2AC23-WCT6LA2701_MPE REPORT_Rev2

FCC ID: 2AC23-WCT6LA2701

RF Exposure Info

Download: PDF
FCCID_3483541

Ufll%nTrUSi Page 1 of 16 Report No.: 170615002RFC—5 RF EXPOSURE EVALUATION REPORT Product Name: WIFI+BT Module Trade Mark: GSD Model No.: WCT6LA2701 Report Number: 170615002RFC—5 . FCC 47 CFR Part 1 Subpart | Test Standards: mss jos lssue 6 FCC ID: 2AC23—WCT6LA2701 IC: 12290A—WCT6LA2701 Test Result: PASS Date of Issue: July 11, 2017 Prepared for: Hui Zhou Gaoshengda Technology Co.,LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China TEL: +86—755—2823 0888 FAX: +86—755—2823 0886 Tested by: p :»/ S _ _ Reviewed by: ttevin Liang Senior Engineer Senior Supervisor | Approved by: Date: July 11, 2017 Billy Li Technical Director Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua NewDistrict, Shenzhen, China Tel: +86—755—28230888 Fax: +86—755—28230886 E—mail: info@uttlab.com Hitp:/nwwuttlab.com

Page 2 of 16 Report No.: 170615002RFC-5 Version Version No. Date Description V1.0 July 11, 2017 Original ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 3 of 16 Report No.: 170615002RFC-5 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 7 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 8 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 8 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 8 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 8 2. EQUIPMENT LIST .................................................................................................................................................... 8 3. MPE EVALUATION ................................................................................................................................................... 9 3.1 REFERENCE DOCUMENTS FOR EVALUATION ........................................................................................................ 9 3.2 MPE COMPLIANCE REQUIREMENT ..................................................................................................................... 9 3.2.1 LIMITS ................................................................................................................................................... 9 3.2.2 TEST PROCEDURE ............................................................................................................................... 10 3.3 MPE CALCULATION METHOD ........................................................................................................................... 11 3.3.1 FCC 47 CFR PART 1 SUBPART I .......................................................................................................... 11 3.3.2 RSS-102 ISSUE 5................................................................................................................................ 11 3.4 MPE CALCULATION RESULTS .......................................................................................................................... 11 3.4.1 FOR WLAN ......................................................................................................................................... 11 3.4.2 FOR BT ............................................................................................................................................... 14 3.4.3 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS .................................................................. 15 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP ........................................................................................................ 16 APPENDIX 2 PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS .................................................................... 16 ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 4 of 16 Report No.: 170615002RFC-5 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: Hui Zhou Gaoshengda Technology Co.,LTD Address of Applicant: NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Manufacturer: Hui Zhou Gaoshengda Technology Co.,LTD Address of Manufacturer: NO.75 Zhongkai Development Area, Huizhou, Guangdong, China 1.2 EUT INFORMATION Product Name: WIFI+BT Module Model No.: WCT6LA2701 Add. Model No.: N/A Trade Mark: GSD DUT Stage: Identical Prototype IEEE 802.11b/g/n 2.4 GHz ISM Band: Bluetooth: V3.0+EDR & V4.1 LE EUT Supports Function: 5 150 MHz to 5 250 MHz IEEE 802.11a/n/ac 5 GHz U-NII Bands: 5 725 MHz to 5 850 MHz IEEE 802.11a/n/ac 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD For BT_LE Frequency Range: 2400 MHz to 2483.5 MHz Bluetooth Version: Bluetooth V4.1 LE Type of Modulation: GFSK Number of Channels: 40 Channel Separation: 2 MHz Antenna Type: PIFA Antenna Antenna Gain: 1.72 dBi Maximum Peak Power: 0.5 dBm For BT_EDR Frequency Range: 2400 MHz to 2483.5 MHz Bluetooth Version: Bluetooth V3.0+EDR Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Type of Modulation: GFSK, π/4DQPSK, 8DPSK Number of Channels: 79 Channel Separation: 1 MHz Antenna Type: PIFA Antenna Antenna Gain: 1.72 dBi Maximum Peak Power: 8.07 dBm ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 5 of 16 Report No.: 170615002RFC-5 For 2.4 GHz ISM Band of Wi-Fi Frequency Range: 2400 MHz to 2483.5 MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20, IEEE 802.11n-HT40 IEEE 802.11b: DSSS(CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK) Type of Modulation: IEEE 802.11n-HT20: OFDM(64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT40: OFDM(64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11b: Up to 11 Mbps IEEE 802.11g: Up to 54 Mbps Data Rate: IEEE 802.11n-HT20: Up to MCS15 IEEE 802.11n-HT40: Up to MCS15 IEEE 802.11b: 11 IEEE 802.11g: 11 Number of Channels: IEEE 802.11n-HT20: 11 IEEE 802.11n-HT40: 7 Channel Separation: 5 MHz Chain 0 PIFA Antenna Antenna Type: Chain 1 PIFA Antenna Chain 0 1.72 dBi Antenna Gain: Chain 1 1.72 dBi Directional gain: 4.73 dBi IEEE 802.11b: 19.92 dBm IEEE 802.11g: 22.97 dBm SISO_ Chain 0 IEEE 802.11n-HT20: 18.52 dBm IEEE 802.11n-HT40: 18.59 dBm IEEE 802.11b: 20.49 dBm Maximum Peak Power: IEEE 802.11g: 22.82 dBm SISO_ Chain 1 IEEE 802.11n-HT20: 16.69 dBm IEEE 802.11n-HT40: 17.05 dBm IEEE 802.11n-HT20: 20.71 dBm MIMO_ Chain 0+1 IEEE 802.11n-HT40: 20.90 dBm For 5 GHz U-NII Bands of Wi-Fi 5150 MHz to 5250 MHz Frequency Range: 5 725 MHz to 5 850 MHz Support Standards: IEEE 802.11a/n/ac TPC Function: Not Support DFS Operational mode: Slave without radar Interference detection function IEEE 802.11a: OFDM(64QAM, 16QAM, QPSK, BPSK) Type of Modulation: IEEE 802.11n: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11ac: OFDM(256QAM, 64QAM, 16QAM, QPSK, BPSK) IEEE 802.11a/n-HT20/ac-VHT20: 20 MHz Channel Spacing: IEEE 802.11n-HT40/ac-VHT40: 40 MHz IEEE 802.11ac-VHT80: 80 MHz IEEE 802.11a: Up to 54 Mbps IEEE 802.11n-HT20: Up to MCS15 IEEE 802.11n-HT40: Up to MCS15 Data Rate: IEEE 802.11ac-VHT20: Up to MCS8 IEEE 802.11ac-VHT40: Up to MCS9 IEEE 802.11ac-VHT80: Up to MCS9 Number of Channels: 5150 MHz to 5250 MHz: ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 6 of 16 Report No.: 170615002RFC-5 4 for IEEE 802.11a/n-HT20/ac-VHT20 2 for IEEE 802.11n-HT40)/ac-VHT40 1 for IEEE 802.11acVHT80 5725 MHz to 5850 MHz: 5 for IEEE 802.11a/n-HT20/ac-VHT20 2 for IEEE 802.11n-HT40/ac-VHT40 1 for IEEE 802.11ac-VHT80 Chain 0 PIFA Antenna Antenna Type: Chain 1 PIFA Antenna 5150 MHz to 5250 MHz: 2.57 dBi Chain 0 5725 MHz to 5850 MHz: 2.57 dBi Antenna Gain: 5150 MHz to 5250 MHz: 2.57 dBi Chain 1 5725 MHz to 5850 MHz: 2.57 dBi 5150 MHz to 5250 MHz: 5.58 dBi Directional gain: 5725 MHz to 5850 MHz: 5.58 dBi SISO_Chain 0 U-NII-1 U-NII-3 IEEE 802.11a: 14.70 14.78 IEEE 802.11n-HT20: 11.20 11.37 IEEE 802.11n-HT40: 11.06 10.84 IEEE 802.11ac-VHT80: 9.82 8.95 SISO_Chain 1 U-NII-1 U-NII-3 Maximum Conducted IEEE 802.11a: 14.00 14.05 Output Power (dBm): IEEE 802.11n-HT20: 10.37 9.34 IEEE 802.11n-HT40: 10.12 9.01 IEEE 802.11ac-VHT80: 8.15 7.24 MIMO_Chain 0+1 U-NII-1 U-NII-3 IEEE 802.11n-HT20: 13.82 13.48 IEEE 802.11n-HT40: 13.63 13.03 IEEE 802.11ac-VHT80: 12.08 11.19 SISO_Chain 0 U-NII-1 U-NII-3 IEEE 802.11a: 17.27 17.35 IEEE 802.11n-HT20: 13.77 13.94 IEEE 802.11n-HT40: 13.63 13.41 IEEE 802.11ac-VHT80: 12.39 11.52 SISO_Chain 1 U-NII-1 U-NII-3 IEEE 802.11a: 16.57 16.62 Maximum EIRP (dBm): IEEE 802.11n-HT20: 12.94 11.91 IEEE 802.11n-HT40: 12.69 11.58 IEEE 802.11ac-VHT80: 10.72 9.81 MIMO_Chain 0+1 U-NII-1 U-NII-3 IEEE 802.11n-HT20: 19.40 19.06 IEEE 802.11n-HT40: 19.21 18.61 IEEE 802.11ac-VHT80: 17.66 16.77 ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 7 of 16 Report No.: 170615002RFC-5 1.4 OTHER INFORMATION Test channels for BT_LE Type of Modulation Tx/Rx Frequency Test RF Channel Lists Lowest(L) Middle(M) Highest(H) GFSK 2402 MHz to 2480 MHz Channel 0 Channel 19 Channel 39 2402 MHz 2440 MHz 2480 MHz Test channels for BT_EDR Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) GFSK Channel 0 Channel 39 Channel 78 2402 MHz to 2480 MHz (DH1, DH3, DH5) 2402 MHz 2441 MHz 2480 MHz π/4DQPSK Channel 0 Channel 39 Channel 78 2402 MHz to 2480 MHz (DH1, DH3, DH5) 2402 MHz 2441 MHz 2480 MHz 8DPSK Channel 0 Channel 39 Channel 78 2402 MHz to 2480 MHz (DH1, DH3, DH5) 2402 MHz 2441 MHz 2480 MHz Test channels for 2.4 GHz ISM Band of Wi-Fi Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) Channel 1 Channel 6 Channel 11 IEEE 802.11b 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 1 Channel 6 Channel 11 IEEE 802.11g 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 1 Channel 6 Channel 11 IEEE 802.11n-HT20 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 3 Channel 6 Channel 9 IEEE 802.11n-HT40 2422 MHz to 2452 MHz 2422 MHz 2437 MHz 2452 MHz Test channels for 5 GHz U-NII Bands of Wi-Fi Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) Channel 36 Channel 44 Channel 48 IEEE 802.11a 5150 MHz to 5250 MHz 5180 MHz 5220 MHz 5240 MHz IEEE 802.11n-HT20 IEEE 802.11ac-VHT20 Channel 149 Channel 157 Channel 161 5725 MHz to 5850 MHz 5745 MHz 5785 MHz 5805 MHz Channel 38 -- Channel 46 5150 MHz to 5250 MHz IEEE 802.11n-HT40 5190 MHz -- 5230 MHz IEEE 802.11ac-VHT40 Channel 151 -- Channel 159 5725 MHz to 5850 MHz 5755 MHz -- 5795 MHz -- Channel 42 -- 5150 MHz to 5250 MHz -- 5210 MHz -- IEEE 802.11ac-HT80 -- Channel 155 -- 5725 MHz to 5850 MHz -- 5775 MHz -- ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 8 of 16 Report No.: 170615002RFC-5 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product, according to the specifications of the manufacturers. It must comply with the requirements of the following standards: FCC 47 CFR Part 1 Subpart I RSS-102 Issue 5 All test items have been performed and recorded as per the above standards 1.6 DEVIATION FROM STANDARDS None. 1.7 ABNORMALITIES FROM STANDARD CONDITIONS None. 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER None. 2. EQUIPMENT LIST Please refer to the RF test report. ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 9 of 16 Report No.: 170615002RFC-5 3. MPE EVALUATION 3.1 REFERENCE DOCUMENTS FOR EVALUATION No. Identity Document Title PROCEDURES IMPLEMENTING THE NATIONAL 1 FCC 47 CFR Part 1 Subpart I ENVIRONMENTAL POLICY ACT OF 1969 Radio Frequency (RF) Exposure Compliance of 2 RSS-102 Issue 5 Radiocommunication Apparatus (All Frequency Bands) 3 KDB 447498 D01 General RF RF EXPOSURE PROCEDURES AND EQUIPMENT Exposure Guidance v06 AUTHORIZATION POLICIES FOR MOBILE AND PORTABLE DEVICES 3.2 MPE COMPLIANCE REQUIREMENT 3.2.1 Limits 3.2.1.1 FCC 47 CFR Part 1 Subpart I According to §1.1307(b)(1), system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Limits for Occupational / Controlled Exposure Electric Field Magnetic Field Averaging Times Frequency range Power Density (S) Strength (E) Strength (H) | E |2, | H |2 or S (MHz) (mW/cm2) (V/m) (A/m) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 / / F/300 6 1500-100000 / / 5 6 Limits for General Population / Uncontrolled Exposure Electric Field Magnetic Field Averaging Times Frequency range Power Density (S) Strength (E) Strength (H) | E |2, | H |2 or S (MHz) (mW/cm2) (V/m) (A/m) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-100000 / / 1 30 Note: f = frequency in MHz: * = Plane-wave equivalents power density. ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 10 of 16 Report No.: 170615002RFC-5 3.2.1.2 RSS-102 Issue 5 According to RSS-102 Issue 5, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. RF Field Strength Limits for Devices Used by the General Public (Uncontrolled Environment) Frequency range Electric Field (E) Magnetic Field (H) Power Density (S) Reference Period (MHz) (V/m rms) (A/m rms) (W/m2) H |2 or S (minutes) 21 0.003-10 83 90 - Instantaneous* 0.1-10 - 0.73/ ƒ - 6** 1.1-10 87/ ƒ0.5 - - 6** 10-20 27.46 0.0728 2 6 0.25 0.25 0.5 20-48 58.07/ ƒ 0.1540/ ƒ 8.944/ ƒ 6 48-300 22.06 0.05852 1.291 6 300-6000 3.142 ƒ0.3417 0.008335 ƒ0.3417 0.02619ƒ0.6834 6 6000-15000 61.4 0.163 10 6 15000-150000 61.4 0.163 10 616000/ ƒ1.2 150000-300000 0.158 ƒ0.5 4.21 x 10-4 ƒ0.5 6.67 x 10-5 ƒ 616000/ ƒ1.2 Note: ƒ is frequency in MHz. *Based on nerve stimulation (NS). ** Based on specific absorption rate (SAR). RF Field Strength Limits for Controlled Use Devices (Controlled Environment) Frequency range Electric Field (E) Magnetic Field (H) Power Density (S) Reference Period (MHz) (V/m rms) (A/m rms) (W/m2) H |2 or S (minutes) 0.003-1023 170 180 - Instantaneous* 1-10 - 1.6/ ƒ - 6** 1.29-10 193/ ƒ0.5 - - 6** 10-20 61.4 0.163 10 6 20-48 129.8/ ƒ0.25 0.3444/ ƒ0.25 44.72/ ƒ0.5 6 48-100 49.33 0.1309 6.455 6 0.25 0.25 100-6000 15.60 ƒ 0.04138 ƒ 0.6455ƒ0.5 6 6000-15000 137 0.364 50 6 15000-150000 137 0.364 50 616000/ ƒ1.2 150000-300000 0.354 ƒ0.5 9.40 x 10-4 ƒ0.5 3.33 x 10-4 ƒ 616000/ ƒ1.2 Note: ƒ is frequency in MHz. *Based on nerve stimulation (NS). ** Based on specific absorption rate (SAR). 3.2.2 Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 11 of 16 Report No.: 170615002RFC-5 3.3 MPE CALCULATION METHOD 3.3.1 FCC 47 CFR Part 1 Subpart I S = PG/4πR^2= EIRP/4πR^2 S = power density (in appropriate units, e.g., mw/cm2) P = power input to the antenna (in appropriate units, e.g., mw) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm) 3.3.2 RSS-102 Issue 5 S = PG/4πR^2= EIRP/4πR^2 S = power density (in appropriate units, e.g., w/m2) P = power input to the antenna (in appropriate units, e.g., w) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., m) 3.4 MPE CALCULATION RESULTS Note: For the test results, the EUT had been tested with all conditions. But only the worst case was shown in test report. 3.4.1 For WLAN For Wi-Fi function, operating at 2412MHz to 2462 MHz for IEEE802.11b/g/n and operating at 5150 MHz to 5250 MHz for IEEE802.11a/n/ac and operating at 5725 MHz to 5850 MHz for IEEE802.11a/n/ac. 3.4.1.1 Antenna Type: Chain 0: PIFA Antenna Chain 1: PIFA Antenna 3.4.1.2 Antenna Gain: Chain 0: 2412MHz to 2462 MHz: 1.72 dBi 5150 MHz to 5250 MHz: 2.57 dBi 5725 MHz to 5850 MHz: 2.57 dBi Chain 1: Same as chain 0 For MIMO mode (2Tx/2Rx), there are two transmission antennas. Both Chain 0 and Chain 1 used at the same time and antenna ports have uniform output powers. The Chain 0 and Chain 1 antenna ports can be used alone. The transmit signals are correlated with each other. For 2.4 GHz WIFI The directional gain = GANT + 10 log(NANT) dBi = 1.72 + 10 log(2) = 4.73 dBi For 5 GHz WIFI The directional gain = GANT + 10 log(NANT) dBi = 2.57 + 10 log(2) = 5.58 dBi For SISO mode (1Tx/1Rx), there are two transmission antennas. Both Chain 0 and Chain 1 used at the same time and antenna ports have uniform output powers. The Chain 0 and Chain 1 antenna ports cannot be used alone For 2.4 GHz WIFI The antenna gain = Chain 0 or Chain 1 = 1.72 dBi For 5 GHz WIFI The antenna gain = Chain 0 or Chain 1 = 2.57 dBi ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 12 of 16 Report No.: 170615002RFC-5 3.4.1.3 Results for FCC 47 CFR Part 1 Subpart I For SISO (1TX/1RX) Mode Declared maximum Max. positive Calculated Declared conducted tolerance Antenna MPE MPE Freq. maximum maximum Operating Mode average according Gain Limit Value EIRP EIRP output manufacturer power (MHz) (dBm) (dBi) (dBm) (mW) (mW/cm2) IEEE 802.11b 2412- 17 2 1.72 20.72 118.0321 1 0.0235 IEEE 802.11g 2462 SISO 5180- 14 2 2.57 18.57 71.9449 1 0.0143 5240 IEEE 802.11a 5745- 14 2 2.57 18.57 71.9449 1 0.0143 5825 For MIMO (2TX/2RX) Mode Declared maximum Max. positive Calculated Declared conducted Tolerance Directional MPE MPE Freq. maximum maximum Operating Mode average according Gain Limit Value EIRP EIRP output manufacturer power (MHz) (dBm) (dBi) (dBm) (mW) (mW/cm2) 2412- 14 2 4.73 20.73 118.3042 1 0.0235 IEEE 802.11n-HT20 2462 14 2 4.73 20.73 118.3042 1 0.0235 2422- 14 2 4.73 20.73 118.3042 1 0.0235 IEEE 802.11n-HT40 2452 14 2 4.73 20.73 118.3042 1 0.0235 5180- 11 2 5.58 18.58 72.1107 1 0.0143 5240 IEEE 802.11n-HT20 5745- 11 2 5.58 18.58 72.1107 1 0.0143 5825 MIMO (2TX/2RX) 5190- 10 2 5.58 17.58 57.2796 1 0.0114 5230 IEEE 802.11n-HT40 5755- 10 2 5.58 17.58 57.2796 1 0.0114 5795 5180- 9 2 5.58 16.58 45.4988 1 0.0091 IEEE 802.11ac- 5240 VHT20 5745- 9 2 5.58 16.58 45.4988 1 0.0091 5825 5190- 9 2 5.58 16.58 45.4988 1 0.0091 IEEE 802.11ac- 5230 VHT40 5755- 9 2 5.58 16.58 45.4988 1 0.0091 5795 IEEE 802.11ac- 5210 9 2 5.58 16.58 45.4988 1 0.0091 VHT80 5775 9 2 5.58 16.58 45.4988 1 0.0091 ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 13 of 16 Report No.: 170615002RFC-5 3.4.1.4 Results for RSS-102 Issue 5 For SISO (1TX/1RX) Mode Declared maximum Max. positive Calculated Declared conducted tolerance Antenna MPE MPE Freq. maximum maximum Operating Mode average according Gain Limit Value EIRP EIRP output manufacturer power (MHz) (dBm) (dBi) (dBm) (W) (W/m2) IEEE 802.11b 2412- 17 2 1.72 20.72 0.118032 5.35 0.2350 IEEE 802.11g 2462 SISO 5180- 14 2 2.57 18.57 0.071945 9.01 0.1430 5240 IEEE 802.11a 5745- 14 2 2.57 18.57 0.071945 9.69 0.1430 5825 For MIMO (2TX/2RX) Mode Declared maximum Max. positive Calculated Declared conducted Tolerance Directional MPE MPE Freq. maximum maximum Operating Mode average according Gain Limit Value EIRP EIRP output manufacturer power (MHz) (dBm) (dBi) (dBm) (W) (W/m2) 2412- 14 2 4.73 20.73 0.118304 5.35 0.2350 IEEE 802.11n-HT20 2462 14 2 4.73 20.73 0.118304 5.35 0.2350 2422- 14 2 4.73 20.73 0.118304 5.35 0.2350 IEEE 802.11n-HT40 2452 14 2 4.73 20.73 0.118304 5.35 0.2350 5180- 11 2 5.58 18.58 0.072111 9.01 0.1430 5240 IEEE 802.11n-HT20 5745- 11 2 5.58 18.58 0.072111 9.69 0.1430 5825 MIMO (2TX/2RX) 5190- 10 2 5.58 17.58 0.05728 9.01 0.1140 5230 IEEE 802.11n-HT40 5755- 10 2 5.58 17.58 0.05728 9.69 0.1140 5795 5180- 9 2 5.58 16.58 0.045499 9.01 0.0910 IEEE 802.11ac- 5240 VHT20 5745- 9 2 5.58 16.58 0.045499 9.69 0.0910 5825 5190- 9 2 5.58 16.58 0.045499 9.01 0.0910 IEEE 802.11ac- 5230 VHT40 5755- 9 2 5.58 16.58 0.045499 9.69 0.0910 5795 IEEE 802.11ac- 5210 9 2 5.58 16.58 0.045499 9.01 0.0910 VHT80 5775 9 2 5.58 16.58 0.045499 9.69 0.0910 ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 14 of 16 Report No.: 170615002RFC-5 3.4.2 For BT For BT_LE function, operating at 2402MHz to 2480 MHz for GFSK and For BT_EDR function, operating at 2402MHz to 2480 MHz for GFSK, π/4 DQPSK, 8DPSK 3.4.2.1 Antenna Type: Chain 0: PIFA Antenna 3.4.2.2 Antenna Gain: Chain 0: 2402MHz to 2480 MHz: 1.72 dBi 3.4.2.3 Results for FCC 47 CFR Part 1 Subpart I Max. positive Declared maximum Calculated Declared tolerance Antenna MPE MPE Operating Freq. conducted average maximum maximum according Gain Limit Value Mode output power EIRP EIRP manufacturer (MHz) (dBm) (dBm) (dBm) (dBm) (mW) (mW/cm2) 2402- LE 2 2 1.72 5.72 3.7325 1 0.0007 2480 2402- EDR 10 2 1.72 13.72 23.5505 1 0.0047 2480 3.4.2.4 Results for RSS-102 Issue 5 Max. positive Declared maximum Calculated Declared tolerance Antenna MPE MPE Operating Freq. conducted average maximum maximum according Gain Limit Value Mode output power EIRP EIRP manufacturer (MHz) (dBm) (dBm) (dBm) (dBm) (W) (W/m2) 2402- LE 2 2 1.72 5.72 0.0037325 5.35 0.0070 2480 2402- EDR 10 2 1.72 13.72 0.0235505 5.35 0.0470 2480 ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 15 of 16 Report No.: 170615002RFC-5 3.4.3 Simultaneous Multi-band Transmission MPE Analysis 3.4.4.1 List of Mode for Simultaneous Multi-band Transmission No. Configurations Support/Not Support 1 2.4G_SISO_WLAN + BT Not Support 2 2.4G_MIMO_WLAN + BT Not Support 3 5G_SISO_WLAN + BT Not Support 4 5G_MIMO_WLAN + BT Not Support 3.4.4.2 Results for transmit simultaneously Not Applicable ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 16 of 16 Report No.: 170615002RFC-5 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP N/A APPENDIX 2 PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Refer to Appendix 2 for EUT external and internal photographs. *** End of Report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of UnionTrust, this report can’t be reproduced except in full. ShenzhenUnionTrustQualityandTechnologyCo.,Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com


Document Created: 2017-07-24 16:40:57
Document Modified: 2017-07-24 16:40:57
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC