Application Details:
Equipment | Module |
FRN | 0023889280 |
Grantee Code | 2AC23 |
Product Code | -WCT1B |
Applicant Business | Hui Zhou Gaoshengda Technology Co.,LTD |
Business Address | NO.75 Zhongkai Development Area , Huizhou, Guangdong,N/A China |
TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
TCB Email | [email protected] |
Applicant | Hui Guan – |
Applicant Phone | |
Applicant Fax | +86-0752-2096698 |
Applicant Email | [email protected] |
Applicant MailStop | |
Test Firm | Centre Testing International Group Co., Ltd |
Test Firm Contact | Jimmy Li |
Test Firm Phone | |
Test Firm Fax | |
Test Firm Email | [email protected] |
Certified By | Alex Feng – Certification Executive |
Comment [2eEekzpJcIs9Osx49S008w==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes.
Comment [oy7YJNkvD8uBUwHIdcbSBg==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
Comment [SSkK749QA9fhsakHqEqupw==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.