User Manual 1

FCC ID: 2AC23-WT39M2011T

Users Manual

Download: PDF

FCCID_3230327

PRODUCTS USERMANUAL
WT39M2011T
WIFI Module
IEEE 802.11b/g/n/a 2T/2R
Model Number: WT39M2011T

Product Description
GSD WT39M2011T is a high-gain and low power consumption wifi module . It fully complies
with IEEE 802.11n and IEEE 802.11b/g/a feature rich wireless connectivity at high
standards,delivers reliable,cost-effective,throughput from an extended distance.When
5V, USB bus and GND were connected,This module is working. The Bluetooth part supports latest
4.0+HS operation.

Product Specification
Product Features

Model WT39M2011T
◆ Complies with IEEE 802.11g;
Product Name WIFI+BT Module
802.11b; 802.11n ; 802.11a standard
for 2.4GHz and5GHz Wireless LAN. Standard 802.11b/g/n /a
◆TWO Transmit and TWO Receive Interface 12pin Interface
path(2T2R)
◆Supports Ad-Hoc/Infrastructure modes Data Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60
,90,120 and maximum of 300Mbps
◆ Works with all existing network
Modulation Method QPSK , BPSK , CCK(802.11b)
nfrastructure. QPSK , BPSK , 16QAM ,64QAM with
◆Capable of up to 128-Bit WEP OFDM (802.11g)
Encryption. BPSK , QPSK , 16QAM ,64QAM with
◆Freedom to roam while staying OFDM(802.11n)
QPSK , BPSK , 16QAM ,64QAM with
connected. OFDM (802.11a)
◆ UP to 300 Mbps High-Speed Transfer
Rate in 802.11n mode of operation. Frequency Band 2.4GHz: CH 1~CH11 for FCC
◆ Operating Systems：Windows XP 5GHz: 5150~5250MHz,
5725~5850MHz
32/64,2000,Windows 7,Vista
Transmit Power < 18dBm
32/64,Linux,Macintosh
◆ Low power consumption. Operation Mode Infrastructure
◆ Easy to install and configure. Operation Range Up to 300 meters in open space
◆Bluetooth v4.1 Low Energy(LE); OS Support Windows XP 32/64,2000,Windows 7,Vista
◆Bluetooth specification v2.1+EDR; 32/64,Linux,Macintosh
Security WEP, TKIP, AES, WPA, WPA2

Operating Voltage 5V±10%

Operating -10 ~ 70°C ambient temperature
Temperature
Storage -55 ~ 125°C ambient temperature
Temperature
Humidity 5 to 90 % maximum (non-condensing)

PAGE 1 OF 3 Version 1.0

PRODUCTS USERMANUAL
WT39M2011T

FCC Important Notes:
(1)
FCC Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user
documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in
any portable device.

Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter
except in accordance with FCC multi-transmitter product procedures.

(2)
Co-location Warning:
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

(3)
OEM integration instructions:
This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with
the integral antenna(s) that has been originally tested and certified with this module.

As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still
responsible for testing their end-product for any additional compliance requirements required with this module installed
(for example, digital device emissions, PC peripheral requirements, etc.).

(4)
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another
transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered
valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

(5)
End product labeling:
The final end product must be labeled in a visible area with the following:
“Contains Transmitter Module FCC ID: 2AC23- WT39M2011T”.

(6)
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF
module in the user's manual of the end product which integrates this module. The end user manual shall include all required
regulatory information/warning as show in this manual.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the

PAGE 2 OF 3 Version 1.0

Document Created: 2016-12-06 20:50:01
Document Modified: 2016-12-06 20:50:01

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC