RF Test Report-GSM

FCC ID: 2ABZ2-A3000

Test Report

Download: PDF
FCCID_3202536

TEST REPORT No. I16N00975-GSM for OnePlus Technology(Shenzhen) Co., Ltd. Mobile Phone Model Name: ONEPLUS A3000 FCC ID: 2ABZ2-A3000 with Hardware Version: 28 Software Version: oxygen OS 3.5.1 Issued Date: 2016-11-03 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: FCC 2.948 Listed: No. 342690 CTTL,Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512, Fax:+86(0)10-62304633-2504 Email: cttl_terminals@catr.cn, website: www.chinattl.com ©Copyright. All rights reserved by CTTL.

REPORT HISTORY Report Number Revision Description Issue Date I16N00975-GSM Rev.0 1st edition 2016-11-03 NOTE: All the original values of this report quoted directly from No.I16N00359, except values of RSE and ERP/EIRP. ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page3 of 17 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 4 1.1. TESTING LOCATION .................................................................................................................... 4 1.2. TESTING ENVIRONMENT ........................................................................................................... 4 1.3. PROJECT DATA .............................................................................................................................. 4 1.4. SIGNATURE ..................................................................................................................................... 4 2. CLIENT INFORMATION ................................................................................................................... 5 2.1. APPLICANT INFORMATION ....................................................................................................... 5 2.2. MANUFACTURER INFORMATION ............................................................................................ 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 6 3.1. ABOUT EUT ..................................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 6 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 6 3.4. GENERAL DESCRIPTION ............................................................................................................ 7 4. REFERENCE DOCUMENTS ............................................................................................................. 8 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 8 5. LABORATORY ENVIRONMENT ..................................................................................................... 9 6. SUMMARY OF TEST RESULTS ..................................................................................................... 10 7. TEST EQUIPMENTS UTILIZED .....................................................................................................11 ANNEX A: MEASUREMENT RESULTS................................................................................................ 12 A.1 EMISSION LIMIT ............................................................................................................................. 12 ©Copyright. All rights reserved by CTTL.

No. 16N000975—GSM Page4 of 17 1. Test Laboratory 1.1. Testing Location Company Name: CTTL ShenZhen,Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT Address: TCL International E city No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen, Guangdong, China Postal Code: 518048 Telephone: +86(755)33322000 Fax: +86(755)33322000 1.2. Testing Environment Normal Temperature: 15—35°C Relative Humidity: 20—75% Air pressure 980 — 1040 hPa The climatic requirements above are general exclude the special requirements for dedicated test environments listed in section 5 and some specific test cases in other parts of this report. 1.3. Project data Testing Start Date: 2016—08—31 Testing End Date: 2016—11—03 1.4. Signature 4 uk "3_ m\ * ! : Jr{‘.'- ,'.qf,\;l‘l” "f Lal Mltl'lflhll.d (Prepared this test report) L ¢ Shen S-I.unminu | (Revie l;II‘.hIEtBS'l ort) Ma Zhlguu Deputy Director of the laboratory (Approved this test report) ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page5 of 17 2. Client Information 2.1. Applicant Information Company Name: OnePlus Technology(Shenzhen) Co., Ltd. Address /Post: 18/F, Tower C, Tai Ran Building,No.8 Tai Ran Road, Shenzhen, China Contact Person: Kevin Ke Contact Email keyoujiang@oneplus.cn Telephone: 0755 61898696 EXT 7023 Fax: / 2.2. Manufacturer Information Company Name: OnePlus Technology(Shenzhen) Co., Ltd. Address /Post: 18/F, Tower C, Tai Ran Building,No.8 Tai Ran Road, Shenzhen, China Contact Person: Kevin Ke Contact Email keyoujiang@oneplus.cn Telephone: 0755 61898696 EXT 7023 Fax: / ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page6 of 17 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description Mobile Phone Model Name ONEPLUS A3000 FCC ID 2ABZ2-A3000 Antenna Integrated Output power 31.82dBm maximum EIRP measured for PCS1900 Extreme vol. Limits 3.4VDC to 4.32VDC (nominal: 3.8VDC) Extreme temp. Tolerance -30°C to +50°C Note: Components list, please refer to documents of the manufacturer; it is also included in the original test record of CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT 3.2. Internal Identification of EUT used during the test EUT ID* IMEI HW Version SW Version Sample Arrival Date S01 860046030175725 28 oxygen OS 3.5.1 2016-08-31 S02 860046030175667 28 oxygen OS 3.5.1 2016-08-31 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description AE1 Battery1 AE2 Battery2 AE3 Charger1 AE4 Charger2 AE5 Charger3 AE1 Model BLP613 Manufacturer Leung's Communication & Electric Products(Guangzhou) LTD. Capacitance 3000mAh AE2 Model BLP633 Manufacturer Dessary Capacitance 3400mAh AE3 Model HK0504 Manufacturer SHENZHEN HUNTKEY ELECTRIC CO., LTD AE4 Model DC0504A5 Manufacturer SHENZHEN HUNTKEY ELECTRIC CO., LTD AE5 Model DC0504B5GB Manufacturer LITEON TECHNOLOGY CORPORATION ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page7 of 17 *AE ID: is used to identify the test sample in the lab internally. 3.4. General Description The Equipment Under Test (EUT) is a model HSDPA/HSUPA/UMTS Triband / GSM quadband / LTE / CDMA mobile phone with integrated antenna. Manual and specifications of the EUT were provided to fulfil the test. ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page8 of 17 4. Reference Documents 4.1. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC Part 24 PERSONAL COMMUNICATIONS SERVICES 10-1-15 Edition FCC Part 22 PUBLIC MOBILE SERVICES 10-1-15 Edition FCC Part 2 FREQUENCY ALLOCATIONS AND RADIO TREATY 10-1-15 MATTERS; GENERAL RULES AND REGULATIONS Edition ANSI/TIA-603-C Land Mobile FM or PM Communications Equipment 2004 Measurement and Performance Standards ANSI C63.4 Methods of Measurement of Radio-Noise Emissions from 2009 Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz KDB 971168 D01 Measurement Guidance for Certification of Licensed Digital v02r02 Transmitters ©Copyright. All rights reserved by CTTL.

No. 16N000975—GSM (llélll» Page9 of 17 5. LABORATORY ENVIRONMENT Control room / conducted chamber did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max. = 85 °C Relative humidity Min. =20 %, Max. = 80 % Shielding effectiveness > 110 dB Electrical insulation > 2 MQ Ground system resistance <0.5 Q Fully—anechoic chamber 2 (8.6 meters X 6.1 meters X 3.85 meters) did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max. = 80 °C Relative humidity Min. = 35 %, Max. = 60 % Shielding effectiveness > 110 dB Electrical insulation > 2 MQ Ground system resistance <1 Q Site voltage standing—wave ratio (Syswn) Between 0 and 6 dB, from 1GHz to 18GHz Uniformity of field strength Between 0 and 6 dB, from 80 to 4000 MHz Semi—anechoic chamber 2 / Fully—anechoic chamber 3 (10 meters X6.7 maters X6.15 meters) did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max. = 80 °C Relative humidity Min. = 35 %, Max. = 60 % Shielding effectiveness > 100 dB Electrical insulation > 2 MQ Ground system resistance <0.5 Q Normalised site attenuation (NSA) < +3.5 dB, 3 m distance Site voltage standing—wave ratio (Syswn) Between 0 and 6 dB, from 1GHz to 18GHz Uniformity of field strength Between 0 and 6 dB, from 80 to 3000 MHz ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page10 of 17 6. SUMMARY OF TEST RESULTS Items List Clause in FCC rules Verdict 1 Emission Limit 2.1051/22.917/24.238 P ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page11 of 17 7. Test Equipments Utilized SERIES CAL DUE NO. Description TYPE MANUFACTURE NUMBER DATE 1 Test Receiver ESCI 100701 R&S 2017.08.10 2 BiLog Antenna VULB9163 9163 329 Schwarzbeck 2017.01.20 3 Horn Antenna 3117 00066577 ETS-Lindgren 2017.04.01 Universal Radio 4 Communication CMU200 114544 R&S 2017.09.09 Tester 5 Spectrum Analyser FSP40 100378 R&S 2016.12.18 ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page12 of 17 ANNEX A: MEASUREMENT RESULTS A.1 EMISSION LIMIT A.1.1 Measurement Method The measurement procedures in TIA-603C-2004 are used. The spectrum was scanned from 30 MHz to the 10th harmonic of the highest frequency generated within the equipment, which is the transmitted carrier that can be as high as 1910 MHz. The resolution bandwidth is set as outlined in Part 24.238 and Part 22.917. The spectrum is scanned with the mobile station transmitting at carrier frequencies that pertain to low, mid and high channels of PCS1900 and GSM850. The procedure of radiated spurious emissions is as follows: 1. EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT for emission measurements. The height of receiving antenna is 1.5m. The test setup refers to figure below. Detected emissions were maximized at each frequency by rotating the EUT through 360° and adjusting the receiving antenna polarization. The radiated emission measurements of all non-harmonic and harmonics of the transmit frequency through the 10th harmonic were measured with peak detector. 2. The EUT is then put into continuously transmitting mode at its maximum power level during the test. And the maximum value of the receiver should be recorded as (Pr). 3. The EUT shall be replaced by a substitution antenna. The test setup refers to figure below. In the chamber, an substitution antenna for the frequency band of interest is placed at the reference point of the chamber. An RF Signal source for the frequency band of interest is ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page13 of 17 connected to the substitution antenna with a cable that has been constructed to not interfere with the radiation pattern of the antenna. A power (PMea) is applied to the input of the substitution antenna, and adjust the level of the signal generator output until the value of the receiver reach the previously recorded (Pr). The power of signal source (PMea) is recorded. The test should be performed by rotating the test item and adjusting the receiving antenna polarization. 4. The Path loss (Ppl) between the Signal Source with the Substitution Antenna and the Substitution Antenna Gain (Ga) should be recorded after test. A amplifier should be connected in for the test. The Path loss (Ppl) is the summation of the cable loss and the gain of the amplifier. The measurement results are obtained as described below: Power(EIRP)=PMea - Ppl - Ga 5. This value is EIRP since the measurement is calibrated using an antenna of known gain (2.15 dBi) and known input power. 6. ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP -2.15dBi. ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page14 of 17 A.1.2 Measurement Limit Part 24.238 and Part 22.917 specify that the power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The specification that emissions shall be attenuated below the transmitter power (P) by at least 43 + 10 log (P) dB, translates in the relevant power range (1 to 0.001 W) to -13 dBm. At 1 W the specified minimum attenuation becomes 43 dB and relative to a 30 dBm (1 W) carrier becomes a limit of -13 dBm. At 0.001 W (0 dBm) the minimum attenuation is 13 dB, which again yields a limit of -13 dBm. In this way a translation of the specification from relative to absolute terms is carried out. A.1.3 Measurement Results Radiated emissions measurements were made only at the upper, middle, and lower carrier frequencies of the PCS1900 band (1850.2 MHz, 1880 MHz and 1909.8 MHz) and GSM850 band (824.2MHz, 836.6MHz, 848.8MHz) . It was decided that measurements at these three carrier frequencies would be sufficient to demonstrate compliance with emissions limits because it was seen that all the significant spurs occur well outside the band and no radiation was seen from a carrier in one block of the PCS1900 ,GSM850 into any of the other blocks. The equipment must still, however, meet emissions requirements with the carrier at all frequencies over which it is capable of operating and it is the manufacturer's responsibility to verify this. ©Copyright. All rights reserved by CTTL.

No. I16N000975-GSM Page15 of 17 A.1.4 Measurement Results Table Frequency Channel Frequency Range Result GSM 850MHz Low 30MHz-10GHz Pass Middle 30MHz-10GHz Pass High 30MHz-10GHz Pass GSM 1900MHz Low 30MHz-20GHz Pass Middle 30MHz-20GHz Pass High 30MHz-20GHz Pass A.1.5 Sweep Table Working Subrange RBW VBW Sweep time (s) Frequency (GHz) 0.03~1 100KHz 300KHz 10 1-2 1 MHz 3 MHz 2 850MHz 2~5 1 MHz 3 MHz 3 5~8 1 MHz 3 MHz 3 8~10 1 MHz 3 MHz 3 0.03~1 100KHz 300KHz 10 1-2 1 MHz 3 MHz 2 2~5 1 MHz 3 MHz 3 5~8 1 MHz 3 MHz 3 1900MHz 8~11 1 MHz 3 MHz 3 11~14 1 MHz 3 MHz 3 14~18 1 MHz 3 MHz 3 18~20 1 MHz 3 MHz 2 ©Copyright. All rights reserved by CTTL.

m No. 16N000975—GSM _ ‘/"/"/, Page16 of 17 l GSM Mode Channel 128/824.2MHz Antenna Correction Peak Limit ul Frequency{MHz) Pysa(IBmMm) Gain (dB) ERP(dBm) CdBm> Polarization 8097 —56.9 1.8 —13.46 ~45.24 —13.00 H 8156.5 —56.91 1.8 —13.46 ~45.25 —13.00 H 85945 —56.44 1.9 —13.66 —44.68 —13.00 V 9152 —56.75 2.0 —13.78 ~44.97 —13.00 V 9255 —55.95 2.1 —13.78 ~44.27 —13.00 V 9320 —56.25 2.1 —13.79 ~44.56 —13.00 V GSM Mode Channel 190/836.6MHz Frequency{(MHz) Pmea(dBm) Argz?nna CO:I:BC;IOH ER';TSI:m) (:;Ig::) Polarization 8065.5 —56.63 1.8 —13.46 ~44.97 —13.00 V 8160.5 —56.73 1.8 —13.46 ~45.07 —13.00 H 8592 —56.75 1.9 —13.66 —44.99 —13.00 H 8688 .5 —55.71 1.9 —13.66 ~43.95 —13.00 V 9259 —56.4 2.1 —13.78 ~44.72 —13.00 V 9409.5 —56.77 2.1 —13.79 ~45.08 —13.00 V GSM Mode Channel 251/848.8MHz Antenna Correction Peak Limit Frequency{MHz) Pmea(dBm) Gain (dB) ERP(dBm) CdBm> Polarization 7361.5 —56.32 1.8 —13.1.0 ~45.02 —13.00 H 8693.5 —57.04 1.9 —13.66 ~45.28 —13.00 V 9189 —56.21 2.0 —13.78 ~44.43 —13.00 V 9259.5 —56.65 2.1 —13.79 —44.96 —13.00 V 9316.5 —56.57 2.1 —13.79 —44.88 —13.00 H 9419.5 —56.74 2.1 —13.79 ~45.05 —13.00 H ©Copyright. All rights reserved by CTTL.

No. 16N000975—GSM a=777 Page17 of 17 l GSM Mode Channel 512/1850.2MHz Frequency(MHz) Puea(dBm} iné:: EIRFI‘De(ZLI;m) Lgnr:;d Polarization 17198.06 ~45.14 —13.11 —34.93 —13.00 H 17347.69 ~45.74 —13.45 —35.19 —13.00 H 17446.78 —45.18 —13.45 —34.63 —13.00 H 17591.16 ~45.73 —13.66 —35.07 —13.00 H 17814.94 ~45.19 —13.71 —34.58 —13.00 V 17843.81 —44.25 —13.71 —33.64 —13.00 H GSM Mode Channel 661/1880.0MHz Frequency(MHz) Pmea{dBm}) in;:: EIRFI;e(ZLI(Bm) L:;nr:;d Polarization 17203.97 —48.85 —13.11 —35.74 —13.00 H 17369.34 —48.89 —13.45 —35.44 —13.00 H 17455.31 —48.67 —13.45 —35.22 —13.00 H 17625.94 —48.71 —13.66 —35.05 —13.00 H 17782.13 —48.56 —13.71 —34.85 —13.00 H 17917.97 ~47.74 —13.71 —34.03 —13.00 H GSM Mode Channel 810/1909.8MHz Frequency(MHz) Puea(dBm} znéear;: EIRPPiZEm) Lgnr:;d Polarization 16957.88 —47.61 —13.11 —34.50 —13.00 H 17196.09 —47.81 —13.11 —34.70 —13.00 H 17275.5 —48.28 —13.11 —35.17 —13.00 H 17415.28 —48.04 —13.45 —34.59 —13.00 H 17772.94 —46.73 —13.71 —33.02 —13.00 H 17926.5 —46.94 —13.71 —33.23 —13.00 H ***END OF REPORT*** ©Copyright. All rights reserved by CTTL.


Document Created: 2017-12-18 03:05:21
Document Modified: 2017-12-18 03:05:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC