User Manual

FCC ID: 2ABV4SVC680

Users Manual

Download: PDF
FCCID_4065814

Product Overview Location of Controls 1. Incandescent Lamp 2. Lens 3. Microphone 4. ALS- 5. Dingdong Button- 6. Speaker 7. Indicator LED In the BOX ⚫ SVC680-HD Wi-Fi Doorbell(x1)- ⚫ Power Kit(x1)；Cable connectors- ⚫ Mounting Screws(x3) ⚫ Plastic Anchor(x3) ⚫ 3M tape(x1) ⚫ Reset Pin ⚫ Extended Wire(x2) ⚫ Wire connector(x2) ⚫ User Manual(x1） Installing Home Connect 1. Search for HomeConnect on the Apple App Store (for iOS devices) or Google Play Store(for Android devices). Download and install. 2. Launch the HomeConnect account, login, or follow the instructions to create a new account. When creating a new account, an activation email will be sent to you. Some email services will

automatically filter this email into your spam folder, so please check there. Set Up the Doorbell Before powering on and connecting your doorbell, it is important that you choose a suitable location for doorbell where could provide AC power. Mounting the Doorbell When you mount the doorbell, you will need screws and power drill and/ or other special tools to mount the doorbell onto a concrete surface. If the surface is wood or drywall, you will only need a power drill and screwdriver. Please kindly operate it as following steps: 1. Using a pencil, mark two spots 1.75’’ apart. 2. Drill a hold at each marked sport and press the plastic anchors into place. 3. Connecting the AC wires to the power screws on the bottom of doorbell. If the original AC wires on the wall is not long enough, you would use the extended AC wires for connection 4. Please align the doorbell screw hole exactly to the plastic anchors position. Drill or drive the mounting screws into the doorbell screw holes and plastic anchors till secure.- 5. Then put the doorbell housing cover onto the secured doorbell. Drill or drive the screws into the bottom screw hole to fix the doorbell housing. Note: The doorbell could work together with mechanical doorbell. You need install the Sharper Image Power kit on your existing mechanical doorbell,No need diode. Please turn off the power breaker when install the doorbell.

Installing Power Kit( This part is waiting for update--from Sharetronic)- Powering the Doorbell After wiring the doorbell it may take a few minutes before it powers on. Please pay attention to that the doorbell operates on a 16-32VAC. The LED indicator in the mid of incandescent Lamp will turn WHITE. LED Indicator-Doorbell Status(Waiting for FW update--Sharetronic) ⚫ Solid White Doorbell is powered on ⚫ Slowly Flashing White Doorbell is connecting to WiFi ⚫ Quickly Flashing White Doorbell has successfully connected and is now connecting to cloud service ⚫ Solid White Doorbell has successfully connected to Cloud service. Then the LED would turn off after connection. When in night mode, once press the Dingdong button, the incandescent lamp will turn on, in this case you could see the visitor clearly.- Resetting the Doobell It may be necessary or required to reset the doorbell for a number of different reasons, such as when you are connecting to the doorbell for the first time, switching WiFi network the doorbell is connected to, or when deleting the doorbell from an account. To reset the camera, insert the supplied reset pin into the (Reset)hole then press and hold for 6seconds. A voice will be heard indicating that the doorbell has been successfully reset. 。 Note: When resetting the doorbell you will have to reconnect it to your WiFi network. Connecting the Doorbell(Waiting for FW and APP update on it-->Sharetronic)- To setup and use your WiFi Camera, you will need a compatible Android or iOS device, the HomeConnect App, and an 802.11b/g/n 2.4 Ghz Wi-Fi network. Make sure your doorbell is powered on and the HomeConnect app is installed to your phone. 1. Reset the doorbell by inserting the supplied reset pin into the [Reset] hole then press and hold for 6seconds until a voice is heard.

2. Open the HomeConnect app 3. Once the LED indicator is flashing white, press the [+] button on the home screen to add a new device. 4. Follow the instructions on screen to connect your camera.- Please make sure the doorbell is powered on and HomeConnect 5. If you are unable to connect via the above process, tap on the Scan QR Code button in the HomeConnect app and scan the QR code sticker on the underside of the doorbell. If you are STILL unable to connect, check your WiFi settings to make sure the network is a 2.4GHz network and that the WiFi signal is strong at your present location. Reset the Doorbell then repeat the steps above.- FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party.Responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.


Document Created: 2018-11-09 11:59:00
Document Modified: 2018-11-09 11:59:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC