User Manual Part 2

FCC ID: 2ABUBSPH6015

Users Manual

Download: PDF
FCCID_3103994

x Scan Information To access this item, press the [MenuJ©key in idle mode and You can read the information of this device under this option, then select "Scan". such as ID, frequency range, version information etc. M Scan on/off The function "Scan" allows you to listen to communication ac— tivities on other channels so that you can keep a close track of your team members. This option is used to enable or disable the function. m Scan list You can request your dealer to create a scan list for each chan— nel. Each list may contain 32 channels at most (either digital channel or analog channel is OK). After accessing the list, you can perform any of the following operations: Adding a channel To include a new channel into the active scan list. Editing priority channel To set the selected channel as a non—priarity or as a priority channel. If you are interested in activities on a channel, you can set It as a priority channel, which will be scanned more frequently than a non—priority channel. Deleting a channel To remove a channel from the active scan list. However, the first channel in thelist can not be deleted. 16




5.The fault or damage to the antenna is not caused by the Appendix: Input Method materials or processing. You can enter aliases, numbers or messages using the keypad. 6.The related marks on the radio are torn up or erased, the This radio supports the following input methods: Chinese Pinyin serial number can not be identified. (simplified) , English ("ABC"/ "abc") and Number("123"). 7.The products whose purchase date cannot be identified. 8.The malfunction or damage caused by the force majeure. 9.The normal abrasion. Switching input method 10.The battery with following circumstance: Press (*+) key to switch to desired input method. The symbol is a.Artificially damaged or opened. displayed on the upper right corner of the LCD. b.Use the abnormal equipment to make a battery charging. Chinese Pinyin (Simplified) Special note: 1. Enter the Pinyin through alphanumeric keys; then a list of 1.Within the limits of law, in any case, Samhoo has no liability possible combinations and corresponding characters will for the loss that is more than the product purchase price, mean— appear. while, Samhoo is notliable for any loss of use, loss of time, loss 2.Use (0 / ®) key to choose the right pinyin. of business, loss of profits or income, and the incidental, special 3.Press (=) key to highlight the characters, and choose or secondary damage. the right character using C / > key. 2.Since the environment orsystem ofusing the productare 4.Press (—) key to enter the selected character. different. Samhoois not responsible for the coverage area of the whole system or the operation conditions. Capital letter/small letter 3. The maintenance clauses are enacted in accordance with relevant English letters have been labeled on the number key, you just national warranty regulations. Due to the technical development and need to repeatedly fast press the corresponding number key market adjustment, the clauses will be changed accordingly. The until the desired letter appear. If the next input letter and the specific changes are subject to Change Notice issued by samhoo current input letter are on the same key, please wait for the customer service center. For other matters not mentioned here, will current letter to be confirmed before entering the next letter. be subject to relevant national regulations. 20

Number Number 0—9 are labeled on the keys, you just need to press the number keys to Input the corresponding number. Punctuation Under Pinyin Input method and letter Input method, press 1)—) keyto input punctuation. Under number input method, you can not input punctuation. Inputspace Under letter/numberinput method, long press (x=) key to input space and short press to Input *. Under Pinyin input method, please press (1< ) key, select space in the punctuation interface. D Note:Short press (——) key to delete the entered characters one by one and long press to delete all the entered characters. 21


RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use Notice: this radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. Federal Communication Commission (FCC) Regulations When Digital Two-Way Radiois used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirement. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Digital Two-Way Radio has a RF Exposure Product Label. Also, your Digital Two-Way Radio user manual includes information and operating instructions required to control your RF exposure and satisfy compliance requirements. Compliance with RF Exposure Standards Your Digital Two-Way Radio is designed and tested to compliance with a number of national and international standards and guidelines for human exposure to radio frequency electromagnetic energy. This radio compliance with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk ʹ 50% listen and is approved for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measureable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. Your Digital Two-Way Radio complies with the following RF energy exposure standards and guidelines: ƽ United States Federal Communications Commission (FCC), Code of Federal Regulations; ƽ Institute of Electrical and Electronic Engineers (IEEE) C95.1 ƽ International Commission on Non-lionizing Radiation Protection (ICNIRP) RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures; ƽ DO NOT remove the RF Exposure Label from the device ƽ User awareness instructions should accompany device when transferred to other users. 23

Operational Instructions and Training Guidelines To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures; ƽ In front of the face, hold the radio in a vertical position with microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keep the radio at a proper distance is important to ensure compliance. Note: RF exposure decrease with increasing distance from the antenna. ƽ Body Worn Operation; when worn the body, always place the radio in an approved clip, holder, or body harness for this product. Using approved body-worn accessories is important because the use of non-approved accessories may results in exposure levels, which exceed the occupational/controlled environment RF exposure limits Using only approved supplied or replacement antennas, batteries, and audio accessories, use of non-approved antennas, batteries, and wired or wireless accessories may exceed the applicable RF exposure guidelines (IEEE, ICNIRP or FCC). 24



Document Created: 2016-06-15 16:47:46
Document Modified: 2016-06-15 16:47:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC