RF Exposure

FCC ID: 2AC7Z-ESPEYE

RF Exposure Info

Download: PDF
FCCID_4210344

Bay Area Compliance Laboratories Corp. (Kunshan)                             Report No.: RSHD181229001-00B

FCC §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE)
Applicable Standard
According to subpart 15.247 (i) and subpart 1.1310, 2.1091 systems operating under the provisions of this
section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of
the communication guidelines.

                               Limits for General Population/Uncontrolled Exposure
  Frequency Range             Electric Field       Magnetic Field         Power Density       Averaging Time
       (MHz)                 Strength (V/m)        Strength (A/m)           (mW/cm2)            (minutes)
      0.3-1.34                    614                   1.63                  *(100)                  30
       1.34-30                    824/f                 2.19/f              *(180/f²)                 30
        30-300                    27.5                  0.073                  0.2                    30
       300-1500                     /                                        f/1500                   30
     1500-100,000                   /                                          1.0                    30

f = frequency in MHz; * = Plane-wave equivalent power density


Calculated Formulary:
Predication of MPE limit at a given distance

S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
    factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);


Calculated Data:

                 Frequency        Maximum               Tune-up            Evaluation       Power
                                 Antenna Gain        Conducted Power                                  MPE Limit
   Mode            Range                                                    Distance       Density
                                                                                                      (mW/cm2)
                   (MHz)       (dBi)   (numeric)     (dBm)    (mW)            (cm)        (mW/cm2)
                 2412-2462      2.98       1.99       26.00      398.11        20          0.1576          1.00
   Wi-Fi
                 2422-2452      2.98       1.99       24.00      251.19        20          0.0994          1.00
   BLE           2402-2480      2.98       1.99       2.50        1.78         20          0.0007          1.00
 Bluetooth       2402-2480      2.98       1.99       6.00        3.98         20          0.0016          1.00

Note: Wi-Fi and BT/BLE cannot transmit simultaneously

Conclusion: The EUT meets exemption requirement- RF exposure evaluation greater than 20cm distance
specified in § 2.1091. If the device built into a host as a portable usage, the additional RF exposure
evaluation may be required as specified by§ 2.1093.




FCC Part 15.247                                                                                     Page 15 of 86



Document Created: 2019-03-24 18:04:22
Document Modified: 2019-03-24 18:04:22

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC