Test Report

FCC ID: 2AC3T-B36T10RA

Test Report

Download: PDF
FCCID_2398344

849 NW State Road 45 Newberry, FL 32669 USA Ph: 888.472.2424 or 352.472.5500 Fax: 352.472.2030 Email: info@timcoengr.com Website: www.timcoengr.com FCC PART 15.249 & IC RSS-210 (i8) ANNEX A2.9 UNLICENSED INTENTIONAL RADIATOR COMBINED TEST REPORT Applicant BUILDING 36 TECHNOLOGIES, LLC 35 HIGHLAND CIRCLE Address SUITE 300 NEEDHAM MA 02494 USA FCC ID 2AC3T-B36T10RA IC Certification 12323A-B36T10RA Number Model Number B36-T10 Product Description THERMOSTAT FCC Standard Applied 47 CFR §15.249 Industry Canada RSS-210 Issue 8 Annex A2.9 Standard Applied Date Sample Received 9/11/2014 Date Tested 9/18/14 Tested By Sid Sanders Approved By Cory Leverett Report Number 1611AUT14TestReport.docx Test Results PASS FAIL THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC.

Table of Contents GENERAL REMARKS L. ....0.0.000 00e ce ce ce ce cce n m n n n n n n nc cce n mm n n n e n nc cn www en ce 3 GENERAL INFORMATION: .2 .2.0.00 00e ce ce ce n en n n e e e enc enc cce ww www en n nc cce ce ww n ww e en 4 TEST RESULTS SUMMARY . TEST PROCEDURES .. RADIATION INTERFERENCE. 99% POWER OCCUPIED BANDWIDTH LOWER BANDEDGE .. UPPER BANDEDGE DUTY CYOLE: POWER LINE CONDUCTED INTERFERENCE EMC EQUIPMENT LIST APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 2 of 14

GENERAL REMARKS The attached report shall not be reproduced except in full without the written permission of Timco Engineering Inc. Summ ary The device under test does: K fulfill the general approval requirements as identified in this test report C not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with 1SO 17025: 2005 requirements. | attest that the necessary measurements were made, under my supervision, at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FI 32669 Authorized Signatory Name: Sid Sanders Project Manager Date: 9/ 20/ 14 Contents APPLILCANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T10RA 1C: 12323A—B36T10RA REPORT: V:\B\BUILDING 3611611 AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 3 of 14

GENERAL INFORMATI ON EUT Specification The test results relate only to the items tested. Applicable Standards FCC Part 15.249 & 1C RSS—210 (i8), RSS—GEN (i3) EUT Description WIRELESS THERMOSTAT FCCID 2AC3T—B36T1ORA 1C Certification Number 12323A—B36T1 ORA Model Number B36—T10 Operating Frequency TX: 908.4 & 916 MHz RX: Same No. of Channels 2 Modulations C] 110—120vac/50— 60Hz when Charging EUT Power Source |:| DC Power K Battery Operated Exclusively C] Prototype C Pre— E] Production Test Item Production Type of Equipment [X] Fixed C Mobite CJ Portable FCC Rules require that the antenna connector be unique. Antenna Connector There is no antenna connector, it has an integrated PCB antenna Timco Engineering Inc. located at 849 NW State Road 45 Test Facility Newberry, FL 32669 USA. Conditions in the Test Temperature: 26°C laboratory Relative humidity: 50% Placed into continuous transmit mode with 100% duty Test Exercise cycle Revision History of EUT None TEST RESULTS SUMMARY FCC Rules Part No. Industry Canada Rules RESULTS — Pass/ Fail/ NA 15.249 Fundamental Emission RSS—210 (i8) ANNEX Pass A2.9, RSS—GEN (i3) 15.249 & 15.209 Harmonics & RSS—210 (i8) ANNEX Pass Spurious A2.9, RSS—GEN (i3) 15.205 & 2.202 Occupied RSS—GEN (i3), 4.6 Pass Bandwidth 15.249 & 15.205 Bandedge RSS—GEN (i3), 4.6 Pass Compliance 15.207 Power Line Emissions RSS—GEN (13), 7.2.4 N/A Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 4 of 14

TEST PROCEDURES Radiation Interference: ANSI ©63.4—2003 using a spectrum analyzer, a preselector, a quasi—peak adapter, and an appropriate antenna. The analyzer was calibrated in dB above a microvolt at the output of the antenna. The resolution bandwidth was 100 kHz with an appropriate sweep speed and the video bandwidth was 300 kHz up to 1 GHz and 1 MHz with a video BW of 3 MHz above 1 GHz. When an emission was found, the table was rotated to produce the maximum signal strength. The antenna was placed in both the horizontal and vertical planes and the worst case emissions were reported. The spectrum was searched to at least the tenth (10) harmonic of the fundamental. Emissions were scanned from 30MHz to the tenth harmonic of the fundamental frequency at three places in the band. All emissions greater than 20 dB from the limit are not reported. Formula Of Conversion Factors: The field strength at 3m was established by adding the meter reading of the spectrum analyzer (which is set to read in units of dBuV) to the antenna correction factor supplied by the antenna manutacturer. The antenna correction factors are stated in terms of dB. The gain of the preselector was accounted for in the spectrum analyzer meter reading. Example: Freq (MHz) Meter Reading + ACF L = FS 33 20 dBuV + 10.36 dB + 0.5 = 30.86 dBuV/m @ 3m Power Line Conducted Interference: The procedure used was ANSI C63.4—2003 using a 50uH LISN. Both lines were observed. The bandwidth of the spectrum analyzer was 10kHz with an appropriate sweep speed. The spectrum was scanned from 0.15 to 30 MHz. Occupied Bandwidth: A small sample of the transmitter output was fed into the spectrum analyzer and the attached plot was printed. The vertical scale is set to —10 dBm per division. ANSI C63.4—2003 10.1 Measurement Procedures: The EUT was placed on a table 80 cm high and with dimensions of 1m by 1.5m. The EUT was placed in the center of the table (1.5m side). The table used for radiated measurements is capable of continuous rotation.. When an emission was found, the table was rotated to produce the maximum signal strength. At this point, the antenna was raised and lowered from 1m to 4m. The antenna was placed in both the horizontal and vertical planes. Emissions attenuated more than 20 dB below the permissible value are not reported. Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 5 of 14

RADIATION I NTERFERENCE Rules Part No.: FCC 15.249, 15.209 & IC RSS—210 (i8) ANNEX A2.9, RSS—GEN (i3) Requirements: Frequency | Limits Part 15.209 & RSS—GEN (i3) 9 to 490 kHz 2400/F (kHz) uV/m @300 meters 490 to 1705 kHz 24000/F (kHz) uV/m @ 30 meters 1705 kHz to 30 MHz 29.54 dBuV/m @ 30 meters 30 — 88 40.0 dBuV/m @3 meters 80 — 216 43.5 dBuV/m @3 meters 216 — 960 46.0 dBuV/m @3 meters Above 960 54.0 dBuV/m @3 meters Part 15.249 & RSS—210 (i8) ANNEX A.2.9 Fundamental 902 — 928 MHz 94.0 dBuV/m @3 meters Fundamental 2.4 — 2.4835 GHz 94.0 dBuV/m @3 meters Harm onics 54.0 dBuV/m @3 meters Test Data: Peak Detector Used for all Measurement‘s. Tuned Emission Meter Ant. Coax Correction Field Margin Freq. Freq. Reading Polarity Loss Factor Strength dB MHz MHz dBuV dB dB/m dBuV/m 908.9 908.90 52.7 H 2.89 23.30 78.39 15.61 908.9 908.90 60.3 v 2.89 23.30 85.99 8.01 908.9 1,817.90 2.9 H 2.96 30.62 36.48 17.52 908.9 1,817.90 5.2 v 2.96 30.62 38.78 15,22 908.9 2,725.50 5.8 H 341 33.06 41.77 12.28 908.9 2,725.50 10.2 v 341 33.06 46.67 7.38 908.9 3,633,20 6.1 H 4.17 33.39 43.66 10.34 908.9 3,633,.20 9.7 v 4.17 33.39 47.26 6.74 908.9 4,542.10 8.7 v 4.77 34.10 47.57 6.43 908.9 4,546.10 0.1 H 4.77 34.10 38.97 15.08 908.9 5,453,.50 1.2 H 5.14 34.64 40.97 13.08 908.9 5,453,.60 1.0 v 5.14 34.64 40.78 18,22 908.9 5,962,60 4.4 H 5.29 35.44 45.13 8.87 908.9 6,262,40 11.1 v 5.398 35.71 52.19 1L.81 908.9 6,326,.60 1.2 H 5.40 35.76 42.35 11.65 908.9 6,871.50 0.5 H 5.56 35.90 41.96 12.04 908.9 7,271.50 L1 H 5.76 35.79 42.60 11.40 908.9 7,780.50 5.1 H 6.07 35.81 46.98 7.02 908.9 8,180,50 L1 H 6.27 35.94 43.26 10.74 908.9 8,180,50 T.5 v 6.27 35.94 49.71 4.29 908.9 8,690.70 1.5 H 6.48 36.04 44.02 9.98 908.9 9,089.40 0.5 v 6.63 36.19 49.32 10.68 908.9 9,089.40 0.8 H 6.63 36.19 493.62 10.38 APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 6 of 14

RADIATI ON | NTERFERENCE Tuned Emission Meter Ant. Coax Correction Field Margin Freq. Freq. Reading Polarity Loss Factor Strength dB MHz MHz dBuV dB dB/m dBuV/m 916.0 916.00 45.4 H 240 23.36 7116 22.84 916.0 916.00 53.6 v 240 23.36 79.36 14.64 916.0 1,832,00 4.3 v 2.99 30.69 37.98 16.02 916.0 1,832,00 5.6 H 2.99 30.69 39.28 14.72 916.0 2,748.00 10.3 v 3.42 33.10 46.82 7.18 916.0 2,748.00 14.2 H 3.42 33.10 50.68 3.32 916.0 3,664.00 9.3 v 4.20 33.48 46.93 7.07 916.0 3,664.00 15.1 H 4.20 33.48 52.76 1.24 916.0 3,664.00 15.1 H 4.20 33.48 52.76 1.24 916.0 4,580.00 4.1 v 4.79 34.10 42.99 11.01 916.0 4,580.00 10.2 H 4.79 34.10 49.09 4.91 916.0 5,496.00 L1 v 5.15 34.70 40.95 18.05 916.0 5,496.00 1.6 H 5.15 34.70 41.45 12,55 916.0 6,412,00 5.8 H 5.42 35.83 46.55 7.45 916.0 6,412,00 6.4 v 5.42 35.83 47.65 6.35 916.0 7,328.00 2.7 v 5.80 35.77 44.27 9.73 916.0 7,328.00 4.0 H 5.80 35.77 45.57 8.483 916.0 8,244.00 3.2 H 6.30 35.95 45.45 8.55 916.0 8,244.00 4.3 v 6.30 35.95 46.55 7.A5 916.0 9,160.00 0.6 H 6.65 36.26 498.51 10.49 916.0 9,160,00 0.6 v 6.65 36.26 498.51 10,.49 Results: EUT meets the FCC & Industry Canada Requirements. Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 7 of 14

99% POWER OCCUPIED BANDWIDTH Rules Part No.: 15.249 (d) Requirements: The field strength of any emissions appearing outside the bandedges and up to 10 kHz above and below the band edges shall be attenuated at least 50 dB below the level of the carrier or to the general limits of 15.249. Test Data: CH 1 99% OBW = 93.05 KHz sos ow ds Temp|1 ads . temp |2 Center 908.4192308 iz Span 365.1825 kiz Date: 17.9E9.2014— 16146153 Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 8 of 14

99% POWER OCCUPIED BANDWIDTH Rules Part No.: RSS—GEN (i3), 4.6 Requirements: . Emissions radiated outside of the specified frequency bands, except for the harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the highest general field strength limits listed in RSS—GEN, whicheveris less stringent. Test Data: CH 2 99% OBW = 115.44 KHz Center o16 itz s6—2007 kite/ Span 262.007 Jate Results: EUT meets the FCC & Industry Canada Requirements. Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 9 of 14

LOW ER BANDEDGE & _ rec 62 asuv *ace 10 as *rew 100 ki 300 Jate SWt 5 me H & stare. so1.5 i2 12180 i/ stop s13.38 im RESULTS: MEETS FCC REQUIREMENTS APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 10 of 14

UPPER BANDEDGE Rres 62 aBuy *ace 10 as 10 ms »a #s ane stare 910.06 mtc 1804 mme/ stop 928.5 iz Date: 22.9E9.2014 15102142 RESULTS: MEETS FCC REQUIREMENTS APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 11 of 14

DUTY CYCLE: NOT APPLICABLE Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 12 of 14

POW ER LINE CONDUCTED I NTERFERENCE Rules Part No.: 15.207, & RSS—GEN (i3), 7.2.4 Requirements: Frequency Quasi Peak Limits Average Limits (MHz) (dBuv) (dBuV) 0.15 — 0.5 66 — 56 56 — 46 0.5 — 5.0 56 46 5.0 — 30 60 50 Test Data: NOT APPLICABLE EUT is Battery powered. Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. 2AC3T—B36T1ORA 12323A—B36T1 0RA V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 13 of 14

EMC EQUIPMENT LIST Device Manufacturer Model Serial Cal/ Char Due Date Number Date Antenna: Eaton 94455—1 1057 06/ 14/ 13 06/ 14/ 15 Biconnical Chamber Antenna: Eaton 96005 1243 05/ 31/13 05/31/15 Log— Periodic 3—Meter Panashield N/ A N/ A 12/ 31713 12/31/15 Sem i— Anechoic Chamber Antenna: ETS—Lindgren 3117 00035923 O6/13/14 06/13/16 Double— Chamber Ridg ed Horn/ ETS Horn 1 EMI Test Rohde & ESIB 40 100274 08/12/14 08/12/16 Receiver R Schw arz & S ESIB 40 EMI Test Rohde & ESU 40 100320 03/11/14 03/11/16 Receiver R Schw arz & S ESU 40 * EMI RECEIVER SOFTWARE VERSION The receiver firmware used was version 4.43 Service Pack 3 Table of Contents APPLICANT: BUILDING 36 TECHNOLOGIES LLC. FCC ID: 2AC3T—B36T1ORA 1C: 12323A—B36T1 0RA REPORT: V:\B\BUILDING 361161 1AUT14\161 1 AUT14TESTREPORTREV1.DOCX Page 14 of 14


Document Created: 2019-06-07 04:45:52
Document Modified: 2019-06-07 04:45:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC