User Manual_Part I_R1

FCC ID: 2ABYNV350

Users Manual

Download: PDF
FCCID_3935593

Foreword Warning Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This V350S camera flash applies to SONY series cameras and is Do not disassemble. Should repairs become necessary, this compatible with TTL autoflash. With this TTL compatible flash, your product must be sent to an authorized maintenance center. shooting will become simpler. You can easily achieve a correct flash Keep out of reach of children. exposure even in complex light-changing environments. This Stop using this product if it breaks open due to extrusion, falling camera flash features: or strong hit. Otherwise, electric shock may occur if you touch ● GN36 (m ISO 100, @105mm). the electronic parts inside it. ● Pro 2000mAh Li-ion Battery –- 0.1s~1.7s recycle –- over 500 full Do not fire the flash directly into the eyes (especially those of power pops. babies) within short distances. Otherwise visual impairment ● Fully support Sony TTL camera flash. Workable as Master or may occur. Slave unit in a wireless flash group. Do not use the flash unit in the presence of flammable gases, ● With built-in 2.4GHz wireless remote system to support chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting transmitting and receiving. from this flash unit and fire or electromagnetic interference may ● Provided multiple functions, include manual flash, multi flash, HSS result. (up to 1/8000s), rear curtain sync, FEC, etc. Do not leave or store the flash unit if the ambient temperature ● Support with firmware upgrade. reads over 50℃. Otherwise the electronic parts may be damaged. Turn off the flash unit immediately in the event of malfunction. - 27 - - 28 -

Contents 27 Foreword 28 Warning 31 Name of Parts Body Control Panel LCD Panel What's in the Box of V350S? Separately Sold Accessories 33 Battery 35 Attaching to a Camera 35 Power Management 36 Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) Shutter Sync Setting 38 Flash Mode – M: Manual Flash 39 Flash Mode – Multi: Stroboscopic Flash 40 Wireless Flash Shooting: Radio (2.4G) Transmission Wireless Settings Setting Master Unit’s Flash Mode Setting the Communication Channel Wireless ID Settings TTL: Fully Automatic Wireless Flash Shooting M: Wireless Flash Shooting with Manual Flash Multi: Wireless Flash Shooting with Manual Flash 45 Other Applications Pioneering Li-ion Camera Flash Auto Focus Assist Beam Bounce Flash Creating a Catchlight Conventions used in this Manual ZOOM: Setting the Flash Coverage and Using the Wide Panel ● This manual is based on the assumption that both the camera and Low Battery Indicator camera flash’s power switches are powered on. 47 C.Fn: Setting Custom Functions ● Reference page numbers are indicated by “p.**”. 48 Protection Function ● The following alert symbols are used in this manual: 49 Firmware Upgrade The Caution symbol gives supplemental information. 49 Technical Data The Note symbol indicates a warning to prevent shooting 51 Troubleshooting problem. 52 Compatible Camera Models 52 Maintenance - 29 - - 30 -

● LCD Panel Name of Parts (1) TTL Autoflash Zoom : zoom display Focus length 01 TTL : TTL autoflash 02 03 09 04 : High-speed Flash exposure 05 sync (Page 36) compensation amount 06 (2)M Manual Flash M : Manual flash 07 MODE ZOOM SYNC SLAVE Manual flash output 10 08 (3)Multi Flash ● Body Multi : Stroboscopic flash 01. Catchlight Panel 06. Hotshoe 02. Built-in Wide Panel 07. LCD Panel Number of flashes 03. Flash Head 08. Lock Ring Flash frequency 04. Optic Control Sensor 09. Battery Compartment 05. Focus Assist Beam 10. USB Port 12 13 (4) Radio Transmission Shooting 11 MODE ZOOM SYNC SLAVE 14 19 ● Master Unit Flash mode 17 18 16 SET 15 20 21 Firing group ● Control Panel Master Channel 11. <MODE>Mode Selection Button press for 2 seconds) 12. <ZOOM>Zoom Selection Button 18. < > Wireless Selection 13.<SYNC>High-Speed Sync Button Button (reusable button, long ● Slave Unit 14. <SLAVE> S1/S2 Optic Slave press for 2 seconds) Triggering Selection Button 19. <GR/CH> Group/Channel Button (in non-wireless mode) (reusable button, in wireless 15. < > Power Switch mode) 16. < > Test Button / Flash Ready 20. Select Dial Indicator. 21.<SET> Set Button Slave 17. < >Custom Function Setting Button (reusable button, long - 31 - - 32 -

● What’s in the Box of V350S? ● Loading and Unloading the Battery 1. Flash unit 2. Mini stand 3. Protection case 4. Diffuser 5. Li-ion battery pack 6. Battery charger 7. Battery charger cable 8. Instruction manual 1 To load the battery, push the battery compartment cover downward and open it, and ● Separately Sold Accessories the battery pack will pop out. The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: XPro, X1T-S wireless flash trigger, Mini softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc. 2 To load the battery, according to the triangle sign on the battery pack, insert it into the compartment until it is locked. Then close the compartment. Battery ● Battery Level Indication Make sure the battery pack is securely loaded in the flash. Check ● Features the battery level indication on the LCD panel to see the remaining 1. This flash unit uses Li-ion polymer battery which has long runtime. battery level. The available charge-and-discharge times are 500. Battery Level Indication Meaning 2. It is reliably safe. The inner circuit is against overcharge, 2 grids Full overdischarge, overcurrent, and short circuit. 3. Take only 2.5 hours to fully charge the battery by using the 1 grid Middle standard battery charger. Blank grid Low Blinking The battery level is going to be used out ● Cautions immediately. And the flash will auto power off 1. Do not short circuit. in 1 minute. 2. Do not expose to rain or immerse into water. This battery is not Note: Please recharge the battery as soon as possible (within 10 days). Then, the battery can be water proof. used or be placed for long period. 3. Keep out of reach of children. 4. No over 24 hours’continuous charging. 5. Store in dry, cool, ventilated places. 6. Do not put aside or into fire. 7. Dead batteries should be disposed according to local regulations. 8. Please charge the battery to approx. 60% before being placed for long time. 9. If the battery had ceased using for over 3 months, please make a full recharge. - 33 - - 34 -

Attaching to a Camera Flash Mode: TTL Autoflash This flash has three flash modes: TTL, Manual (M), and Multi 1 Attach the Camera Flash. ● Slip the camera flash’s mounting foot into the (Stroboscopic). In TTL mode, the camera and the flash will work together to calculate the correct exposure for the subject and the background. In this mode, multiple TTL functions are available: camera’s hotshoe all the FEC, HSS, second curtain sync, etc. way. * Press <MODE> Mode Selection Button and three flash modes will display on the LCD panel one by one with each pressing. TTL Mode 2 Secure the Camera Flash. ● Rotate the lock ring on the mounting foot until it locks Press <MODE> Mode Selection Button to enter TTL mode. The LCD panel will display <TTL>. up. ● Press the camera release button halfway to focus. ● When the shutter button is fully pressed, the flash will fire a pre- flash that the camera will use to calculate exposure and flash output the instant before the photo is taken. 3 Detach the Camera Flash. ● Rotate the lock ring on the Display“HI”: When the flash output value is up to the maximum mounting foot until it is value, “HI”will be displayed and blinking for 3 seconds. Adjust loosened. the camera’s parameters if underexposure appears. Display“Lo”: When the flash output value is up to the minimum value, “Lo”will be displayed and blinking for 3 seconds. Adjust the camera’s parameters if overexposure appears. FEC: Flash Exposure Compensation With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where minor adjusting of the TTL system is needed based on the environment. Power Management Setting FEC: Use Power Switch to power the flash unit on (Long press the button for one second) or off. Turn off if it will not be used for an MODE ZOOM SYNC SLAVE 1 Press the SET Button and the flash exposure compensation amount will be extended period of time. Setting as a master flash, it will turn the SET highlighted on the LCD panel. power off automatically after a certain period (approx. 90 seconds) of idle use. Pressing the camera shutter halfway or pressing any flash button will wake up the flash unit. Setting as a slave flash, it will enter sleep mode after a certain period (adjustable, 60 minutes by default) of idle use. Pressing any flash button will wake it up. 2 Turn the Select Dial to set the amount. ● “0.3”means 1/3 step, C.Fn Disabling Auto Power Off function is recommended “0.7”means 2/3 step. when the flash is used off camera. (C.Fn-ST, Page 47) ● To cancel the flash exposure compensation, SET MODE ZOOM SYNC SLAVE set the amount to “+0”. SET 3 Press < SET > button again to confirm the setting. - 35 - - 36 -

Shutter Sync Settings: Flash Mode – M: Manual Flash 1. High-speed sync: press the <SYNC> button and is displayed on the LCD panel. Press the MENU or shortcut Fn on The flash output is adjustable from 1/1 full power to 1/128th power in 1/3rd stop increments. To obtain a correct flash exposure, use a Sony camera to enter Flash Mode and choose Fill-flash . hand-held flash meter to determine the required flash output. Then,set the camera shutter. 2. Second-curtain sync: press the MENU or shortcut Fn on Sony MODE ZOOM MODE ZOOM SYNC SLAVE SYNC SLAVE 1 Press < MODE > button so that < M > is displayed. camera to enter Flash Mode and choose REAR flash REAR . Then, SET set the camera shutter. ● With high-speed sync, the faster the shutter speed, the SET 2 Turn the Select Dial to choose a desired flash output amount. In high-speed sync mode, shorter the effective flash range. the adjustable flash range is ● Multi flash mode cannot be set in high-speed sync mode. 1/16~1/1. ● Over-temperature protection may be activated after 15 consecutive high-speed sync flashes. ● Try to avoid using high-speed sync flash, which will cut Flash Output Range short flash tube’s lifetime. The following table makes it easier to see how the stop changes in terms of f/stop when you increase or decrease the flash output. For example, when you decrease the flash output to 1/2, 1/2-0.3, or 1/2- 0.7, and then increase the flash output to more than 1/2, 1/2+0.3, 1/2+0.7, and 1/1 will be displayed. Figures displayed when reducing flash output level 1/1-0.3 1/1-0.7 1/2-0.3 1/2-0.7 ······ 1/1 1/2 1/4 1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3 ······ Figures displayed when increasing flash output level In the M mode, high-speed sync and rear curtain sync functions can be achieved. Optical S1 Secondary Unit Setting In M manual flash mode, press the <SLAVE> button so that this flash can function as an optic S1 secondary flash with optic sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects. Optical S2 Secondary Unit Setting Press the <SLAVE> button so that this flash can also function as an optic S2 secondary flash with optic sensor in M manual flash mode. This is useful when cameras have pre-flash function. With this function, the flash will ignore a single “preflash” from the main flash and will only fire in response to the second, actual flash from the main unit. ● S1 and S2 optic triggering and off camera high-speed mode are only available in M manual flash mode. - 37 - - 38 -

Maximum Stroboscopic Flashes: Flash Mode – Multi: Stroboscopic Flash Flash Hz 1 2 3 4 5 6-7 8-9 10 20-50 60-99 output With stroboscopic flash, a rapid series of flashes is fired. It can be 1/4 6 3 2 2 2 2 2 2 2 2 used to capture a multiple images of a moving subject in a single photograph. 1/8 14 14 6 4 3 3 3 2 2 2 You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. 1/16 30 30 30 20 10 8 5 3 3 3 MODE ZOOM SYNC SLAVE 1 Press <MODE> button so that <Multi> is displayed. 1/32 1/64 60 60 60 50 50 40 12 5 5 5 MODE ZOOM SYNC SLAVE 90 90 90 80 80 70 60 20 10 10 SET SET 2 Turn the Select Dial to choose a desired flash output. 1/128 90 90 90 90 90 90 80 70 30 20 Wireless Flash Shooting: Radio (2.4G) Transmission 3 Set the flash frequency and flash times. ● Press the SET Button to ● You can set up three slave groups for TTL autoflash shooting. select the flash frequency. With TTL autoflash, you can easily create various lighting effects. Turn the Select Dial to set ● Any flash settings for the slave units on the master flash in TTL the number. mode will be automatically sent to the slave units. So the only SET ● Press the SET Button thing you need to do is to set the master unit for each slave group MODE ZOOM SYNC SLAVE again to select the flash without any operation for the slave units at all during the shooting. times. Turn the Select Dial to set the number. ● This flash can work in TTL /M /Multi / OFF flash modes when set SET as a master unit. When using Godox 2.4G wireless X system, V350S is perfectly Calculating the Shutter Speed compatible with other products of our company. During stroboscopic flash, the shutter remains open until the firing As a master unit, V350S can control the following slave unit stops. Use the formula below to calculate the shutter speed and set models: AD600, AD600M, AD360II-C, AD360II-N, V860IIS, V850II, it with the camera. TT685S, TT600. As a slave unit, V350S can be controlled by the following master Number of Flashes / Flash Frequency = Shutter Speed unit models: XPro, X1T-S, V860IIS, V850II, TT685S, TT600. For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter speed should be at least 2 seconds. ● Even with multiple slave units, the master unit can control all of them via wireless. To avoid overheating and deteriorating the flash head, do not ● In this user manual, “master unit” refers to the camera flash use stroboscopic flash more than 10 times in succession. on a camera and “slave unit” will be controlled by the After 10 times, allow the camera flash to rest for at least 15 master unit. minutes. If you try to use the stroboscopic flash more than 10 times in succession, the firing might stop automatically to 1. Wireless Settings protect the flash head. If this happens, allow at least 15 minutes’ rest for the camera flash. You can switch between normal flash and wireless flash. For normal flash shooting, be sure to set the wireless setting to OFF. ● Stroboscopic flash is most effective with a highly reflective Master Unit Setting subject against a dark background. Using a tripod and a remote control is recommended. ● ● Stroboscopic flash can be used with“buLb”. ● If the number of flashes is displayed as “--”, the firing will MODE ZOOM SYNC SLAVE 1 Long Press the <SYNC> button for 2 seconds so that < > is blinking. Turn the continue until the shutter closes or the battery is SET Select Dial until the < > exhausted. The number of flashes will be limited as shown is displayed on the LCD by the following table. panel, which means the master unit. - 39 - - 40 -


Document Created: 2018-07-24 14:52:39
Document Modified: 2018-07-24 14:52:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC