Test Report DTS WLAN Part 1

FCC ID: 2ABZ2-A6013

Test Report

Download: PDF
FCCID_4004911

FCC RF Test Report Report No. : FR871004-01C FCC RF Test Report APPLICANT : OnePlus Technology (shenzhen) Co., Ltd EQUIPMENT : Smart Phone BRAND NAME : ONEPLUS MODEL NAME : ONEPLUS A6013 FCC ID : 2ABZ2-A6013 STANDARD : FCC Part 15 Subpart C §15.247 CLASSIFICATION : (DTS) Digital Transmission System The product was received on Jul. 10, 2018 and testing was completed on Aug. 23, 2018. We, Sporton International (Shenzhen) Inc., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Shenzhen) Inc., the test report shall not be reproduced except in full. Approved by: Eric Shih / Manager Sporton International (Shenzhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan Shenzhen City Guangdong Province 518055 China Sporton International (Shenzhen) Inc. Page Number : 1 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C TABLE OF CONTENTS REVISION HISTORY.......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 6 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Testing Location ................................................................................................................................ 7 1.7 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency and Channel ........................................................................................................ 8 2.2 Test Mode .......................................................................................................................................... 9 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support Unit used in test configuration and system ........................................................................ 10 2.5 EUT Operation Test Setup .............................................................................................................. 11 2.6 Measurement Results Explanation Example ................................................................................... 11 3 TEST RESULT ........................................................................................................................................... 12 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 12 3.2 Output Power Measurement ............................................................................................................ 14 3.3 Power Spectral Density Measurement ............................................................................................ 15 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 17 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 42 3.6 AC Conducted Emission Measurement........................................................................................... 46 3.7 Antenna Requirements .................................................................................................................... 48 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 49 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 50 APPENDIX A. CONDUCTED TEST RESULTS APPENDIX B. AC CONDUCTED EMISSION TEST RESULT APPENDIX C. RADIATED SPURIOUS EMISSION APPENDIX D. DUTY CYCLE PLOTS APPENDIX E. SETUP PHOTOGRAPHS Sporton International (Shenzhen) Inc. Page Number : 2 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR871004-01C Rev. 01 Initial issue of report Sep. 05, 2018 Sporton International (Shenzhen) Inc. Page Number : 3 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C SUMMARY OF TEST RESULT Report FCC Rule Description Limit Result Remark Section 3.1 15.247(a)(2) 6dB Bandwidth ≥ 0.5MHz Pass - 3.1 - 99% Bandwidth - Pass - 3.2 15.247(b) Power Output Measurement ≤ 30dBm Pass - 3.3 15.247(e) Power Spectral Density ≤ 8dBm/3kHz Pass - Conducted Band Edges Pass - 3.4 15.247(d) ≤ 20dBc Conducted Spurious Emission Pass - Radiated Band Edges and 15.209(a) & Under limit 3.5 15.247(d) Pass 0.51 dB at Radiated Spurious Emission 15.247(d) 2389.24 MHz Under limit 3.6 15.207 AC Conducted Emission 15.207(a) Pass 18.80 dB at 0.61 MHz 15.203 & 3.7 Antenna Requirement N/A Pass - 15.247(b) Sporton International (Shenzhen) Inc. Page Number : 4 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 1 General Description 1.1 Applicant OnePlus Technology (shenzhen) Co., Ltd 18C02, 18C03, 18C04 and 18C05, Shum Yip Terra Building, Binhe Avenue North, Futian District, Shenzhen 1.2 Manufacturer OnePlus Technology (shenzhen) Co., Ltd 18C02, 18C03, 18C04 and 18C05, Shum Yip Terra Building, Binhe Avenue North, Futian District, Shenzhen 1.3 Product Feature of Equipment Under Test Product Feature Equipment Smart Phone Brand Name ONEPLUS Model Name ONEPLUS A6013 FCC ID 2ABZ2-A6013 CDMA/EV-DO/GSM/GPRS/EGPRS/WCDMA/HSPA/ DC-HSDPA/HSPA+/LTE/NFC WLAN 2.4GHz 802.11b/g/n HT20/HT40 EUT supports Radios application WLAN 2.4GHz 802.11ac VHT20/VHT40 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE Conducted: 865208040070859 IMEI Code Conduction: 865208040070206 Radiation: 865208040024997 HW Version 34 SW Version ONEPLUS A6013_34_180810 EUT Stage Production Unit Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Sporton International (Shenzhen) Inc. Page Number : 5 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 1.4 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Channel Frequency Range 2412 MHz ~ 2462 MHz SISO <Ant. 1> 802.11b : 21.27 dBm (0.1340 W) 802.11g : 23.02 dBm (0.2004 W) 802.11n HT20 : 23.02 dBm (0.2004 W) 802.11n HT40 : 22.14 dBm (0.1637 W) SISO <Ant. 2> 802.11b : 18.58 dBm (0.0721 W) Maximum (Peak) Output Power to 802.11g : 20.02 dBm (0.1005 W) antenna 802.11n HT20 : 20.07 dBm (0.1016 W) 802.11n HT40 : 19.50 dBm (0.0891 W) MIMO <Ant. 1 + 2> 802.11b : 23.19 dBm (0.2084 W) 802.11g : 24.87 dBm (0.3069 W) 802.11n HT20 : 24.91 dBm (0.3097 W) 802.11n HT40 : 23.81 dBm (0.2404 W) MIMO <Ant 1> 802.11b : 14.49MHz 802.11g : 17.63MHz 802.11n HT20 : 18.93MHz 802.11n HT40 : 36.66MHz 99% Occupied Bandwidth MIMO <Ant 2> 802.11b : 14.24MHz 802.11g : 17.53MHz 802.11n HT20 : 18.73MHz 802.11n HT40 : 36.46MHz Ant 1: PIFA Antenna type with gain -2.8 dBi Antenna Type / Gain Ant 2: PIFA Antenna type with gain -3.0 dBi 802.11b : DSSS (DBPSK / DQPSK / CCK) Type of Modulation 802.11g/n/ac : OFDM (BPSK / QPSK / 16QAM / 64QAM/256QAM) Ant. 1 Ant. 2 802.11 b/g/n/ac V V Antenna Function for Transmitter SISO 802.11 b/g/n/ac V V MIMO Note: 1. MIMO Ant. 1+2 is a calculated result from sum of the power MIMO Ant. 1 and MIMO Ant. 2. 2. For 802.11n HT20 / ac VHT20 and 802.11n HT40 / ac VHT40 mode, the whole testing have assessed only 802.11n HT20/ HT40 by referring to their higher conducted power. 3. For SISO & MIMO mode, the whole testing has assessed only MIMO mode by referring to their higher conducted power. 1.5 Modification of EUT No modifications are made to the EUT during all test items. Sporton International (Shenzhen) Inc. Page Number : 6 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 1.6 Testing Location Sporton International (Shenzhen) Inc. is accredited to ISO 17025 by National Voluntary Laboratory Accreditation Program (NVLAP code: 600156-0) and the FCC designation No. are CN5018 and CN5019. Test Site Sporton International (Shenzhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan Shenzhen City Guangdong Province 518055 China Test Site Location TEL: +86-755-8637-9589 FAX: +86-755-8637-9595 Sporton Site No. FCC Test Firm Registration No. Test Site No. TH01-SZ CO01-SZ 337463 Test Site Sporton International (Shenzhen) Inc. No. 3 Bldg the third floor of south, Shahe River west, Fengzeyuan Warehouse, Test Site Location Nanshan District Shenzhen City Guangdong Province 518055 China TEL: +86-755-3320-2398 Sporton Site No. FCC Test Firm Registration No. Test Site No. 03CH03-SZ 577730 Note: The test site complies with ANSI C63.4 2014 requirement. 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart C §15.247  FCC KDB Publication No. 558074 D01 DTS Meas. Guidance v04  FCC KDB 662911 D01 Multiple Transmitter Output v02r01.  ANSI C63.10-2013 Remark: 1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. Sporton International (Shenzhen) Inc. Page Number : 7 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 2 Test Configuration of Equipment Under Test a. The EUT has been associated with peripherals and configuration operated in a manner tended to maximize its emission characteristics in a typical application. Frequency range investigated: conduction emission (150 kHz to 30 MHz), radiation emission (9 kHz to the 10th harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower). For radiated measurement, pre-scanned in three orthogonal panels, X, Y, Z. The worst cases (X plane) were recorded in this report. b. AC power line Conducted Emission was tested under maximum output power. 2.1 Carrier Frequency and Channel Freq. Freq. Frequency Band Channel Channel (MHz) (MHz) 1 2412 7 2442 2 2417 8 2447 3 2422 9 2452 2400-2483.5 MHz 4 2427 10 2457 5 2432 11 2462 6 2437 Sporton International (Shenzhen) Inc. Page Number : 8 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 2.2 Test Mode Final test modes are considering the modulation and worse data rates as below table. MIMO Antenna Modulation Data Rate 802.11b 1 Mbps 802.11g 6 Mbps 802.11n HT20 MCS0 802.11n HT40 MCS0 Test Cases AC Mode 1 : GSM1900 Idle + Bluetooth Link + WLAN Link + USB Cable (Charging from Conducted Adapter) + SIM 1 Emission Remark: For Radiated Test Cases, The tests were performed with Adapter and USB Cable. Sporton International (Shenzhen) Inc. Page Number : 9 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 2.3 Connection Diagram of Test System 2.4 Support Unit used in test configuration and system Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. System Simulator Anritsu MT8820C N/A N/A Unshielded, 1.8 m 2. WLAN AP D-Link DIR-820L KA2IR820LA1 N/A Unshielded, 1.8m AC I/P: Unshielded, 1.2 m 3. Notebook Lenovo E540 FCC DoC N/A DC O/P: Shielded, 1.8 m Bluetooth 4. Samsung EO-MG900 N/A N/A N/A Earphone Sporton International (Shenzhen) Inc. Page Number : 10 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 2.5 EUT Operation Test Setup For WLAN function, the engineering test program was provided and enabled to make EUT continuous transmit/receive. For AC power line conducted emissions, the EUT was set to connect with the WLAN AP under large package sizes transmission. 2.6 Measurement Results Explanation Example For all conducted test items: The offset level is set in the spectrum analyzer to compensate the RF cable loss and attenuator factor between EUT conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level is exactly the EUT RF output level. Example: The spectrum analyzer offset is derived from RF cable loss and attenuator factor. Offset = RF cable loss + attenuator factor. Following shows an offset computation example with cable loss 5.0 dB and 10dB attenuator. Offset(dB) = RF cable loss(dB) + attenuator factor(dB). = 5.0 + 10 = 15.0 (dB) Sporton International (Shenzhen) Inc. Page Number : 11 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 3 Test Result 3.1 6dB and 99% Bandwidth Measurement 3.1.1 Limit of 6dB and 99% Bandwidth The minimum 6 dB bandwidth shall be at least 500 kHz. 3.1.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.1.3 Test Procedures 1. The testing follows FCC KDB Publication No. 558074 DTS D01 Meas. Guidance v04. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Make the measurement with the spectrum analyzer's resolution bandwidth (RBW) = 100 kHz. Set the Video bandwidth (VBW) = 300 kHz. In order to make an accurate measurement. The 6 dB bandwidth must be greater than 500 kHz. 5. For 99% Bandwidth Measurement, the spectrum analyzer's resolution bandwidth (RBW) = 1MHz and set the Video bandwidth (VBW) = 3MHz. 6. Measure and record the results in the test report. 3.1.4 Test Setup Sporton International (Shenzhen) Inc. Page Number : 12 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 3.1.5 Test Result of 6dB and 99% Occupied Bandwidth Please refer to Appendix A. Minimum 6dB Bandwidth Maximum 99% Occupied Bandwidth Note : The occupied channel bandwidth is maintained within the band of operation for all of the modulations. Sporton International (Shenzhen) Inc. Page Number : 13 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 3.2 Output Power Measurement 3.2.1 Limit of Output Power For systems using digital modulation in the 2400-2483.5MHz, the limit for peak output power is 30dBm. If transmitting antenna with directional gain greater than 6dBi is used, the peak output power from the intentional radiator shall be reduced below the above stated value by the amount in dB that the directional gain of the antenna exceeds 6 dBi. In case of point-to-point operation, the limit has to be reduced by 1dB for every 3dB that the directional gain of the antenna exceeds 6dBi. 3.2.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.2.3 Test Procedures 1. The testing follows the Measurement Procedure of FCC KDB No. 558074 DTS D01 Meas. Guidance v04 section 9.1.3 PKPM1 Peak power meter method. 2. The RF output of EUT was connected to the power meter by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Measure the conducted output power and record the results in the test report. 5. For MIMO mode, calculation method follows FCC KDB 662911 D01 Multiple Transmitter Output v02r01. 3.2.4 Test Setup 3.2.5 Test Result of Peak Output Power Please refer to Appendix A. 3.2.6 Test Result of Average output Power (Reporting Only) Please refer to Appendix A. Sporton International (Shenzhen) Inc. Page Number : 14 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 3.3 Power Spectral Density Measurement 3.3.1 Limit of Power Spectral Density The peak power spectral density shall not be greater than 8dBm in any 3kHz band at any time interval of continuous transmission. 3.3.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.3.3 Test Procedures 1. The testing follows Measurement Procedure 10.2 Method PKPSD of FCC KDB Publication No. 558074 D01 DTS Meas. Guidance v04 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Make the measurement with the spectrum analyzer's resolution bandwidth (RBW) = 3 kHz. Video bandwidth VBW = 10 kHz In order to make an accurate measurement, set the span to 1.5 times DTS Channel Bandwidth. (6dB BW) 5. Detector = peak, Sweep time = auto couple, Trace mode = max hold, Allow trace to fully stabilize. Use the peak marker function to determine the maximum power level. 6. Measure and record the results in the test report. 7. For MIMO mode, calculation method follows FCC KDB 662911 D01 Multiple Transmitter Output v02r01. If measurements performed using method (2) plus 10 log (N) exceeds the emission limit, the test should choose method (1) before declaring that the device fails the emission limit. Method (1): Measure and sum the spectra across the outputs. The total final Power Spectral Density is from a device with 2 transmitter outputs. The spectrum measurements of the individual outputs are all performed with the same span and number of points, the spectrum value in the first spectral bin of output 1 is summed with that in the first spectral bin of output 2 to obtain the value for the first frequency bin of the summed spectrum. Method (2): Measure and add 10 log (N) dB, where N is the number of outputs. (N=2) Sporton International (Shenzhen) Inc. Page Number : 15 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 3.3.4 Test Setup 3.3.5 Test Result of Power Spectral Density Please refer to Appendix A. Worst Case Power Density (dBm/3kHz) Sporton International (Shenzhen) Inc. Page Number : 16 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 3.4 Conducted Band Edges and Spurious Emission Measurement 3.4.1 Limit of Conducted Band Edges and Spurious Emission Measurement In any 100 kHz bandwidth outside of the authorized frequency band, the emissions which fall in the non-restricted bands shall be attenuated at least 20 dB / 30dB relative to the maximum PSD level in 100 kHz by RF conducted measurement. 3.4.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.4.3 Test Procedures 1. The testing follows FCC KDB Publication No. 558074 D01 DTS Meas. Guidance v04. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Set RBW = 100 kHz, VBW=300 kHz, Peak Detector. Unwanted Emissions measured in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz when maximum peak conducted output power procedure is used. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20 dB per 15.247(d). 5. Measure and record the results in the test report. 6. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 3.4.4 Test Setup Sporton International (Shenzhen) Inc. Page Number : 17 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C 3.4.5 Test Result of Conducted Band Edges and Spurious Emission Temperature : 24~26℃ Test Engineer : Sam Zheng Relative Humidity : 50~53% Number of TX = 2, Ant. 1 (Measured) Test Mode : 802.11b Test Channel : 01 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 18 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11b Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 19 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11b Test Channel : 11 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 20 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11g Test Channel : 01 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 21 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11g Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 22 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11g Test Channel : 11 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 23 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11n HT20 Test Channel : 01 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 24 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11n HT20 Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 25 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11n HT20 Test Channel : 11 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 26 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11n HT40 Test Channel : 03 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 27 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11n HT40 Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 28 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11n HT40 Test Channel : 09 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 29 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Number of TX = 2, Ant. 2 (Measured) Test Mode : 802.11b Test Channel : 01 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 30 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11b Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 31 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0

FCC RF Test Report Report No. : FR871004-01C Test Mode : 802.11b Test Channel : 11 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Shenzhen) Inc. Page Number : 32 of 50 TEL : +86-755-8637-9589 Report Issued Date : Sep. 05, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2ABZ2-A6013 Report Template No.: BU5-FR15CWL Version 2.0


Document Created: 2018-09-06 19:23:05
Document Modified: 2018-09-06 19:23:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC