Modular Approval Request Letter

FCC ID: 2AC7Z-ESPWROOM02

Cover Letter(s)

Download: PDF
FCCID_2588047

Modular Approval Request Letter FCC ID: 2AC7Z- ESPWROOM02 Data: April 15, 2015 Gentlemen: There’s an Wi-Fi Internet of Things Module that would like to have your authorization as a modular approval. The specific product as below, Wi-Fi Internet of Things Module, with its designed features and specified description, meets special requirements for full modular approval on FCC Public Notice 15.212 Released: June 26, 2000 by cross-reference list below. Company :ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD Model Name : Wi-Fi Internet of Things Module Model Number : ESP-WROOM-02 FCC ID : 2AC7Z- ESPWROOM02 Requirement of Public Notice 15.212 Reference to ESP‐WROOM‐02. 1. The modular transmitter must have its own RF shielding. The module has its own RF shielding. Please see external photo.pdf 2. The modular transmitter must have buffered modulation/data inputs. The modular has buffered data inputs, it is integrated in chip ESP‐WROOM‐02. Please see schematic.pdf 3. The modular transmitter must have its own power supply regulation. All power lines derived from the host device are regulated before energizing other circuits internal to the ESP‐WROOM‐02. Please see schematic.pdf 4. The modular transmitter must comply with the antenna requirements of The ESP‐WROOM‐02 meets the FCC antenna requirements. Please Section 15.203 and 15.204(c). see external photo.pdf 5. The modular transmitter must be tested in a stand‐alone configuration, The ESP‐WROOM‐02 was tested in a stand‐alone configuration via i.e., the module must not be inside another device during testing. com serial interface. Please see test set‐up photo.pdf 6. The modular transmitter must be labeled with its own FCC ID number, The label position of ESP‐WROOM‐02 is clearly indicated. If the FCC and, if the FCC ID is not visible when the module is installed inside another ID of the module cannot be seen when it is installed, then the host device, then the outside of the device into which the module is installed label must include the text: Contains FCC ID: 2AC7Z‐ ESPWROOM02. must also display a label referring to the enclosed module. Please see the label.pdf 7. The modular transmitter must comply with any specific rule or operating The ESP‐WROOM‐02 is compliant with all applicable FCC rules. requirements applicable to the transmitter and the manufacturer must Detail instructions are given in the Users Manual. Please see user provide adequate instructions along with the module to explain any such manual.pdf requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any applicable RF exposure The ESP‐WROOM‐02 is approved to comply with the applicable RF requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and exposure requirement, please see the MPE evaluation with 20cm as specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and the distance restriction. 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Thank you. Sincerely, Minjie Cai / Marketing Manager ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD Tel: 86-021- 61062057 caiminjie@espressif.com


Document Created: 2015-04-15 14:05:29
Document Modified: 2015-04-15 14:05:29
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC