Single Modular approval Declaration letter

FCC ID: 2AC23-W2T

Attestation Statements

Download: PDF
FCCID_4381115

            Single Modular approval Declaration letter
We ,apply Single modular approval for
Product Name: WIFI Module
Model: W2TM2510
FCC ID: 2AC23-W2T
According to 996369 D01 Module Equip Auth Guide v01r04 and 15.212 requirement:

1) The radio elements must have the radio frequency circuitry shielded. Physical
components and tuning capacitor(s) may be located external to the shield, but must
beon the module assembly;
Answer :Yes, The modular have RF own shielding for both side

2) The module must have buffered modulation/data inputs to ensure that the device will
comply with Part 15 requirements with any type of input signal;
Answer :Yes, The modular transmitter have buffered modulation/data inputs.

3)The modular transmitter must have its own power supply regulation.
Answer :Yes, The modular transmitter must have its own power supply regulation

4)The module must contain a permanently attached antenna, or contain a unique antenna
connector, and be marketed and operated only with specific antenna(s), per Sections
15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b);
Answer :Yes ;Device is equipped with Integral antenna.

(5)The module must demonstrate compliance in a stand-alone configuration;
Answer :Yes,distance between modular and all AEs are longer than 10cm ,refer to
setup photo.

(6)The module must be labelled with its permanently affixed FCC ID label, or use an
electronic display (See KDB Publication 784748 about labelling requirements);
Answer :Yes ;The modular has a permanent fixed label, and below statement was listed
in the User Manual;The host device must be labeled to display the FCC ID of the module
Contains FCC ID: 2AC23-W2T

(7)The module must comply with all specific rules applicable to the transmitter including
all the conditions provided in the integration instructions by the grantee;
Answer :Yes ;The module comply with all specific rules applicable to the transmitter
including all the conditions provided in the integration instructions by the grantee, Refer to test
report and user manual .



Document Created: 2019-08-21 04:23:38
Document Modified: 2019-08-21 04:23:38

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC