RF Test Report -CDMA

FCC ID: 2ABZ2-A3000

Test Report

Download: PDF
FCCID_3202539

TEST REPORT No.I16N00975-EMC02 for OnePlus Technology(Shenzhen) Co., Ltd. Mobile Phone Model Name: ONEPLUS A3000 FCC ID: 2ABZ2-A3000 with Hardware Version: 28 Software Version: oxygen 3.5.1 Issued Date: 2016-10-31 Test Laboratory: FCC 2.948 Listed: No.342690 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633, Fax:+86(0)10-62304633Email:cttl@chinattl.com, website:www.chinattl.com ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 2 of 15 REPORT HISTORY Report Number Revision Description Issue Date I16N00975-EMC02 Rev.0 1st edition 2016-10-31 ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 3 of 15 CONTENTS 1. TEST LABORATORY ..............................................................................................................................4 1.1. TESTING LOCATION .........................................................................................................................4 1.2. TESTING ENVIRONMENT ................................................................................................................4 1.3. PROJECT DATA ...................................................................................................................................4 1.4. SIGNATURE ..........................................................................................................................................4 2. CLIENT INFORMATION ........................................................................................................................5 2.1. APPLICANT INFORMATION ............................................................................................................5 2.2. MANUFACTURER INFORMATION .................................................................................................5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ..................................6 3.1. ABOUT EUT ..........................................................................................................................................6 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST..........................................6 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................6 3.4. GENERAL DESCRIPTION .................................................................................................................7 3.5. EUT SET-UPS ........................................................................................................................................7 4. REFERENCE DOCUMENTS ..................................................................................................................8 4.1. REFERENCE DOCUMENTS FOR TESTING ..................................................................................8 5. LABORATORY ENVIRONMENT..........................................................................................................9 6. SUMMARY OF TEST RESULTS ..........................................................................................................10 6.1. SUMMARY OF TEST RESULTS ......................................................................................................10 7. TEST EQUIPMENTS UTILIZED ............................................................................................................. 11 A.1 EMISSION LIMT............................................................................................................................12 ANNEX B: TEST LAYOUT .............................................................................................................................15 ©Copyright. All rights reserved by CTTL.

No. 1 6N00975—EMCO2 Page 4 of 15 1. Test Laboratory 1.1. Testing Location Address: TCL International E city No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen, Guangdong, China Postal Code: 518048 Telephone: +86(755)33322000 Fax: +86(755)33322001 1.2. Testing Environment Normal Temperature: 15—35°C Relative Humidity: 20—75% 1.3. Project data Testing Start Date: 2016—08—31 Testing End Date: 2016—10—29 1.4. Signature Liang Yong (Prepared this test report) iO _A _ZL_ufin"\;‘umhuin C (Reviewed this test report) 4). Cao Junfei Director of the laboratory (Approved this test report) ©Copyright. All rights reserved by CTTL

No.I16N00975-EMC02 Page 5 of 15 2. Client Information 2.1. Applicant Information Company Name: OnePlus Technology(Shenzhen) Co., Ltd. Address: 18/F, Tower C, Tai Ran Building,No.8 Tai Ran Road, Shenzhen, China 2.2. Manufacturer Information Company Name: OnePlus Technology(Shenzhen) Co., Ltd. Address: 18/F, Tower C, Tai Ran Building,No.8 Tai Ran Road, Shenzhen, China ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 6 of 15 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description Mobile Phone Model Name ONEPLUS A3000 FCC ID 2ABZ2-A3000 Remark: The above EUT’s information is declared by manufacturer. Please refer to the specifications or user’s manual for more detailed information. 3.2. Internal Identification of EUT used during the test EUT ID* SN or IMEI EUT 860046039212719 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description SN AE1 Battery / AE2 Travel charger / AE3 USB cable / AE1 Model BLP633 Manufacturer DESAY Capacitance 3400mAh Nominal Voltage 3.85V AE2-1 Model HK0504 Manufacturer SHENZHEN HUNTKEY ELECTRIC CO., LTD SN HC1608500001 AE2-2 Model DC0504A5 Manufacturer SHENZHEN HUNTKEY ELECTRIC CO., LTD SN H11619000004 AE2-3 Model DC0504B5GB Manufacturer LITEON TECHNOLOGY CORPORATION SN LCYYWWWSSSSSS AE3 Model / Manufacturer / Length of cable 102cm *AE ID: is used to identify the test sample in the lab internally. ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 7 of 15 3.4. General Description Equipment Under Test (EUT) is a model of Mobile Phone with integrated antenna. It supports GSM 850/1900;UMTS FDD Band II(W1900)/IV(W1700)/Band V(W850); CDMA Band 0;LTE Band 2/4/5/7/12/17/30/41 It has FM, Camera, MP3, USB, WiFi, Bluetooth, GPS; Samples undergoing test were selected by the Client. 3.5. EUT set-ups EUT set-up No. Combination of EUT and AE Remarks Set.1 EUT+ AE1 ERP/EIRP/RSE tests ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 8 of 15 4. Reference Documents 4.1. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version 10-1-2015 FCC Part 22 PUBLIC MOBILE SERVICES Edition Methods of Measurement of Radio-Noise Emissions from ANSI C63.4 Low-Voltage Electrical and Electronic Equipment in the 2014 Range of 9 kHz to 40 GHz Land Mobile FM or PM Communications Equipment ANSI/TIA-603-D 2010 Measurement and Performance Standards ©Copyright. All rights reserved by CTTL.

No.16N00975—EMCO2 Page 9 of 15 5. LABORATORY ENVIRONMENT Semi—anechoic chamber did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max.=30 °C Relative humidity Min. = 35 %, Max. = 60 % Shielding effectiveness 0.014MHz—1IMHz,>60dB; 1MHz—18000MHz,>90dB Electrical insulation > 2MQ Ground system resistance <4 Q Normalised site attenuation (NSA) < +4 dB, 3 m distance, from 30 to 1000 MHz Shield room did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max.=30 °C Relative humidity Min. =35 %, Max. = 60 % Shielding effectiveness 0.014MHz—1MHz,>60dB; 1MHz—10000MHz,>90dB Electrical insulation > 2MQ Ground system resistance <4 Q Fully—anechoic chamber did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max.=30 °C Relative humidity Min. = 35 %, Max. = 60 % Shielding effectiveness 0.014MHz—1MHz,>60dB; 1MHz—18000MHz,>90dB Electrical insulation > 2MQ Ground system resistance <4 Q Voltage Standing Wave Ratio (VSWR) < 6 dB, from 1 to 18 GHz, 3 m distance Uniformity of field strength Between 0 and 6 dB, from 80 to 3000 MHz ©Copyright. All rights reserved by CTTL

No.I16N00975-EMC02 Page 10 of 15 6. SUMMARY OF TEST RESULTS 6.1. Summary of test results Abbreviations used in this clause: P Pass F Fail Verdict Column NA Not applicable NM Not measured 7. CDMA800 Clause in Section in Items Test Name Verdict FCC rules this report 1 Emission Limit 22.917(a), 2.1051 5.5 P ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 11 of 15 7. Test Equipments Utilized SERIES CAL. DUE CAL. NO. NAME TYPE PRODUCER NUMBER DATE INTERVAL 1. Test Receiver ESCI R&S 100702 2017-06-26 1 Years 2. BiLog Antenna VULB9163 Schwarzbeck 9163 330 2017-04-22 3Years 3. Horn Antenna 3117 ETS-Lindgre 00066577 2019-04-05 3 Years 5. Fully Anechoic Chamber FACT5-2.0 n ETS-Lindgren 4166 2018-05-13 3Year 6. Spectrum Analyzer FSP40 R&S 100378 2016-12-18 1 Year Universal Radio 7. CMU200 R&S 114540 2016-12-24 1 Year Communication Tester ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 12 of 15 ANNEX A: MEASUREMENT RESULTS A.1 EMISSION LIMT Reference FCC: CFR 2.1051, Part 22.917(a), A.2.1 Measurement Method The measurements procedures in TIA-603-D-2010 are used. This measurement is carried out in fully-anechoic chamber 3. The spectrum was scanned from 30 MHz to the 10th harmonic of the highest frequency generated within the equipment, which is the transmitted carrier that can be as high as 1910 MHz. The resolution bandwidth is set 1MHz as outlined in Part 22.917(a). The spectrum was scanned with the mobile station transmitting at carrier frequencies that pertain to low, mid and high channels of CDMA800 . The procedure of radiated spurious emissions is as follows: 1. EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT for emission measurements. The height of receiving antenna is 1.5m. The test setup refers to figure below. Detected emissions were maximized at each frequency by rotating the EUT through 360°and adjusting the receiving antenna polarization. The radiated emission measurements of all non-harmonic and harmonics of the transmit frequency through the 10th harmonic were measured with peak detector. 2. The EUT is then put into continuously transmitting mode at its maximum power level during the test. And the maximum value of the receiver should be recorded as (Pr). 3. The EUT shall be replaced by a substitution antenna. The test setup refers to figure below. ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 13 of 15 In the chamber, an substitution antenna for the frequency band of interest is placed at the reference point of the chamber. An RF Signal source for the frequency band of interest is connected to the substitution antenna with a cable that has been constructed to not interfere with the radiation pattern of the antenna. A power (PMea) is applied to the input of the substitution antenna. Adjust the level of the signal generator output until the value of the receiver reaches the previously recorded (Pr). The power of signal source (PMea) is recorded. The test should be performed by rotating the test item and adjusting the receiving antenna polarization. 4. The Path loss (Ppl) between the Signal Source with the Substitution Antenna and the Substitution Antenna Gain (Ga) should be recorded after test. An amplifier should be connected in for the test. The Path loss (Ppl) is the summation of the cable loss and the gain of the amplifier. The measurement results are obtained as described below: Power (EIRP) = PMea- Ppl + Ga 5. This value is EIRP since the measurement is calibrated using an antenna of known gain (unit: dBi) and known input power. 6. ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP -2.15dB. Note: the result contains vertical part and Horizontal part A.2.2 Measurement Limit Part 22.917(a) specify that the power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The specification that emissions shall be attenuated below the transmitter power (P) by at least 43 + 10 log (P) dB, translates in the relevant power range (1 to 0.001 W) to -13 dBm. At 1 W the specified minimum attenuation becomes 43 dB and relative to a 30 dBm (1 W) carrier becomes a limit of -13 dBm. At 0.001 W (0 dBm) the minimum attenuation is 13 dB, which again yields a limit of -13 dBm. In this way a translation of the specification from relative to absolute terms is carried out. A.2.3 Measurement Results Radiated emissions measurements were made only at the upper, middle, and lower carrier frequencies of the CDMA BC0 (836.52MHz, 848.31MHz and 824.7MHz). It was decided that measurements at these three carrier frequencies would be sufficient to demonstrate compliance with emissions limits because it was seen that all the significant spurs occur well outside the band and no radiation was seen from a carrier in one block of the CDMA BC0 into any of the other blocks. The equipment must still, however, meet emissions requirements with the carrier at all frequencies over which it is capable of operating and it is the manufacturer's responsibility to verify this. ©Copyright. All rights reserved by CTTL.

No.116N00975—EMCO2 Page 14 of 15 The worst case CDMA BCO, Channel 384/836.52MHz Frequency PMea Pol Ga Peak Limit Polarit (MHz) (dBm) (dB) (dBi) ERP (dBm> ciarty 7351 ~54.98 1.80 11.91 47.02 13.00 Vertical 75285 <53.41 1.80 11.91 ~45.45 13.00 Vertical 8369 —5514 1.90 1217 47.02 13.00 Vertical 8727.5 —55.67 1.90 12.7 —47.02 13.00 Vertical 9201 —50.94 210 12.89 —42.30 —13.00 Vertical 9366.5 —55.06 210 12.89 ~46.42 13.00 Vertical CDMA BCO, Channel 777/848.31MHz Frequency PMea Ppl Ga Peak Limit . (MHz) (dBm) (dB) (dBi) ERP (dBm)> Polarity 8501 ~56.20 1.90 12.7 47.55 13.00 Vertical 8650 —55.94 1.90 12.7 47.29 —13.00 Vertical 8689.5 —56.26 1.90 12.7 ~47.61 13.00 Vertical 9173 ~55.86 200 12.89 4712 13.00 Vertical 9204 —54.88 210 12.89 ~46.24 —13.00 Vertical 9344 —55.76 210 12.96 —47.05 13.00 Vertical CDMA BCO, Channel 1013/824.7MHz Frequency PMea Ppl Ga Peak ERP Limit Polarity (MHz) (dBm) (dB) (dBi) (dBm) (dBm> 7422 ~54.31 1.80 11.91 ~46.35 13.00 Vertical 81755 ~55.21 1.80 1217 —46.99 —13.00 Vertical 9073.5 152.37 2.00 12.89 —43.63 13.00 Vertical 92125 —55.73 210 12.89 47.09 13.00 Horizontal 9406 —55.83 210 12.96 4712 13.00 Vertical 99015 ~557 220 1341 ~46.95 —13.00 Vertical Note: Expanded measurement uncertainty for CDMA800 (BC0O) is : below 3GHz: 3.14dB (k=2); Above 3GHz: 4.86 dB (k=2) ©Copyright. All rights reserved by CTTL.

No.I16N00975-EMC02 Page 15 of 15 ANNEX B: TEST LAYOUT Pic.1 Radiated spurious emission(below 3GHz) Pic.1 Radiated spurious emission(Above 3GHz) ***END OF REPORT*** ©Copyright. All rights reserved by CTTL.


Document Created: 2019-07-09 20:40:01
Document Modified: 2019-07-09 20:40:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC