User manual

FCC ID: 2ABYN004

Users Manual

Download: PDF
FCCID_4456054

Flexible LED Light 柔性LED灯 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei FL系列 Model: FL150S Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 FCC ID: 2ABYN004 邮箱/E-mail: godox@godox.com http://www.godox.com 705-FL0000-00 Made In China Chinese English Bilingual | 中英文双语 Instruction Manual | 说明手册

一、前言 三、控制器部件说明 感谢您购买神牛产品！ • 主机 13 柔性LED灯FL系列如软布一样可按需塑形，轻巧便携。亮度、双色温自由调节，适 用于各类拍摄场景。四种型号可选：FL60（30x45cm）、FL100（40x60cm）、 01、机身 12 FL150S（60x60cm）、FL150R（30x120cm）。 02、控制面板 10 产品有以下亮点: 03、开关按键 • 光效均匀柔和，亮度、色温可调 04、组别/频道选择按键 01 • 体积小巧但功率强大，适用于各种狭小空间 05、亮度调节旋钮 • 可按需卷曲成任意形状或多灯拼接使用，打造更多创意光效 03 04 06、色温调节旋钮 • 433MHz无线6组16频道分组控制&手机APP蓝牙无线控制 05 07、电池插槽 • 锂电池供电或DC电源供电 08、电源输入端 06 • 操作简单，轻巧便携 09、输出控制接口 02 10、散热口1 警告 请保持干燥:请勿用湿手接触产品，亦不可将产品浸入水中或暴露于雨中。 11、散热口2 请勿私自拆卸产品，如产品出现故障须由本公司或授权的维修人员进行检查维修。 12、433M控制天线 请勿让儿童接触本产品。 13、蓝牙控制天线 本产品不能防水，在雨天及潮湿环境下请注意防水。 请勿放置在超过50度的高温环境中。 请勿在化学品、可燃性气体或其他特殊物质附近使用闪光灯，这些物质在特殊情况下 09 可能对闪光灯发出的瞬间强光敏感，有可能导致火灾或电磁干扰。在这些场合下，请 注意相关警告标识。 07 08 11 - 01 - - 02 -

四、标配物品 七 、安装 1、柔性布灯 2、控制器 3、电源线 4、适配器 5、RC-A5遥控器 1、打开柔性LED灯和折叠支架，将四根支架分别钩入布灯背面的四角。 6、折叠支架 7、转接座 8、电池扣 9、便携包 (5) (4) (2) 2、将转接座拧上折叠支架，装在灯架上。 (8) (7) (3) (1) (6) (9) 3、将柔性LED灯的端子接入控制盒上部的输出控制接口，适配器的端子接入控制盒下 五、可选购附件 部的电源输入端。 根据布灯型号配合相关尺寸柔光箱 (需另购)使用，拍摄效果更佳。 柔光箱型号： FL-SF3045、FL-SF4060、 FL-SF6060、FL-SF30120 4、使用电源线，连接电源。 六 、布光方式 多灯拼接 随意塑形 - 03 - - 04 -

八、 操作说明 九、无线控制:433MHz无线和手机APP蓝牙无线控制 1、 开关: 1、FL系列柔性LED灯具备无线遥控功能，使用433MHz无线技术，无视角限制，距离 长按控制盒开关按键，LED灯亮，再次长按LED灯灭。 远，可同时分别控制6个LED灯。16组通道频率，抗干扰强。使用前请把LED控制器 和遥控器RC-A5的频道与组别调至一致。 控制器频道/组别调整 • 在常态时，按GR/CH按钮，此时频道闪烁，旋转亮度或色温调节可选择频道(1~16)。 • 在常态时，按GR/CH按钮2次，此时组别闪烁，旋转亮度或色温调节可选择组别(A~F)。 遥控器频道/组别调整 2、无线组别/频道选择: • 在常态时，按CH/GRP按钮，此时组别闪烁，按 "-" "+" 按钮可选择组别(A~F)。 按一下GR/CH按钮，频道值被选中，旋转 • 在常态时，按CH/GRP按钮2次，此时频道闪烁，按 "-" "+" 按钮可选择频道(1~16)。 亮度或色温调节旋钮可调整频道；再次按 % 遥控器亮度/色温参数调节 • 在常态时，按 "-" "+" 按钮可对亮度调整。 GR/CH按钮，组别值被选中，旋转亮度或 色温调节旋钮可调整组别（旋转时组别值 CH • 在常态时，按SET按钮1次，此时色温值闪烁，按 "-" "+" 按钮可对色温调整。 K 循环出现）;再次按GR/CH按钮退出组别频 注: 控制器在开机状态下才可以接收无线信号。 道选择。 2、神牛FL系列柔性LED灯还具备手机APP蓝牙无线控制功能，可同时分别控制6个 LED灯。16组通道频率，抗干扰强。 • 连接蓝牙:在开机状态下，长按GR/CH按钮，控制器会显示蓝牙ID号，打开APP “GodoxPhoto”，点击蓝牙选择控制器对应的蓝牙号，输入密码（原始密码 3、亮度调节: “000000”），蓝牙连接成功。 旋转亮度调节旋钮亮度改变，亮度调节范围10%-100%。 12:00 主页 蓝牙 待连接的设备 搜索设备 GDBA-7FCC 4、色温调节: 旋转色温调节旋钮色温改变，色温调节范围3300K-5600K。 12:00 • LED控制:具体操作请看手机APP 设置 帮助 “GodoxPhoto” : 设置---帮助---LED 欢迎使用神牛Godox PHOTO 请花一些时间阅读介绍界面来了解APP用户界面的使用方法，点击一下文字 标题可以阅读更多信息 用户界面的使用方法 主页面 相机 - 05 - - 06 - 闪光灯 LED 设定

十、产品参数 Foreword 柔性LED灯 FL150S FL150R FL100 FL60 Thank you for purchasing this Godox Product! 供电DC电源供电 AC100V-240V(50/60HZ) FL series Flexible LED Light are suitable for almost all shooting occasions with great portability and easy operation. They are extremely thin and portable like fabric, which can 3.5A(DC16.8V 10A) 3A(DC16.8 7A) 2.5A(DC16.8 4.2A) be folded to different shapes. Four models for choice: FL60(30x45cm), FL100(40x60cm), 锂电池供电 V口电池 FL150S(60x60cm), FL150R(30x120cm). 功率 150W 100W 60W Features: 色温 3300±200K～5600±200K • Soft and even light effects & adjustable light brightness and color temperature. 100%光照度(LUX) ＜4300 Lux ＜3300 Lux ＜1800 Lux • Compact and portable body with strong power. Suitable for lighting in small and narrow 暗室,1m距离 room. TLCI ≥98 • Can be folded to different shapes and used together to achieve creative light effects. CRI ＞96 • Achieving wireless control by 433MHz grouping system(6 groups & 16 channels) and smartphone APP through Bluetooth. 调光范围 10%-100% • Powered by Lithium battery or DC power supply. 工作环境温度 -10°C～45°C • With easy operation,great portability and compatibility. 频道 16个 组别 6组(A、B、C、D、E、F) 无线遥控距离 <30米 Warning 蓝牙距离 <50米 Always keep this product dry. Do not use in rain or in damp conditions. 产品尺寸 60*60cm 30*120cm 40*60cm 30*45cm Do not disassemble. Should repairs become necessary, this product must be sent to 套装重量 3.9kg 4.37kg 3.47kg 2.87kg an authorized maintenance center. *设计和规格如有变更，恕不另行通知。 Keep out of reach of children. As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment. Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result. As this product has built-in lithium battery, do not disassemble, impact, squeeze or put it into fire. If serious bulge occurs, please do not use. Do not use or store the product if the ambient temperature reads over 50℃. Please charge the product with specialized charger and correctly operate it within the defined voltage and working temperate according to the instruction manual. - 07 - - 08 -

Body Included Items 13 1.Flexible LED light 2.Controller 3.Power cord 4.Adapter 5.RC-A5 Remote control 6.Foldable bracket 7.Holder 8.Battery buckle 9.Portable bag 01. Main Body 12 02. Control Panel 03. Power Switch 10 04. Group/Channel Button 05. Select Dial 01 for Light Brightness (5) (4) 06. Select Dial 03 04 (2) for Color Temperature 05 07. Battery Compartment 08. Power Input 06 (8) (7) (3) 09. Output Control Port 02 10. Thermovent 1 (1) (6) 11. Thermovent 2 (9) 12. 433MHz Antenna 13. Bluetooth Antenna Separately Sold Accessories Choose appropriate soft box according to different flexible LED light models. Model: FL-SF3045, FL-SF4060, FL-SF6060, FL-SF30120 09 Using Method 07 08 11 Use in combination Shaping in different form - 09 - - 10 -

Installation Operation 1. Unfold the flexible LED light and stretch the foldable bracket. Then, install the 1. Power on/off: bracket onto the LED light's back. long press the Power Switch to power the LED light on or off. 2. Use a connect holder to install the foldable bracket and flexible LED light on the light stand. 2. Choose group/channel: press GR/CH button for once, and turn the Select Dial for Light Brightness or Color Temperature to change the channel value. % Then, press GR/CH button again, and turn CH the Select Dial for Light Brightness or Color K Temperature to change the group value. 3. Insert the connector of flexible LED light into the Output Control Port (on the top) of Press GR/CH button to exit. the controller while insert the connector of adapter into the Power Input(on the bottom). 3. Light brightness adjustment: turn the select dial for light brightness to 4. Connect the power source with power cord. change the value from 10% to 100%. 4. Color temperature adjustment: turn the select dial for color temperature to change the value from 3300K to 5600K. - 11 - - 12 -

2. Godox FL series flexible LED light can also be controlled by smartphone APP Wireless Control (433MHz wireless & smartphone through Bluetooth with 6 groups and 16 channel. APP through Bluetooth) ▪Bluetooth connection: power the LED light on and long press the GR/CH button 1. With 433 MHz wireless system, this product has remote grouping and control function. until a Bluetooth ID is displayed on the controller. Then, open the Up to 6 groups of flexible LED light can be controlled. 16 channels are available with “GodoxPhoto”APP, click the Bluetooth and choose the corresponding Bluetooth ID strong anti-interference capability. of the controller. Finally, enter the password (the initial password is “000000”), and Please set the channels and groups of flexible LED light to the same as those of RC- the Bluetooth is successfully connected. A5 remote control before usage. Adjusting Channel/Group of the Controller ▪ Press the GR/CH button and the channel icon blinks. Turn the select dial for light 12:00 Home Bluetooth brightness or color temperature to choose a group ID (A to F). Pending connection device Search ▪ Press the GR/CH button twice and the group icon blinks. Turn the select dial for light GDBA-7FCC brightness or color temperature to choose a channel ID (1 to 16). Adjusting Channel/Group of the Remote Control ▪ LED control: please find more details in the “GodoxPhoto” APP of smartphone: ▪ Press the CH/GRP button and the group icon blinks. Press the ”-“ or“+”button to setting---help---LED. choose a group ID (A to F). ▪ Press the CH/GRP button twice and the channel icon blinks. Press the ”-“ or“+”button to choose a channel ID (1 to 16). 12:00 Setting Help Welcome to Use Godox PHOTO Adjusting Light Brightness/Color Temperature with the Remote Control Please take some time to read the interface. Click the totle of the text for more information. ▪ Press the ”-“ or“+”button to adjust the light brightness. Usage of the User InterFace ▪ Press the SET button of the remote control once and the color temperature icon Main Interface Camera blinks. Press the ”-“ or“+”button to adjust the color temperature. Flash LED 设定 Note: The wireless signal can be received only when the controller is power on. - 13 - - 14 -

Technique Data FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the Flexible LED Light FL150S FL150R FL100 FL60 following two conditions: (1) This device may not cause harmful interference, and (2) Power Supply AC100V-240V(50/60HZ) this device must accept any interference received, including interference that may DC Power Supply 3.5A(DC16.8V 10A) 3A(DC16.8 7A) 2.5A(DC16.8 4.2A) cause undesired operation. Lithium Battery V-port battery Power 150W 100W 60W Any Changes or modifications not expressly approved by the party responsible for Color Temperature compliance could void the user's authority to operate the equipment. 3300±200K~5600±200K 100% Light Brightness < 4300 Lux < 3300 Lux < 1800 Lux Note: This equipment has been tested and found to comply with the limits for a Class (LUX)(darkroom, 1m) B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to TLCI ≥ 98 provide reasonable protection against harmful interference in a residential installation. CRI This equipment generates uses and can radiate radio frequency energy and, if not > 96 installed and used in accordance with the instructions, may cause harmful interference Light Brightness Range 10%-100% to radio communications. However, there is no guarantee that interference will not Operation Temperature -10°C~45°C occur in a particular installation. If this equipment does cause harmful interference to Channel 16 radio or television reception, which can be determined by turning the equipment off Group 6 group (A, B, C, D, E, F) and on, the user is encouraged to try to correct the interference by one or more of the Wireless Remote <30m following measures: - Reorient or relocate the receiving antenna. Control Distance - Increase the separation between the equipment and receiver. Bluetooth Distance <50m - Connect the equipment into an outlet on a circuit different from that to which the Dimension 60*60cm 30*120cm 40*60cm 30*45cm receiver is connected. Net Weight (only the 3.9Kg 4.37Kg 3.47Kg 2.87Kg - Consult the dealer or an experienced radio/TV technician for help. main light body) The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. - 15 - - 16 -


Document Created: 2019-05-27 14:49:54
Document Modified: 2019-05-27 14:49:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC