SAR report part 3

FCC ID: 2ABQ6-K10

RF Exposure Info

Download: PDF
FCCID_4384707

C mm i3 h . \\\‘\ iamsCNAS 3 l4'\\ y : Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China CALIBRATION Af f.\\“\\ CNAS LO570 Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 Thb E—mail: cttl@chinattl.com Hitp://www.chinattl.en Client : HTW Certificate No: Z219—60066 CALIBRATION CERTIFICATE Object DAE4 — SN: 1549 Calibration Procedure(s) EF—211—002—01 Calibration Procedure for the Data Acquisition Electronics (DAEX) Calibration date: March 19, 2019 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)°c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards | ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Process Calibrator 753 1971018 20—Jun—18 (CTTL, No.J18X05034) June—19 | Name Function Signamm’ Calibrated by: Yu Zongying SAR Test Engineer \% * Reviewed by: Lin Hao SAR Test Engineer 1'}3(’?% Approved by: Qi Dianyuan SAR Project Leader éw-@\:/ Issued: March 20, 2019 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: Z19—60066 Page 1 of 3

fi ;Cou.abomnonewtm § Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: ettl@chinattl.com Hitp://www.chinattl.en Glossary: DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters: e DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. & Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. & The report provide only calibration results for DAE, it does not contain other performance test results. Certificate No: Z19—60066 Page 2 of 3

aTTi ©"&"«"a a Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.n DC Voltage Measurement A/D — Converter Resolution nominal High Range: 1LSB = 6.1uV , full range = —100...+300 mV Low Range: 1LSB= 61nV , full range = ~1. +3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors X Y Z High Range 406.354 + 0.15%(k=2) 406.056 + 0.15% (k=2) 406.182 + 0.15% (k=2) Low Range 3.98644 + 0.7% (k=2) 3.99365 +0.7% (k=2) 3.99469 + 0.7% (k=2) Connector Angle Connector Angle to be used in DASY system 189°44" Certificate No: Z19—60066 Page 3 of 3

. o «U3 tBLT> in Collaboration with §2_ A @7J a jsex@k CNASE:" /Ry v CALIBRATION Add: No.51 Xueyuan Road, Haidian District, Beijing. 100191, China '/ul..l..\\\\ CNAS LO570 Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: ettl@chinattl.com Hitp://wwsw.chinattl.on Client HTW Certificate No: Z19—60065 CALIBRATION CERTIFICATE Object EX3DV4 — SN:7494 Calibration Procedure(s) FF—211—004—01 Calibration Procedures for Dosimetric E—field Probes Calibration date: March 25, 2019 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)‘c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 20—Jun—18 (CTTL, No.J18X05032) Jun—19 Power sensor NRP—Z91 101547 20—Jun—18 (CTTL, No.J18X05032) Jun—19 Power sensor NRP—Z91 101548 20—Jun—18 (CTTL, No.J18X05032) Jun—19 Reference10dBAttenuator 18N50W—10d4B 09—Feb—18(CTTL, No.J18X01133) Feb—20 Reference20dBAttenuator 18N50W—20dB 09—Feb—18(CTTL, No.J18X01132) Feb—20 Reference Probe EX3DV4 SN 7514 27—Aug—18(SPEAG,No.EX3—7514_Aug18/2) Aug—19 DAE4 SN 1555 20—Aug—18(SPEAG, No.DAE4—1555_Aug18) Aug —19 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration SignalGeneratorMG3700A 6201052605 21—Jun—18 (CTTL, No.J18X05033) Jun—19 Network Analyzer E5071C MY46110673 24—Jan—19 (CTTL, No.J19X00547) Jan —20 Name Function Signature Calibrated by: Yu Zongying SAR Test Engineer hy “% Reviewed by: Lin Hao SAR Test Engineer a. ;fif;,y‘{,y_;- Approved 53: Qi Dianyuan SAR Project Leader e2 Issued: March 27, 2019 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z19—60065 Page 1 of 11

filn(fioflmmm s p e a g \iaaazy»>" CALIGRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Glossary: TSL tissue simulating liquid NORMx,y,z sensitivity in free space ConvF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A,B,C,D modulation dependentlinearization parameters Polarization ® ® rotation around probe axis Polarization 0 8 rotation around an axis that is in the plane normal to probe axis (at measurementcenter), i 6=0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: e NORMx,y,z: Assessed for E—field polarization 0=0 (fs900MHz in TEM—cell; f>1800MHz: waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not effect the E" —field uncertainty inside TSL (see below ConvF). e NORM(M)x,y,2 = NORMx,y,z* frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. e DCPx,y,2: DCP are numerical linearization parameters assessed based on the data of power sweep (no uncertainty required). DCP does not depend on frequency nor media. e PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics. e Axy2; Bxyz; Cxy,z;VRx,y,z:A,B,C are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. e ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for fs800MHz) and inside waveguide using analytical field distributions based on power measurements for f >800MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty valued are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z* ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from+50MHz to+100MHz. e Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. e Sensor Offset: The sensoroffset corresponds to the offset ofvirtual measurement center from the probe tip (on probe axis). No tolerance required. e Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: Z19—60065 Page 2 of 11

e© \., Collsinoration with @77], a ie CAUSRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hetp://www.chinattl.en Probe EX3DV4 SN: 7494 Calibrated: March 25, 2019 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: Z19—60065 Page 3 of 11

e® in Collsiboration with @77J, a ~iigggy»"" CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: ettl@chinattl.com Hup:!/www.chinattl.en DASY/EASY — Parameters of Probe: EX3DV4 — SN: 7494 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm(pV/(V/im)?) 0.40 0.47 0.40 £10.0% DCP(mV)® 97.1 100.4 98.3 Modulation Calibration Parameters uiD Communication A B C D VR Unc ® System Name dB dByuV dB mV (k=2) 0 Cw x 0.0 0.0 1.0 0.00 151.5 £2.8% ¥ 0.0 0.0 1.0 167.5 Z 0.0 0.0 1.0 150.7 The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probatbility of approximately 95%. A The uncertainties of Norm X, Y, Z do not affect the E*—field uncertainty inside TSL (see Page 5 and Page6). ® Numerical linearization parameter: uncertainty not required. & Uncertainly is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: Z19—60065 Page 4 of 11

h* in Colleboration with e=‘["[‘J sa e a Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hup://www.chinattl.en DASY/EASY — Parameters of Probe: EX3DV4 — SN: 7494 Calibration Parameter Determined in Head Tissue Simulating Media j ivi 6 f [MHz]® Pe::ll::\‘:liy" °°"'::7:|‘)":" ConvF X ConvF Y ConvF Z Alpha$ D(::::; :::;t) 750 a1.9 0.89 1074 1074 1074 023 110 £121% 835 41.5 0.90 i1041 1041 1041 012 150 £121% 1750 401 1.37 8.91 8.91 891 025 096 £121% 1900 40.0 1.40 857 857 857 027 094 £121% 2300 395 1.67 822 822 822 049 073 1121% 2450 39.2 1.80 T9o 790 790 051 075 +121% 2600 39.0 1.96 T69 769 769 045 083 +121% 5200 36.0 4.66 556 556 556 040 1.50 £133% 5300 35.9 4.76 537 537 537 040 140 +133% 5500 35.6 4.96 5oo 500 500 0.40 1.35 £13.3% 5600 355 5.07 aBo 489 489 040 150 £133% 5800 35.3 5.27 aB5 485 4850 0.40 145 £13.3% © Frequency validity above 300 MHz of £100MHz only applies for DASY v4.4 and higher (Page 2), else it is restricted to #50MHz. The uncertainty is the RSS of ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to £ 110 MHz. F At frequency below 3 GHz, the validity of tissue parameters (e and 0) can be relaxed to +10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and 0) is restricted to £5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. ©Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for the frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: Z19—60065 Page 5 of 11

se* in Collsboration with a=x‘7"[‘J, a lizzzye»" CALIBRATION LARORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: ettl@chinattl.com Hitp://www.chinattl.en DASY/EASY — Parameters of Probe: EX3DV4 — SN: 7494 Calibration Parameter Determined in Body Tissue Simulating Media — _ 5 f [MHz]® Pe:‘:";:l"‘l’;w °°"‘:;7:|‘)":V ConvF X ConvF Y ConvF Z Alpha® '3(:"::‘) ::(’:; 750 555 0.96 i081 i1081 1081 040 0.80 £121% 835 55.2 0.97 1046 1046 1046 019 131 £121% 1750 534 1.49 8.51 8.51 851 020 107 £121% 1900 53.3 1.52 8.38 8.38 838 019 114 £121% 2300 52.9 1.81 8.04 8.04 804 045 088 £121% 2450 52.7 1.95 8.00 8.00 800 053 0.78 £121% 2600 525 216 7.69 7.69 76e o63 070 +121% 5200 49.0 5.30 511 511 511 042 1.80 +133% 5300 48.9 5.42 4.89 4.89 489 0.45 165 £133% 5500 48.6 5.65 4.55 4.55 455 0.45 1.65 +133% 5600 48.5 5.77 445 445 445 045 150 £133% 5800 48.2 6.00 4.50 4.50 450 0.50 145 £133% © Frequency validity above 300 MHz of £100MHz only applies for DASY v4.4 and higher (Page 2), else it is restricted to #50MHz. The uncertainty is the RSS of ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to £ 110 MHz. " At frequency below 3 GHz, the validity of tissue parameters (e and 0) can be relaxed to £10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and 0)is restricted to £5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. ©Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for the frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: Z19—60065 Page 6 of 11

ETTL e s va e lizazzyy»" CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: ettl@chinattl.com Http://www.chinattl.en Frequency Response of E—Field (TEM—Cell: ifi110 EXX, Waveguide: R22) Frequency response (normallzed) 0.5 f—_—_}__$ T t T t t ° I + o 500 1000 1500 2000 2500 3000 [Fe— f [MHz] —#— TEM R22 Uncertainty of Frequency Response of E—field: £7.4% (k=2) Certificate No: Z19—60065 Page 7 of 11

* n Collsboration with a=‘/"]["J, a seeat e _a Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Receiving Pattern (®), 0=0° £=600 MHz, TEM £=1800 MHz, R22 iD tRA S t MEAAAE \ oty mWEXT 2 Je3 ere. t, imI C A2 ) | -!',,’7//1.\ \\\\5, Error{dB] . Roll®1 [Z+1100MHz * — 600MHz *+— 1800MHz __—*— 2500MHz] Uncertainty of Axial Isotropy Assessment: £1.2% (k=2) Certificate No: Z19—60065 Page 8 of 11

7TL s"a" s cxumanow tanoekrory Add: No 1 XucanRoad,sitan Disvict Biing.10012,China Te onsiosmomssasi rcaeloandicnass E—mail ibchinatlcom oitmnctinatisn Dynamic Range f(SARnead) (TEM cell, f= 900 MHz) t 10° 10 10‘ 10 SAR(mW/om‘] EWJretcompensaied #— conpensane 1st 10‘ 18 io l 18 SARJmWiem —#—Inot compensated —+— compensated Uncertainty of Linearity Assessment: 20.9% (k=2) Cenificate No: Z19—6006$ Page s of i1

@77L a f——3 s e e a Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: ettl@chinattl.com Hitp://www.chinattl.en Conversion Factor Assessment f=750 MHz, WGLS R9(H_convF) f=1750 MHz, WGLS R22(H_convF) 350 ———'—v— 30.00 | 300 %:: X | 2000 ‘X $ é‘ s \ | | éw.oo & $ . : | 0.50 \ 1 500 o.00 5____4‘ 000 \ 0 20 «0 so so 100 00 e ze sn 4o se sn o zmm zmm] Deviation from"lmgg__trgpy in Liquid 1.0 0.8 0.6 0.4 0.2 7z Axis 0.0 —0.2 —0.4 —0.6 —0.8 ~1 _8 —10 080 060 040 oz 0 020 o40 o%0 08 10 Uncertainty of Spherical Isotropy Assessment: £3.2% (K=2) Certificate No: Z19—60065 Page 10 of 11

e® |n Collsboration with «7/ a n ummoueumanm Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.cn DASY/EASY — Parameters of Probe: EX3DV4 — SN: 7494 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) 22.4 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disable Probe Overall Length 337mm Probe Body Diameter 10mm Tip Length 9mm Tip Diameter 2.5mm Probe Tip to Sensor X Calibration Point 1mm Probe Tip to Sensor Y Calibration Point 1mm Probe Tip to Sensor Z Calibration Point 1mm Recommended Measurement Distance from Surface 1.4mm Certificate No: Z19—60065 Page 11 of 11


Document Created: 2019-04-15 13:38:21
Document Modified: 2019-04-15 13:38:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC