RF Exposure

FCC ID: 2ABTU-RSKUHF01

RF Exposure Info

Download: PDF
FCCID_4288675

Report No.: 18C0314R—SAUSPO3V00 5> DEKRA RF Exposure Evaluation Report Product Name : UHF RFID Reader Module Model No. : RSK—UHFOLI FCCID : 2ABTU—RSKUHFOL Applicant : RuggON Corporation Address _: 4F, No. 298, Yang Guang St., Neihu Dist., Taipei City, Taiwan Date of Receipt Dec. 24, 2018 Date of Declaration : Feb. 25, 2019 Report No. 18CO314R—SAUSPO3V00 Report Version v1.O The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency ofthe government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Page: 1 of 3

Report No.: 18C0314R-SAUSP03V00 Issued Date: Feb. 25, 2019 Report No.: 18C0314R-SAUSP03V00 Product Name UHF RFID Reader Module Applicant RuggON Corporation Address 4F, No. 298, Yang Guang St., Neihu Dist., Taipei City, Taiwan Manufacturer RuggON Corporation Model No. RSK-UHF01 FCC ID. 2ABTU-RSKUHF01 Trade Name RuggON Applicable Standard FCC 47 CFR 1.1307 KDB 447498 D01 v06 Test Result Complied Documented By : ( Adm. Assistant / Elephant Chen ) Tested By : ( Engineer / Wen Lee ) Approved By : ( Director / Vincent Lin ) Page: 2 of 3

Report No.: 18C0314R—SAUSPO3V00 5> DEKRA 1. GENERAL INFORMATION 1.1. EUT Description Product Name UHF RFID Reader Module Trade Name RuggON Model No. RSK—UHFOI FCC ID. 2ABTU—RSKUHFO1 Frequency Range 902. 75MHz—927.25MHz Channel Control Auto Type of Modulation FSK Antenna Type [Patch Antenna 2. RF Exposure Evaluation 2.1. Standard Applicable According to 1.1307 (b)(1). systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess ofthe Commission‘s guideline. 2.2. Measurement Result: According to KDB Publication 447498 DO1, section 4.3.1, per the calculations of item 1 (Power(mW)/separation (mm)*sqrt(f(GHz)=3.0), SAR is required as shown in the table below where calculated values are greater than 3.0: 1.) Operation frequency = 900MHz and antenna separation distance = Smm, SAR Test Exclusion Threshold = 16mW SAR Test Frequency Band Maximum H—Field power . Calculated Threshold Value Exclusion Threshold (MHz) (£3.0 SAR is not required) (dBuV/3m) ERP (mmwW) (mwW) 914.75 93.25 0.39 16 0.074 Note1: The SAR/MPE measurement is not necessary. Note2: The Maximum H—Field power is refer to report No.: 18CO314R—RFUSP66V00 from the DKERA. Page: 3 of 3


Document Created: 2019-03-20 11:32:28
Document Modified: 2019-03-20 11:32:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC