User manual

FCC ID: 2ABQZ-XR301BT

Users Manual

Download: PDF
FCCID_2852707



To turn off the unit press power button once.The unit can power on without ACC power, and will automatically power off after 60 minutes. Press once to automatically


In CD/USB/SD mode, press the D- button to display the previous folder. In CD/USB/SD mode, press the D+ button to display the next folder.

Bluetooth Pairing 1. Enable Bluetooth on your device. 2. Scan for available devices. 3. "CAR KIT" or similar will appear. Select "Car Kit". 4. Enter the Code: 0000 Once paired you can receive calls and play music via Bluetooth. 4x25W RMS

Trouble Shooting Problem Cause Solution Unit will not furn on Yellow wire not connected or incorrect voltage Check connections {no power) Red wire not connected or incorrect voltage for proper voltage {11—14.4VDBC} Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has power Spesaker wires not connected Check connections {but no sound) at speakers GOne or more speaker wires touching each insulate all bare speaker other or touching chassis ground wires from each other and chassis ground Unit blows fuses Yellow or red wire touching chassis ground Check for pinched wire Speaker wires touching chassis ground Check for pinched wire Incorrect fuse rating Use fuse with correct rating Excessive skipping Unit is not mounted correcifly Check mounting sleeve and or back strap is not secure back strap suppoit FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2015-11-26 10:02:07
Document Modified: 2015-11-26 10:02:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC