18_WL6ER1510 RFExp

FCC ID: 2AC23-WL6E

RF Exposure Info

Download: PDF
FCCID_4292315

FCC RF EXPOSURE REPORT FCC ID: 2AC23-WL6E Project No. : 1904C050 Equipment : WIFI Module Model : WL6ER1510 Applicant : Hui Zhou Gaoshengda Technology Co.,LTD Address : NO.75 Zhongkai Development Area, Huizhou, Guangdong According : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-2-1904C050 Page 1 of 3 Report Version: R00

1. GENERAL SUMMARY Equipment : WIFI Module Brand Name : GSD Test Model : WL6ER1510 Series Model : N/A Applicant : Hui Zhou Gaoshengda Technology Co.,LTD Manufacturer : Hui Zhou Gaoshengda Technology Co.,LTD Address : NO.75 Zhongkai Development Area, Huizhou, Guangdong Factory : Hui Zhou Gaoshengda Technology Co.,LTD Address : NO.75 Zhongkai Development Area, Huizhou, Guangdong Date of Test : Apr. 12, 2019 ~ May 08, 2019 Test Sample : Engineering Sample No.: D190403745 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-2-1904C050) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-2-1904C050 Page 2 of 3 Report Version: R00

2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 2.50 3. TEST RESULTS Antenna Directional Max. Output Max. Output Power Limit of Power Test gain gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 2.50 1.7783 16.02 39.9945 0.01416 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance. End of Test Report Report No.: BTL-FCCP-2-1904C050 Page 3 of 3 Report Version: R00


Document Created: 2019-05-25 02:53:38
Document Modified: 2019-05-25 02:53:38
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC