile 12 3 ESP32-WROOM-32SE Schematics 13 4 ESP32-WROOM-32SE Peripheral Schematics 14 5 Discharge Circuit for VDD33 Rail 15 6 Reset Circuit 15 7 Physical Dimensions of ESP32-WROOM-32SE 16 8 Recommended PCB Land Pattern of ESP32-WROOM-32SE 17 AL TI EN ID NF CO

1. Overview 1. Overview ESP32-WROOM-32SE is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. ESP32-WROOM-32SE has a built-in ATECC608A chip, which acts as a secure storage for device certificates. More information about the ATECC608A chip can be found here. At the core of the module is the ESP32-D0WD chip*. The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2 S and I2 C. Note: * For details on the part numbers of the ESP32 family of chips, please refer to the document ESP32 Datasheet. The integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is all-around: using Wi-Fi allows a large physical range and direct connection to the internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection. The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. The module supports a data rate of up to 150 Mbps, and 25.72 dBm output power at the antenna to ensure the widest physical range. As such the module does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity. The operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well. Secure (encrypted) over the air (OTA) upgrade is also supported, so that developers can upgrade their products even after their release, at minimum cost and effort. The EUT has a PCB antenna for Wi-Fi & BLE, and the antenna gain is 3.77 dBi Table 1 provides the specifications of ESP32-WROOM-32SE. Table 1: ESP32-WROOM-32SE Specifications Categories Items Specifications 802.11 b/g/n (802.11n up to 150 Mbps) Protocols A-MPDU and A-MSDU aggregation and 0.4 µs guard Wi-Fi interval support Frequency range 2.4 ~ 2.5 GHz Protocols Bluetooth v4.2 BR/EDR and BLE specification NZIF receiver with –97 dBm sensitivity Bluetooth Radio Class-1, class-2 and class-3 transmitter AFH Audio CVSD and SBC SD card, UART, SPI, SDIO, I2 C, LED PWM, Motor Hardware Module interfaces PWM, I2 S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC On-chip sensor Hall sensor Espressif Systems 1 ESP32-WROOM-32SE Datasheet V0.1

1. Overview Categories Items Specifications On-board clock 40 MHz crystal Operating voltage/Power supply 2.7 V ~ 3.6 V Operating current Average: 80 mA Minimum current delivered by 500 mA power supply Recommended operating tem- –40 °C ~ +85 °C perature range L T IA EN ID NF CO Espressif Systems 2 ESP32-WROOM-32SE Datasheet V0.1

2. Pin Definitions 2. Pin Definitions 2.1 Pin Layout Keepout Zone L 1 GND GND 38 2 3V3 IO23 37 IA 3 EN IO22 36 4 SENSOR_VP TXD0 35 5 SENSOR_VN RXD0 34 6 IO34 IO21 33 39 GND T 7 IO35 NC 32 8 IO32 IO19 31 10 11 9 IO33 IO25 IO26 EN IO18 IO5 IO17 30 29 28 12 IO27 IO16 27 13 IO14 IO4 26 CMD GND IO13 IO15 CLK SD2 SD3 SD0 SD1 14 IO12 IO0 25 IO2 ID 15 16 17 18 19 20 21 22 23 24 Figure 1: ESP32-WROOM-32SE Pin Layout (Top View) NF 2.2 Pin Description ESP32-WROOM-32SE has 38 pins. See pin definitions in Table 2. Table 2: Pin Definitions CO Name No. Type Function GND 1 P Ground 3V3 2 P Power supply EN 3 I Module-enable signal. Active high. SENSOR_VP 4 I GPIO36, ADC1_CH0, RTC_GPIO0 SENSOR_VN 5 I GPIO39, ADC1_CH3, RTC_GPIO3 IO34 6 I GPIO34, ADC1_CH6, RTC_GPIO4 IO35 7 I GPIO35, ADC1_CH7, RTC_GPIO5 GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, IO32 8 I/O TOUCH9, RTC_GPIO9 GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, IO33 9 I/O TOUCH8, RTC_GPIO8 Espressif Systems 3 ESP32-WROOM-32SE Datasheet V0.1

2. Pin Definitions Name No. Type Function IO25 10 I/O GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 IO26 11 I/O GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 IO27 12 I/O GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, IO14 13 I/O SD_CLK, EMAC_TXD2 GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, IO12 14 I/O SD_DATA2, EMAC_TXD3 GND 15 P Ground L GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, IO13 16 I/O SD_DATA3, EMAC_RX_ER SHD/SD2* 17 I/O GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD IA SWP/SD3* 18 I/O GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD SCS/CMD* 19 I/O GPIO11, SD_CMD, SPICS0, HS1_CMD, U1RTS SCK/CLK* 20 I/O GPIO6, SD_CLK, SPICLK, HS1_CLK, U1CTS T SDO/SD0* 21 I/O GPIO7, SD_DATA0, SPIQ, HS1_DATA0, U2RTS SDI/SD1* 22 I/O GPIO8, SD_DATA1, SPID, HS1_DATA1, U2CTS GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, IO15 IO2 23 24 I/O I/O EN SD_CMD, EMAC_RXD3 GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0 IO0 25 I/O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, IO4 26 I/O SD_DATA1, EMAC_TX_ER ID IO16* 27 I/O I²C_SDA IO17* 28 I/O I²C_SCL IO5 29 I/O GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK NF IO18 30 I/O GPIO18, VSPICLK, HS1_DATA7 IO19 31 I/O GPIO19, VSPIQ, U0CTS, EMAC_TXD0 NC 32 - - IO21 33 I/O GPIO21, VSPIHD, EMAC_TX_EN RXD0 34 I/O GPIO3, U0RXD, CLK_OUT2 TXD0 35 I/O GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 CO IO22 36 I/O GPIO22, VSPIWP, U0RTS, EMAC_TXD1 IO23 37 I/O GPIO23, VSPID, HS1_STROBE GND 38 P Ground Notice: * Pins SCK/CLK, SDO/SD0, SDI/SD1, SHD/SD2, SWP/SD3 and SCS/CMD, namely, GPIO6 to GPIO11 are connected to the integrated SPI flash integrated on the module and are not recommended for other uses. * Pins IO16 and IO17 are connected to the ATECC608A chip. They are also brought out as module pins, but only allow I²C devices to be connected. Note that since IO16 and IO17 have internal pull-up resistors, the I²C devices should work with the matching pull-ups and no additional pull-ups outside the module are required. Espressif Systems 4 ESP32-WROOM-32SE Datasheet V0.1

2. Pin Definitions 2.3 Strapping Pins ESP32 has five strapping pins, which can be seen in Chapter 6 Schematics: • MTDI • GPIO0 • GPIO2 • MTDO • GPIO5 L Software can read the values of these five bits from register ”GPIO_STRAPPING”. During the chip’s system reset (power-on-reset, RTC watchdog reset and brownout reset), the latches of the IA strapping pins sample the voltage level as strapping bits of ”0” or ”1”, and hold these bits until the chip is powered down or shut down. The strapping bits configure the device’s boot mode, the operating voltage of VDD_SDIO and other initial system settings. Each strapping pin is connected to its internal pull-up/pull-down during the chip reset. Consequently, if a T strapping pin is unconnected or the connected external circuit is high-impedance, the internal weak pull-up/pull-down will determine the default input level of the strapping pins. EN To change the strapping bit values, users can apply the external pull-down/pull-up resistances, or use the host MCU’s GPIOs to control the voltage level of these pins when powering on ESP32. After reset, the strapping pins work as normal-function pins. Refer to Table 3 for a detailed boot-mode configuration by strapping pins. ID Table 3: Strapping Pins Voltage of Internal LDO (VDD_SDIO) Pin Default 3.3 V 1.8 V MTDI Pull-down 0 1 NF Booting Mode Pin Default SPI Boot Download Boot GPIO0 Pull-up 1 0 GPIO2 Pull-down Don’t-care 0 Enabling/Disabling Debugging Log Print over U0TXD During Booting CO Pin Default U0TXD Active U0TXD Silent MTDO Pull-up 1 0 Timing of SDIO Slave Falling-edge Input Falling-edge Input Rising-edge Input Rising-edge Input Pin Default Falling-edge Output Rising-edge Output Falling-edge Output Rising-edge Output MTDO Pull-up 0 0 1 1 GPIO5 Pull-up 0 1 0 1 Note: • Firmware can configure register bits to change the settings of ”Voltage of Internal LDO (VDD_SDIO)” and ”Timing of SDIO Slave” after booting. • ESP32-WROOM-32SE integrates a 3.3 V SPI flash, so the pin MTDI cannot be set to 1 when the module is powered up. Espressif Systems 5 ESP32-WROOM-32SE Datasheet V0.1

3. Functional Description 3. Functional Description This chapter describes the modules and functions integrated in ESP32-WROOM-32SE. 3.1 CPU and Internal Memory ESP32-D0WD contains a dual-core Xtensa® 32-bit LX6 MCU. The internal memory includes: • 448 KB of ROM for booting and core functions. L • 520 KB of on-chip SRAM for data and instructions. • 8 KB of SRAM in RTC, which is called RTC FAST Memory and can be used for data storage; it is accessed IA by the main CPU during RTC Boot from the Deep-sleep mode. • 8 KB of SRAM in RTC, which is called RTC SLOW Memory and can be accessed by the co-processor during the Deep-sleep mode. T • 1 Kbit of eFuse: 256 bits are used for the system (MAC address and chip configuration) and the remaining 768 bits are reserved for customer applications, including flash-encryption and chip-ID. 3.2 External Flash and SRAM EN ESP32 supports multiple external QSPI flash and SRAM chips. More details can be found in Chapter SPI in the ESP32 Technical Reference Manual. ESP32 also supports hardware encryption/decryption based on AES to ID protect developers’ programs and data in flash. ESP32 can access the external QSPI flash and SRAM through high-speed caches. • The external flash can be mapped into CPU instruction memory space and read-only memory space NF simultaneously. – When external flash is mapped into CPU instruction memory space, up to 11 MB + 248 KB can be mapped at a time. Note that if more than 3 MB + 248 KB are mapped, cache performance will be reduced due to speculative reads by the CPU. – When external flash is mapped into read-only data memory space, up to 4 MB can be mapped at a CO time. 8-bit, 16-bit and 32-bit reads are supported. • External SRAM can be mapped into CPU data memory space. Up to 4 MB can be mapped at a time. 8-bit, 16-bit and 32-bit reads and writes are supported. ESP32-WROOM-32SE integrates a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs. 3.3 Crystal Oscillators The module uses a 40-MHz crystal oscillator. Espressif Systems 6 ESP32-WROOM-32SE Datasheet V0.1

3. Functional Description 3.4 RTC and Low-Power Management With the use of advanced power-management technologies, ESP32 can switch between different power modes. For details on ESP32’s power consumption in different power modes, please refer to section ”RTC and Low-Power Management” in ESP32 Datasheet. L T IA EN ID NF CO Espressif Systems 7 ESP32-WROOM-32SE Datasheet V0.1

4. Peripherals and Sensors 4. Peripherals and Sensors Please refer to Section Peripherals and Sensors in ESP32 Datasheet. Note: • External connections can be made to any GPIO except for GPIOs in the range 6-11. These six GPIOs are connected to the module’s integrated SPI flash. • Pins IO16 and IO17 on the module are connected to the ATECC608A chip. They are also brought out as module pins, but only allow I²C devices to be connected. L • For details, please see Section 6 Schematics. T IA EN ID NF CO Espressif Systems 8 ESP32-WROOM-32SE Datasheet V0.1

5. Electrical Characteristics 5. Electrical Characteristics 5.1 Absolute Maximum Ratings Stresses beyond the absolute maximum ratings listed in the table below may cause permanent damage to the device. These are stress ratings only, and do not refer to the functional operation of the device. Table 4: Absolute Maximum Ratings Symbol Parameter Min Max Unit L VDD33 Power supply voltage –0.3 3.6 V Tstore Storage temperature –40 150 °C IA 5.2 Recommended Operating Conditions T Table 5: Recommended Operating Conditions Symbol Parameter EN Min Typical Max Unit VDD33 Power supply voltage 2.7 3.3 3.6 V IV DD Current delivered by external power supply 0.5 - - A T Operating temperature –40 - 85 °C 5.3 DC Characteristics (3.3 V, 25 °C) ID Table 6: DC Characteristics Symbol Parameter Min Typ Max Unit CIN Pin capacitance - 2 - pF NF VIH High-level input voltage 0.75 × VDD1 - VDD + 0.3 V VIL Low-level input voltage –0.3 - 0.25 × VDD V IIH High-level input current - - 50 nA IIL Low-level input current - - 50 nA VOH High-level output voltage 0.8 × VDD - - V CO VOL Low-level output voltage - - 0.1 × VDD V High-level source current (VDD = 3.3 V, VOH >= IOH - 40 - mA 2.64 V, PAD_DRIVER = 3) Low-level sink current (VDD = 3.3 V, VOL = IOL - 28 - mA 0.495 V, PAD_DRIVER = 3) RP U Pull-up resistor - 45 - kΩ RP D Pull-down resistor - 45 - kΩ Low-level input voltage of EN to reset the mod- VIL_nRST - - 0.6 V ule 1. VDD is the I/O voltage for a particular power domain of pins. More details can be found in Appendix IO_MUX of ESP32 Datasheet. Espressif Systems 9 ESP32-WROOM-32SE Datasheet V0.1

5. Electrical Characteristics 5.4 Wi-Fi Radio Table 7: Wi-Fi Radio Characteristics Parameter Condition Min Typical Max Unit Input frequency - 2412 - 2462 MHz Output impedance* - - * - Ω TX power 11n, MCS7 21.78 22.23 22.49 dBm 11b mode 25.14 25.64 25.72 dBm Sensitivity 11b, 1 Mbps - –98 - dBm AL 11b, 11 Mbps - –89 - dBm 11g, 6 Mbps - –92 - dBm 11g, 54 Mbps - –74 - dBm 11n, HT20, MCS0 - –91 - dBm 11n, HT20, MCS7 - –71 - dBm TI 11n, HT40, MCS0 - –89 - dBm 11n, HT40, MCS7 - –69 - dBm Adjacent channel rejection 11g, 6 Mbps - 31 - dB 11g, 54 Mbps - 14 - dB 11n, HT20, MCS0 11n, HT20, MCS7 EN - - 31 13 - - dB dB ∗ For the modules that use IPEX antennas, the output impedance is 50 Ω. For other modules without IPEX antennas, users do not need to concern about the output impedance. ID 5.5 BLE Radio 5.5.1 Receiver NF Table 8: Receiver Characteristics – BLE Parameter Conditions Min Typ Max Unit Sensitivity @30.8% PER - - –97 - dBm Maximum received signal @30.8% PER - 0 - - dBm CO Co-channel C/I - - +10 - dB F = F0 + 1 MHz - –5 - dB F = F0 – 1 MHz - –5 - dB F = F0 + 2 MHz - –25 - dB Adjacent channel selectivity C/I F = F0 – 2 MHz - –35 - dB F = F0 + 3 MHz - –25 - dB F = F0 – 3 MHz - –45 - dB 30 MHz ~ 2000 MHz –10 - - dBm 2000 MHz ~ 2400 MHz –27 - - dBm Out-of-band blocking performance 2500 MHz ~ 3000 MHz –27 - - dBm 3000 MHz ~ 12.5 GHz –10 - - dBm Intermodulation - –36 - - dBm Espressif Systems 10 ESP32-WROOM-32SE Datasheet V0.1

5. Electrical Characteristics 5.5.2 Transmitter Table 9: Transmitter Characteristics – BLE Parameter Conditions Min Typ Max Unit RF transmit power - - 0 - dBm Gain control step - - 3 - dBm RF power control range - –1.14 - -0.23 dBm F = F0 ± 2 MHz - –52 - dBm Adjacent channel transmit power F = F0 ± 3 MHz - –58 - dBm AL F = F0 ± > 3 MHz - –60 - dBm ∆ f 1avg - - - 265 kHz ∆ f 2max - 247 - - kHz ∆ f 2avg /∆ f 1avg - - –0.92 - - ICFT - - –10 - kHz TI Drift rate - - 0.7 - kHz/50 µs Drift - - 2 - kHz EN ID NF CO Espressif Systems 11 ESP32-WROOM-32SE Datasheet V0.1

5. Electrical Characteristics 5.6 Reflow Profile Temperature (℃) Peak Temp. 235 ~ 250℃ 250 Preheating zone Reflow zone Cooling zone AL 150 ~ 200℃ 60 ~ 120s !217℃ 60 ~ 90s -1 ~ -5℃/s 217 200 Soldering time > 30s Ramp-up zone 1 ~ 3℃/s TI 100 50 25 0 EN Time (sec.) 0 50 100 150 200 250 Ramp-up zone — Temp.: <150℃ Time: 60 ~ 90s Ramp-up rate: 1 ~ 3℃/s Preheating zone — Temp.: 150 ~ 200℃ Time: 60 ~ 120s Ramp-up rate: 0.3 ~ 0.8℃/s Reflow zone — Temp.: >217℃ 7LPH60 ~ 90s; Peak Temp.: 235 ~ 250℃ (<245℃ recommended) Time: 30 ~ 70s ID Cooling zone — Peak Temp. ~ 180℃ Ramp-down rate: -1 ~ -5℃/s Solder — Sn&Ag&Cu Lead-free solder (SAC305) Figure 2: Reflow Profile NF CO Espressif Systems 12 ESP32-WROOM-32SE Datasheet V0.1

Espressif Systems 6. Physical Dimensions 6. Physical Dimensions CO Module Width ESP32-WROOM-32SE DIMENSIONS Unit: mm NF 18.00±0.10 3.10±0.10 18.00±0.10 Module Thickness 6.20±0.10 Antenna Area 0.80±0.10 0.85±0.10 PCB Thickness 0.45±0.10 0.90±0.10 0.90±0.10 ID 3.60±0.10 13 25.50±0.10 25.50±0.10 17.60±0.10 16.51±0.10 3.60±0.10 Module Length 5.70±0.10 EN 8.50±0.10 ∅0.50±0.10 1.27±0.10 1.27±0.10 15.80±0.10 1.50±0.10 1.50±0.10 ESP32-WROOM-32SE Datasheet V0.1 1.27±0.10 3.28±0.10 3.28±0.10 11.43±0.10 11.43±0.10 Top View Side View TI Bottom View AL Figure 3: Physical Dimensions of ESP32-WROOM-32SE

7. Recommended PCB Land Pattern 7. Recommended PCB Land Pattern Unit:mm 18 0.9 6.3 AL 7.49 2 1 38 4 5 25.5 1.27x13=16.51 5 TI 6.51 1 15 24 2.785 EN 1.27x9=11.43 17 2.785 Figure 4: Recommended PCB Land Pattern of ESP32-WROOM-32SE ID NF CO Espressif Systems 14 ESP32-WROOM-32SE Datasheet V0.1

8. Learning Resources 8 Learning Resources 8.1 Must-Read Documents The following link provides documents related to ESP32. • ESP32 Datasheet This document provides an introduction to the specifications of the ESP32 hardware, including overview, pin definitions, functional description, peripheral interface, electrical characteristics, etc. • ESP-IDF Programming Guide AL It hosts extensive documentation for ESP-IDF ranging from hardware guides to API reference. • ESP32 Technical Reference Manual The manual provides detailed information on how to use the ESP32 memory and peripherals. • ESP32 Hardware Resources TI The zip files include the schematics, PCB layout, Gerber and BOM list of ESP32 modules and development boards. • ESP32 Hardware Design Guidelines EN The guidelines outline recommended design practices when developing standalone or add-on systems based on the ESP32 series of products, including the ESP32 chip, the ESP32 modules and development boards. • ESP32 AT Instruction Set and Examples This document introduces the ESP32 AT commands, explains how to use them, and provides examples of several common AT commands. ID • Espressif Products Ordering Information 8.2 Must-Have Resources Here NF are the ESP32-related must-have resources. • ESP32 BBS This is an Engineer-to-Engineer (E2E) Community for ESP32 where you can post questions, share knowledge, explore ideas, and help solve problems with fellow engineers. CO • ESP32 GitHub ESP32 development projects are freely distributed under Espressif’s MIT license on GitHub. It is established to help developers get started with ESP32 and foster innovation and the growth of general knowledge about the hardware and software surrounding ESP32 devices. • ESP32 Tools This is a webpage where users can download ESP32 Flash Download Tools and the zip file ”ESP32 Certification and Test”. • ESP-IDF This webpage links users to the official IoT development framework for ESP32. • ESP32 Resources This webpage provides the links to all available ESP32 documents, SDK and tools. ����������� Espressif Systems 15 ESP32-WROOM-32SE Datasheet V0.1

Revision History Revision History Date Version Release notes 2018.09 V0.1 Preliminary release. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) AL This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an TI uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. FCC Label Instructions EN The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as: “Contains Transmitter Module FCC ID:2AC7Z-WROOM32SE" or “Contains FCC ID:2AC7Z-WROOM32SE” Any similar wording that expresses the same meaning may be used. ID NF CO Espressif Systems 16 ESP32-WROOM-32SE Datasheet V0.1


Document Created: 2019-03-25 11:25:26
Document Modified: 2019-03-25 11:25:26
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC