FCC Part15.231 433.92MHz

FCC ID: 2ABUP-FT0317A

Test Report

Download: PDF
FCCID_4498041

Zhejiang Kezheng Electronic Product Inspection Building 5, No. 316, Jianghong South Road Binjiang District, Hangzhou 310052, China TEL: +86-571-88366800 TEST REPORT Report No............................................ : 2019-9064 FCC ID·····································: 2ABUP-FT0317A Applicant................................................: Shenzhen Funpower General Technology Co., Ltd. Address................................................. : Room 201B,Habor Venture Building, No.1041 Houhai Avenue, Shekou,Nanshan District,Shenzhen City,PRC. Manufacturer......................................: Shenzhen Funpower General Technology Co., Ltd. Address..............................................: Room 201B,Habor Venture Building, No.1041 Houhai Avenue, Shekou,Nanshan District,Shenzhen City,PRC. Product Name.....................................: Remote Control Transmitter Trade Mark............................................: N/A Model/Type reference......................... : FT0317A Listed Model(s).....................................: N/A Standard.............................................. : FCC CFR Title 47 Part 15 Subpart C Section 15.231 Date of Receipt.................................... : Sep.16, 2019 Date of Test Date................................. : Sep.16, 2019-Oct.12, 2019 Date of issue.........................................: Oct.12, 2019 Test result...................................... : Pass Compiled by: (Printed name+signature) Liu Wei Supervised by: (Printed name+signature) Chen Yiyun Approved by: (Printed name+signature) Wang Weixiong Testing Laboratory Name............. : Zhejiang Kezheng Electronic Product Inspection Address...............................................: Building 5, No. 316, Jianghong South Road Binjiang District, Hangzhou 310052, China This test report may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by Kezheng. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to Kezheng within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. The test report merely correspond to the test sample.

Page 2 of 21 Report No.: 2019-9064 TABLE OF CONTENTS Page 1. TEST SUMMARY....................................................................................................................................................................... 3 1.1. TEST STANDARDS................................................................................................................................................................... 3 1.2. REPORT VERSION................................................................................................................................................................... 3 1.3. TEST DESCRIPTION................................................................................................................................................................. 4 2.N/A: MEANS THIS TEST ITEM IS NOT APPLICABLE.................................................................................................. 4 1.4. MEASUREMENT UNCERTAINTY................................................................................................................................................. 5 1.5. ENVIRONMENTAL CONDITIONS................................................................................................................................................. 5 2. GENERAL INFORMATION......................................................................................................................................................... 6 2.1. CLIENT INFORMATION............................................................................................................................................................ 6 2.2. GENERAL DESCRIPTION OF EUT...............................................................................................................................................6 2.3. TEST MODE..........................................................................................................................................................................6 2.4. MEASUREMENT INSTRUMENTS LIST...........................................................................................................................................7 2.3. TEST SOFTWARE..................................................................................................................................................................... 7 3. TEST ITEM AND RESULTS..........................................................................................................................................................8 3.1. ANTENNA REQUIREMENT.................................................................................................................................................. 8 3.2. CONDUCTED EMISSION........................................................................................................................................................... 9 3.3. 20DB OCCUPIED BANDWIDTH...............................................................................................................................................10 3.4. DEACTIVATION TIME............................................................................................................................................................ 12 3.5. SPURIOUS EMISSION (RADIATED)............................................................................................................................................14 4. EUT TEST PHOTOS.................................................................................................................................................................. 20 5. PHOTOGRAPHS OF EUT CONSTRUCTIONAL.......................................................................................................................... 21 Zhejiang Kezheng Electronic Product Inspection

Page 3 of 21 Report No.: 2019-9064 1. TEST SUMMARY 1.1. Test Standards The tests were performed according to following standards: FCC Rules Part 15.231: Periodic operation in the band 40.66–40.70 MHz and above 70 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. 1.2. Report version Revised No. Date of issue Description 01 Oct.12, 2019 Original Zhejiang Kezheng Electronic Product Inspection

Page 4 of 21 Report No.: 2019-9064 1.3. Test Description FCC Rules Part 15.231 Standard Section Test Item Result Test Engineer FCC Antenna requirement 15.203 Pass Archer Lin Conducted Emissions 15.207 N/A N/A Radiated Spurious Emissions 15.205/15.209(a)/15.231(b)/15.35(c) Pass Archer Lin Deactivation Time 15.231(a)(1) Pass Archer Lin Duty Cycle 15.231 Pass Archer Lin Occupied Bandwidth 15.231(c) Pass Archer Lin Note: 1. The measurement uncertainty is not included in the test result. 2.N/A: means this test item is not applicable Zhejiang Kezheng Electronic Product Inspection

Page 5 of 21 Report No.: 2019-9064 1.4. Measurement Uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to TR-100028-01” Electromagnetic compatibility and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 1” and TR-100028-02 “Electromagnetic compatibility and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 2 “ and is documented in the Zhejiang Kezheng Electronic Product Inspection quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Below is the best measurement capability for Zhejiang Kezheng Electronic Product Inspection. Test Items Measurement Uncertainty Notes Transmitter power conducted 0.57 dB (1) Transmitter power Radiated 2.20 dB (1) Conducted spurious emission 9KHz-40 GHz 1.60 dB (1) Radiated spurious emission 9KHz-40 GHz 2.20 dB (1) Conducted Emission 9KHz-30MHz 3.23dB (1) Radiated Emission 30~1000MHz 3.36 dB (1) Radiated Emissio 1~18GHz 4.74 dB (1) Radiated Emissio 18-40GHz 5.20 dB (1) Occupied Bandwidth 2.80 dB (1) Note (1): This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=1.96. 1.5. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15~35°C Relative Humidity: 30~60 % Air Pressure: 950~1050mba Zhejiang Kezheng Electronic Product Inspection

Page 6 of 21 Report No.: 2019-9064 2. GENERAL INFORMATION 2.1. Client Information Applicant: Shenzhen Funpower General Technology Co., Ltd. Address: Room 201B,Habor Venture Building, No.1041 Houhai Avenue, Shekou,Nanshan District,Shenzhen City,PRC. Manufacturer: Shenzhen Funpower General Technology Co., Ltd. Address: Room 201B,Habor Venture Building, No.1041 Houhai Avenue, Shekou,Nanshan District,Shenzhen City,PRC. 2.2. General Description of EUT Product Name: Remote Control Transmitter Model/Type reference: FT0317A Trademark: N/A Listed models: N/A Model Difference: N/A Power supply: N/A Power supply(Battery): DC 3V(2x1.5V AAA battery) Hardware version: V1.0 Software version: V1.0 RF Specification Operation frequency: 433.92MHz(433.845MHz-433.995MHz) Modulation Type: ASK Modulation connector: Without external External Occupied bandwidth >25KHz Product type: Wideband deceive Narrowband deceive Channel number: 1 Antenna type: PCB antenna Antenna gain: 10dBi 2.3. Test Mode The EUT was operated at continuous transmitting mode that was for the purpose of the measurements. All testing shall be performed under maximum output power condition, and to measure its highest possible emissions level, more detailed description as follows: Test Mode Description Remark 1 TX DC 3V Zhejiang Kezheng Electronic Product Inspection

Page 7 of 21 Report No.: 2019-9064 2.4. Measurement Instruments List Tonscend JS0806-2 Test system Item Test Equipment Manufacturer Model No. Serial No. Cal. Until 1 Spectrum Analyzer R&S FSV40-N 101798 Sept. 09, 2020 Vector Signal 2 Agilent N5182A MY50142520 Sept. 09, 2020 Generator Analog Signal 3 HP 83752A 3344A00337 Sept. 09, 2020 Generator 4 Power Sensor Agilent E9304A MY50390009 Sept. 09, 2020 5 Power Sensor Agilent E9300A MY41498315 Sept. 09, 2020 Wideband Radio 6 Communication R&S CMU200 115297 Sept. 09, 2020 Tester 7 Climate Chamber Angul AGNH80L 1903042120 Sept. 09, 2020 Dual Output DC 8 Agilent E3646A MY40009992 Sept. 09, 2020 Power Supply 9 RF Control Unit Tonscend JS0806-2 / Sept. 09, 2020 Transmitter spurious emissions & Receiver spurious emissions Item Test Equipment Manufacturer Model No. Serial No. Calibrated until 1 EMI Test Receiver R&S ESR 102525 Sept. 09, 2020 Chengdu 2 High Pass Filter OHF-3-18-S 0E01901038 Sept. 09, 2020 E-Microwave Chengdu 3 High Pass Filter OHF-6.5-18-S 0E01901039 Sept. 09, 2020 E-Microwave 4 Spectrum Analyzer HP 8593E 3831U02087 Sept. 09, 2020 Ultra-Broadband 5 logarithmic period Schwarzbeck VULB 9163 01230 Sept. 09, 2020 Antenna 6 Loop Antenna Beijin ZHINAN ZN30900C 18050 Sept. 09, 2020 7 Horn Antenna R&S Sep-60 69483 Sept. 09, 2020 8 Spectrum Analyzer R&S FSV40-N 101798 Sept. 09, 2020 9 Horn Antenna Schwarzbeck BBHA 9120 D 2023 Sept. 09, 2020 10 Pre-Amplifier Schwarzbeck BBV 9745 9745#129 Sept. 09, 2020 11 Pre-Amplifier EMCI EMC051835SE 980662 Sept. 09, 2020 12 Power Meter Agilent E4419B GB41293710 Sept. 09, 2020 Note: 1)The Cal. Interval was one year. 2)The cable loss has calculated in test result which connection between each test instruments. 2.3. Test Software Software name Model Version Conducted emission Measurement Software EZ-EMC EMC-Con 3A1.1 Radiated emission Measurement Software EZ-EMC FA-03A.2.RE Bluetooth and WIFI Test System JS1120-3 2.5.77.0418 Zhejiang Kezheng Electronic Product Inspection

Page 8 of 21 Report No.: 2019-9064 3. TEST ITEM AND RESULTS 3.1. Antenna requirement Requirement FCC CFR Title 47 Part 15 Subpart C Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. Test Result The directional gain of the antenna less than 6dBi, please refer to the EUT internal photographs antenna photo. Zhejiang Kezheng Electronic Product Inspection

Page 9 of 21 Report No.: 2019-9064 3.2. Conducted Emission Limit Conducted Emission Test Limit Maximum RF Line Voltage (dBV) Frequency Quasi-peak Level Average Level 150kHz~500kHz 66 ~ 56 * 56 ~ 46 * 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Notes: (1) *Decreasing linearly with logarithm of the frequency. (2) The lower limit shall apply at the transition frequencies. (3) The limit decrease in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. Test Configuration Test Procedure 1. The EUT was setup according to ANSI C63.10:2013 requirements. 2. The EUT was placed on a platform of nominal size, 1 m by 1.5 m, raised 80 cm above the conducting ground plane. The vertical conducting plane was located 40 cm to the rear of the EUT. All other surfaces of EUT were at least 80 cm from any other grounded conducting surface. 3. The EUT and simulators are connected to the main power through a line impedances stabilization network (LISN). The LISN provides a 50ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN. (Please refer to the block diagram of the test setup and photographs) 4. Each current-carrying conductor of the EUT power cord, except the ground (safety) conductor, was individually connected through a LISN to the input power source. 5. The excess length of the power cord between the EUT and the LISN receptacle were folded back and forth at the center of the lead to form a bundle not exceeding 40 cm in length. 6. Conducted Emissions were investigated over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9 kHz. 7. During the above scans, the emissions were maximized by cable manipulation. Test Mode: Please refer to the clause 2.3. Test Results Passed Not Applicable Zhejiang Kezheng Electronic Product Inspection

Page 10 of 21 Report No.: 2019-9064 3.3. 20dB Occupied Bandwidth Limit The bandwidth of the emission shall be no wider than 0.25% of the center frequency Test Configuration Test Procedure 1. The transmitter output was connected to the spectrum analyzer through an attenuator, the path loss was compensated to the results for each measurement. 2. Set to the maximum power setting and enable the EUT transmit continuously 3. Use the following spectrum analyzer settings: Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a operation channel RBW≥1% of the 20 dB bandwidth, VBW ≥ RBW Sweep = auto, Detector function = peak, Trace = max hold 4. Measure and record the results in the test report. Test Mode Please refer to the clause 2.3. Test Results Zhejiang Kezheng Electronic Product Inspection

Page 11 of 21 Report No.: 2019-9064 Channel frequency (MHz) 20dB Bandwidth Limit (kHz) (MHz) 433.983 10.85 0.25%*=1.0850 Zhejiang Kezheng Electronic Product Inspection

Page 12 of 21 Report No.: 2019-9064 3.4. Deactivation Time Limit A manually operated transmitter shall employ a switch that will auto-matically deactivate the transmitter within not more than 5 seconds of being released. Test Configuration Test Procedure 1. The transmitter output was connected to the spectrum analyzer through an attenuator, the path loss was compensated to the results for each measurement. 2. Set to the maximum power setting and enable the EUT transmit continuously 3. Use the following spectrum analyzer settings: Frequency=Center carrier frequency RBW=100KHz, VBW=300KHz, Span= 0, Sweep time= 10 second, Detector function = peak, Trace = single 4. Measure and record the results in the test report. Test Mode Please refer to the clause 2.3. Test Results Zhejiang Kezheng Electronic Product Inspection

Page 13 of 21 Report No.: 2019-9064 Channel frequency (MHz) One transmission Limit (second) time (second) 433.893 0.5942 5 Zhejiang Kezheng Electronic Product Inspection

Page 14 of 21 Report No.: 2019-9064 3.5. Spurious Emission (radiated) Limit FCC CFR Title 47 Part 15 Subpart C Section 15.209 Radiated Emission Limits (9 kHz~1000 MHz) Frequency Field Strength Measurement Distance (MHz) (microvolt/meter) (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 The field strength of emissions from intentional radiators operated average value under this section shall not exceed the following Field strength of fundamental Field strength of harmonics Fundamental frequency (millivolts/meter) (microvolts/meter) 260 - 470 MHz 3,750 to 12,500 ** 375 to 1,250 ** ** linear interpolations F is 433.983MHz Field strength of fundamental: μV/m at 3 meters = 41.6667(F) - 7083.3420 Field strength of harmonics: μV/m at 3 meters = 4.16667(F) - 708.3342 Test Configuration Below 30MHz Test Setup Zhejiang Kezheng Electronic Product Inspection

Page 15 of 21 Report No.: 2019-9064 Below 1000MHz Test Setup Above 1GHz Test Setup Test Procedure 1. The EUT was setup and tested according to ANSI C63.10:2013 2. The EUT is placed on a turn table which is 0.8 meter above ground for below 1 GHz, and 1.5 m for above 1 GHz. The turn table is rotated 360 degrees to determine the position of the maximum emission level. 3. The EUT was set 3 meters from the receiving antenna, which was mounted on the top of a variable height antenna tower. 4. For each suspected emission, the EUT was arranged to its worst case and then tune the Antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high pass filter are used for the test in order to get better signal level to comply with the guidelines. 5. Set to the maximum power setting and enable the EUT transmit continuously. 6. Use the following spectrum analyzer settings (1) Span shall wide enough to fully capture the emission being measured; (2) Below 1 GHz: RBW=120 kHz, VBW=300 kHz, Sweep=auto, Detector function=peak, Trace=max hold; If the emission level of the EUT measured by the peak detector is 3 dB lower than the applicable limit, the peak emission level will be reported. Otherwise, the emission measurement will be repeated using the quasi-peak detector and reported. (3) From 1 GHz to 10th harmonic: RBW=1MHz, VBW=3MHz Peak detector for Peak value. RBW=1MHz, VBW=10Hz RMS detector for Average value. Zhejiang Kezheng Electronic Product Inspection

Page 16 of 21 Report No.: 2019-9064 Test Mode Please refer to the clause 2.3. Test Result 9 KHz~30 MHz , 30MHz-1GHz and 1GHz~6GHz From 9 KHz~30 MHz, 30MHz-1GHz and 1GHz~6GHz: Conclusion: PASS Note: 1) Final level = Reading level + Correct Factor Correct Factor=Antenna Factor + Cable Loss -Preamplifier Factor 2) The emission levels of other frequencies are very lower than the limit and not show in test report. 3) The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Frequency Transmission Limit: not more than 5 seconds of Conclusion (MHz) cease Time being released (s) (s) 433.983 0.5942 5 PASS Ton (ms) Ton+Toff (ms) 14*0.8841+27*(1.4783-1.1884)=20.2047 53.333 Duty cycle factor (dB)= 20log (Ton / (Ton + Toff)) (dB) = -8.43(dB) Zhejiang Kezheng Electronic Product Inspection

Page 17 of 21 Report No.: 2019-9064 Pulse 1 Ton + Toff Zhejiang Kezheng Electronic Product Inspection

Page 18 of 21 Report No.: 2019-9064  30MHz~ 1000MHz Test Channel 433.983MHz Correct Final Frequency Reading Limit Line Margin Factor level Polarization Test value (MHz) Level (dBuV) (dBuV/m) Limit (dB) (dB/m) (dBuV/m) 102.0729 25.63 -16.12 9.51 43.50 -33.99 Vertical QP 217.0110 30.82 -16.23 14.59 46.00 -31.41 Vertical QP 325.4817 31.12 -13.19 17.93 46.00 -28.07 Vertical QP 433.9830 93.15 -10.15 83.00 100.83 -17.83 Vertical Peak 663.4729 25.36 -7.86 17.50 46.00 -28.50 Vertical QP 868.2164 35.78 -5.03 30.75 80.83 -50.08 Vertical Peak 217.0110 38.20 -17.22 20.98 46.00 -25.02 Horizontal QP 325.4817 48.89 -14.69 34.20 46.00 -11.80 Horizontal QP 379.7810 31.70 -12.83 18.87 46.00 -27.13 Horizontal QP 420.4329 46.00 -12.47 33.53 46.00 -12.47 Horizontal QP 433.9830 97.94 -12.57 85.37 100.83 -15.46 Horizontal Peak 868.2164 49.62 -7.87 41.75 80.83 -39.08 Horizontal Peak Frequency Peak Level Duty cycle AV Level FCC Limit Margin (dB) Polarization (MHz) (dBuV/m) factor(dB) (dBuV/m) (dBμV/m) 433.9830 83.00 -8.43 74.57 80.83 -6.26 Vertical 868.2164 30.75 -8.43 22.32 60.83 -38.51 Vertical 433.9830 78.94 -8.43 70.51 80.83 -10.32 Horizontal 868.2164 56.23 -8.43 47.8 60.83 -13.03 Horizontal Note:Duty cycle factor = 20log (Duty cycle),Duty cycle = Ton / (Ton + Toff) Zhejiang Kezheng Electronic Product Inspection

Page 19 of 21 Report No.: 2019-9064  1GHz~ 6GHz Test Channel 433.983MHz Reading Correct Frequency Final level Limit Line Margin Level Factor Polarization Test value (MHz) (dBuV/m) (dBuV/m) Limit (dB) (dBuV) (dB/m) 1302.400 57.61 -17.70 39.91 74.00 -34.09 Vertical 1736.800 62.76 -16.44 46.32 74.00 -27.68 Vertical 2170.000 62.85 -15.53 47.32 74.00 -26.68 Vertical 2603.600 66.01 -14.95 51.06 74.00 -22.94 Vertical 3037.600 63.09 -14.41 48.68 74.00 -25.32 Vertical 3472.000 56.66 -13.22 43.44 74.00 -30.56 Vertical Peak 1302.000 56.01 -17.70 38.31 74.00 -35.69 Horizontal 1736.800 52.82 -16.44 36.38 74.00 -37.62 Horizontal 2169.600 54.83 -15.53 39.30 74.00 -34.70 Horizontal 2604.000 61.58 -14.95 46.63 74.00 -27.37 Horizontal 3038.000 58.22 -14.40 43.82 74.00 -30.18 Horizontal 3906.000 52.42 -12.02 40.40 74.00 -33.60 Horizontal Frequency Peak Level Duty cycle AV Level FCC Limit Margin (dB) Polarization (MHz) (dBuV/m) factor (dBuV/m) (dBμV/m) 1302.400 39.91 -8.43 31.48 60.83 -29.35 Vertical 1736.800 46.32 -8.43 37.89 60.83 -22.94 Vertical 2170.000 47.32 -8.43 38.89 60.83 -21.94 Vertical 2603.600 51.06 -8.43 42.63 60.83 -18.20 Vertical 3037.600 48.68 -8.43 40.25 60.83 -20.58 Vertical 3472.000 43.44 -8.43 35.01 60.83 -25.82 Vertical 1302.000 38.31 -8.43 29.88 60.83 -30.95 Horizontal 1736.800 36.38 -8.43 27.95 60.83 -32.88 Horizontal 2169.600 39.30 -8.43 30.87 60.83 -29.96 Horizontal 2604.000 46.63 -8.43 38.20 60.83 -22.63 Horizontal 3038.000 43.82 -8.43 35.39 60.83 -25.44 Horizontal 3906.000 40.40 -8.43 31.97 60.83 -28.86 Horizontal Note:Duty cycle factor = 20log (Duty cycle),Duty cycle = Ton / (Ton + Toff) Zhejiang Kezheng Electronic Product Inspection

Page 20 of 21 Report No.: 2019-9064 4.EUT TEST PHOTOS Reference to the document No.: Test Photos. Zhejiang Kezheng Electronic Product Inspection

Page 21 of 21 Report No.: 2019-9064 5. PHOTOGRAPHS OF EUT CONSTRUCTIONAL Reference to the document No.: External Photos and Internal Photos. **********************THE END********************** Zhejiang Kezheng Electronic Product Inspection


Document Created: 2019-10-31 23:49:34
Document Modified: 2019-10-31 23:49:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC