Test Report

FCC ID: 2ABOSSKYPLA60P

Test Report

Download: PDF
FCCID_2956606

Shenzhen SEM.Test Technology Co., Ltd. FCC Part 15B Measurement and Test Report For Sky Phone LLC 1348 Washington Av.Suite 350 Miami Beach, FL 33139 FCC ID: 2ABOSSKYPLA60P Test Rule(s): FCC Part 15 Subpart B Product Description: Smart phone Tested Model: Platinum 6.0+ Report No.: STR16028063I-1 Tested Date: 2016-02-27 to 2016-03-08 Issued Date: 2016-03-09 Tested By: Lucy Wei / Engineer Reviewed By: Silin Chen / EMC Manager Approved & Authorized By: Jandy So / PSQ Manager Prepared By: Shenzhen SEM.Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM.Test Technology Co., Ltd. REPORT NO.: STR16028063I-1 PAGE 1 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY .............................................................................................................................................4 1.4 TEST FACILITY .......................................................................................................................................................4 1.5 EUT SETUP AND OPERATION MODE ......................................................................................................................5 1.6 MEASUREMENT UNCERTAINTY ..............................................................................................................................5 1.7 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................6 2. SUMMARY OF TEST RESULTS ...........................................................................................................................7 3. CONDUCTED EMISSIONS ....................................................................................................................................8 3.1 TEST PROCEDURE ...................................................................................................................................................8 3.2 BASIC TEST SETUP BLOCK DIAGRAM.....................................................................................................................8 3.3 ENVIRONMENTAL CONDITIONS ..............................................................................................................................9 3.4 SUMMARY OF TEST RESULTS/PLOTS ......................................................................................................................9 3.5 CONDUCTED EMISSIONS TEST DATA ......................................................................................................................9 4. RADIATED EMISSIONS .......................................................................................................................................14 4.1 TEST PROCEDURE .................................................................................................................................................14 4.2 TEST RECEIVER SETUP .........................................................................................................................................15 4.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................15 4.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................15 4.5 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................15 REPORT NO.: STR16028063I-1 PAGE 2 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: Sky Phone LLC Address of applicant: 1348 Washington Av.Suite 350 Miami Beach, FL 33139 Manufacturer: Shenzhen Tablet Electronics Limited Address of manufacturer: 2F, B5b Building, Yingzhan Industrial Zone, Longtian Community, Kengzi Street, Longgang, Shenzhen, China General Description of EUT Product Name: Smart phone Brand Name: SKY Model No.: Platinum 6.0+ Adding Model No.: PQ60 WTA0501000USA1 Adapter Model: INPUT:100-240V,50/60Hz,0.3A; OUTPUT:DC5V,1A Hardware version: WW816_MB_V8.0 Software version: Sky_Platinum 6.0+_SW_VN_V06_20160127 Device Category: Portable Device The EUT Main board support GSM850/900/DCS1800/PCS1900, WCDMA Band 2/4/5 function. It is intended for speech, Multimedia Message Service (MMS) transmission. It is equipped with GPRS class 12 for GSM850/900/DCS1800/PCS1900, GPS, FM, Bluetooth and Wi-Fi functions. For more information see the following datasheet Note: The test data is gathered from a production sample provided by the manufacturer. The appearance of others models listed in the report is different from main-test model Platinum 6.0+, but the circuit and the electronic construction do not change, declared by the manufacturer. Technical Characteristics of EUT Rated Voltage: DC 3.8V Battery Capacity: 2800mAh Rated Power: / Lowest Internal Frequency: 26MHz Highest Internal Frequency: 1.3GHz Classification of ITE: Class B REPORT NO.: STR16028063I-1 PAGE 3 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 1.2 Test Standards The following report is prepared on behalf of the Sky Phone LLC in accordance with Part 2, Subpart J, and Part 15, Subparts A and B of the Federal Communication Commissions rules. The objective is to determine compliance with FCC Part 15, Subpart B, and section 15.205, 15.107, and 15.109 rules. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. 1.4 Test Facility  FCC – Registration No.: 934118 Shenzhen SEM.Test Technology Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files and the Registration is 934118.  Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM.Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A.  CNAS Registration No.: L4062 Shenzhen SEM.Test Technology Co., Ltd. is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L4062. All measurement facilities used to collect the measurement data are located at 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C (518101) REPORT NO.: STR16028063I-1 PAGE 4 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 1.5 EUT Setup and Operation Mode The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted according to the operation manual for use, more detailed description as follows: Test Mode List: Test Mode Description Remark TM1 Charging & Playing With Earphone TM2 Downloading Connected to PC TM3 Camera on Powered by battery TM4 / / EUT Cable List and Details Cable Description Length (M) Shielded/Unshielded With Core/Without Core USB Cable 0.8 Shielded Without Ferrite Earphone 1.5 Unshielded Without Ferrite Auxiliary Equipment List and Details Description Manufacturer Model Serial Number Notebook Lenovo E10 LR-63C8R Special Cable List and Details Cable Description Length (M) Shielded/Unshielded With Core/Without Core / / / / 1.6 Measurement Uncertainty Measurement uncertainty Parameter Conditions Uncertainty Conducted Emissions Conducted ±2.88dB Transmitter Spurious Emissions Radiated ±5.1dB REPORT NO.: STR16028063I-1 PAGE 5 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 1.7 Test Equipment List and Details Description Manufacturer Model Serial Number Cal Date Due Date Spectrum Analyzer Agilent E4407B MY41440400 2015-06-17 2016-06-16 Spectrum Analyzer Rohde & Schwarz FSP 836079/035 2015-06-17 2016-06-16 EMI Test Receiver Rohde & Schwarz ESVB 825471/005 2015-06-17 2016-06-16 Amplifier Agilent 8447F 3113A06717 2015-06-17 2016-06-16 Amplifier C&D PAP-1G18 2002 2015-06-17 2016-06-16 Broadband Antenna Schwarz beck VULB9163 9163-333 2015-06-17 2016-06-16 Horn Antenna ETS 3117 00086197 2015-06-17 2016-06-16 Loop Antenna Schwarz beck FMZB 1516 9773 2015-06-17 2016-06-16 EMI Test Receiver Rohde & Schwarz ESPI 101611 2015-06-17 2016-06-16 L.I.S.N Schwarz beck NSLK8126 8126-224 2015-06-17 2016-06-16 Pulse Limiter Rohde & Schwarz ESH3-Z2 100911 2015-06-17 2016-06-16 REPORT NO.: STR16028063I-1 PAGE 6 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 2. SUMMARY OF TEST RESULTS FCC Rules Description of Test Item Result §15.107 (a) Conducted Emissions Compliant §15.109 (a) Radiated Emissions Compliant N/A: not applicable REPORT NO.: STR16028063I-1 PAGE 7 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 3. Conducted Emissions 3.1 Test Procedure Test is conducting under the description of ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. 3.2 Basic Test Setup Block Diagram Adapter/Computer EUT LISN 1.0 m To Receiver Non-conduction table 80 cm above Ground Plane 1. 5 m REPORT NO.: STR16028063I-1 PAGE 8 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 3.3 Environmental Conditions Temperature: 23 C Relative Humidity: 52 ATM Pressure: 1011 mbar 3.4 Summary of Test Results/Plots According to the data in section 3.6, the EUT complied with the FCC Part 15.107(a) Conducted margin for a Class B device, with the worst margin reading of: -2.95 dB at 0.1500 MHz in the Line, Peak detector, TM2, 0.15-30MHz 3.5 Conducted Emissions Test Data REPORT NO.: STR16028063I-1 PAGE 9 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Plot of Conducted Emissions Test Data EUT: Smart phone Tested Model: Platinum 6.0+ Operating Condition: TM1 Comment: AC 120V/60Hz; Adapter DC 5V Test Specification: Neutral No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 0.1499 43.47 10.50 53.97 66.00 -12.03 peak 2 0.1499 29.78 10.50 40.28 56.00 -15.72 AVG 3* 0.4380 42.53 7.50 50.03 57.10 -7.07 peak 4 0.4380 31.06 7.50 38.56 47.10 -8.54 AVG 5 0.8700 38.42 10.09 48.51 56.00 -7.49 peak 6 0.8740 27.35 10.12 37.47 46.00 -8.53 AVG REPORT NO.: STR16028063I-1 PAGE 10 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Test Specification: Line No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 0.1900 43.40 8.10 51.50 64.04 -12.54 peak 2 0.1940 31.40 7.86 39.26 53.86 -14.60 AVG 3 0.5265 32.29 7.69 39.98 46.00 -6.02 AVG 4* 0.5300 42.56 7.71 50.27 56.00 -5.73 peak 5 1.0180 38.38 11.00 49.38 56.00 -6.62 peak 6 1.0180 26.21 11.00 37.21 46.00 -8.79 AVG REPORT NO.: STR16028063I-1 PAGE 11 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Plot of Conducted Emissions Test Data EUT: Smart phone Tested Model: Platinum 6.0+ Operating Condition: TM2 Comment: AC 120V/60Hz; USB 5V Test Specification: Neutral No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB) (dBuV) (dBuV) (dB) 1* 0.1500 52.25 10.49 62.74 66.00 -3.26 peak 2 0.1500 30.52 10.49 41.01 56.00 -14.99 AVG 3 0.2060 45.55 7.50 53.05 63.37 -10.32 peak 4 0.2060 31.23 7.50 38.73 53.37 -14.64 AVG 5 4.2180 34.26 12.48 46.74 56.00 -9.26 peak 6 4.2180 20.88 12.48 33.36 46.00 -12.64 AVG REPORT NO.: STR16028063I-1 PAGE 12 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Test Specification: Line No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB) (dBuV) (dBuV) (dB) 1* 0.1500 52.56 10.49 63.05 66.00 -2.95 peak 2 0.1500 29.20 10.49 39.69 56.00 -16.31 AVG 3 0.2020 47.27 7.50 54.77 63.53 -8.76 peak 4 0.2020 33.60 7.50 41.10 53.53 -12.43 AVG 5 4.1980 33.79 12.47 46.26 56.00 -9.74 peak 6 4.1980 20.76 12.47 33.23 46.00 -12.77 AVG REPORT NO.: STR16028063I-1 PAGE 13 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 4. Radiated Emissions 4.1 Test Procedure The setup of EUT is according with per ANSI C63.4-2014 measurement procedure. The specification used was with the FCC Part 15.109 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Antenna Tower 1m-4m 3m EUT SYS 0.8m Turntable Table To EMI Receiver Ground Plane REPORT NO.: STR16028063I-1 PAGE 14 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. 4.2 Test Receiver Setup Frequency :9kHz-30MHz Frequency :30MHz-1GHz Frequency :Above 1GHz RBW=10KHz, RBW=120KHz, RBW=1MHz, VBW =30KHz VBW=300KHz VBW=3MHz(Peak), 10Hz(AV) Sweep time= Auto Sweep time= Auto Sweep time= Auto Trace = max hold Trace = max hold Trace = max hold Detector function = peak Detector function = peak, QP Detector function = peak, AV 4.3 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading – Corr. Factor The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBV means the emission is 6dBV below the maximum limit for a Class B device. The equation for margin calculation is as follows: Margin = Corr. Ampl. – FCC Part 15.109(a) Limit 4.4 Environmental Conditions Temperature: 23 C Relative Humidity: 55  ATM Pressure: 1011 mbar 4.5 Summary of Test Results/Plots According to the data, the EUT complied with the FCC Part 15.109(a) rule, and had the worst margin of: -4.03 dB at 62.6507 MHz in the Vertical polarization, TM1 Mode 9 kHz to 6.5 GHz, 3Meters REPORT NO.: STR16028063I-1 PAGE 15 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Plot of Radiated Emissions Test Data EUT: Smart phone Tested Model: Platinum 6.0+ Operating Condition: TM1 Comment: AC 120V/60Hz; Adapter DC 5V Test Specification: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 55.0274 21.19 5.32 26.51 40.00 -13.49 58 100 peak 2 63.9828 25.32 4.50 29.82 40.00 -10.18 326 100 peak 3 99.1797 23.69 5.01 28.70 43.50 -14.80 29 100 peak 4 147.9214 29.63 3.09 32.72 43.50 -10.78 209 100 peak 5 229.2931 23.00 8.68 31.68 46.00 -14.32 164 100 peak 6 682.3485 16.66 19.08 35.74 46.00 -10.26 14 100 peak REPORT NO.: STR16028063I-1 PAGE 16 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Test Specification: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 32.6340 29.30 4.04 33.34 40.00 -6.66 32 100 peak 2 53.5052 28.81 5.31 34.12 40.00 -5.88 267 100 peak 3 62.6507 31.17 4.80 35.97 40.00 -4.03 21 100 peak 4 95.7622 24.56 4.48 29.04 43.50 -14.46 32 100 peak 5 216.7828 24.13 7.40 31.53 46.00 -14.47 193 100 peak 6 682.3485 16.34 19.08 35.42 46.00 -10.58 245 100 peak REPORT NO.: STR16028063I-1 PAGE 17 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Plot of Radiated Emissions Test Data EUT: Smart phone Tested Model: Platinum 6.0+ Operating Condition: TM2 Comment: USB: DC5V Test Specification: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 40.4172 17.25 5.25 22.50 40.00 -17.50 25 100 peak 2 234.1684 17.12 8.98 26.10 46.00 -19.90 130 100 peak 3 399.0302 18.04 13.09 31.13 46.00 -14.87 16 100 peak 4 480.5276 20.96 13.12 34.08 46.00 -11.92 335 100 peak 5 593.0497 19.07 18.01 37.08 46.00 -8.92 29 100 peak 6 747.4826 18.76 19.20 37.96 46.00 -8.04 53 100 peak REPORT NO.: STR16028063I-1 PAGE 18 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Test Specification: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 35.0048 21.75 4.39 26.14 40.00 -13.86 325 100 peak 2 96.7749 17.36 4.65 22.01 43.50 -21.49 23 100 peak 3 187.7530 21.29 3.11 24.40 43.50 -19.10 44 100 peak 4 533.8321 18.12 14.32 32.44 46.00 -13.56 185 100 peak 5 593.0497 19.97 18.01 37.98 46.00 -8.02 158 100 peak 6 750.1083 20.46 19.09 39.55 46.00 -6.45 215 100 peak REPORT NO.: STR16028063I-1 PAGE 19 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Plot of Radiated Emissions Test Data EUT: Smart phone Tested Model: Platinum 6.0+ Operating Condition: TM3 Comment: DC 3.8V Test Specification: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 36.2541 17.58 4.62 22.20 40.00 -17.80 253 100 peak 2 54.0711 19.00 5.31 24.31 40.00 -15.69 363 100 peak 3 99.8777 24.00 5.11 29.11 43.50 -14.39 132 100 peak 4 242.5253 22.33 9.43 31.76 46.00 -14.24 89 100 peak 5 601.4265 16.53 19.22 35.75 46.00 -10.25 30 100 peak 6 866.0879 18.86 17.45 36.31 46.00 -9.69 156 100 peak REPORT NO.: STR16028063I-1 PAGE 20 OF 21 FCC PART 15B

Shenzhen SEM.Test Technology Co., Ltd. Test Specification: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 39.2991 28.11 5.13 33.24 40.00 -6.76 235 100 peak 2 53.8818 27.43 5.31 32.74 40.00 -7.26 123 100 peak 3 63.0916 29.40 4.70 34.10 40.00 -5.90 78 100 peak 4 99.8777 24.84 5.11 29.95 43.50 -13.55 183 100 peak 5 237.4760 22.36 9.18 31.54 46.00 -14.46 24 100 peak 6 734.4913 16.82 19.22 36.04 46.00 -9.96 323 100 peak Note: Testing is carried out with frequency rang 9kHz to the 6.5GHz, which above 1GHz is close to the noise base even antenna close up to 1meter distance according the measurement of ANSI C63.4. The measurements greater than 20dB below the limit from 9kHz to 30MHz and test data are not provided. ***** END OF REPORT ***** REPORT NO.: STR16028063I-1 PAGE 21 OF 21 FCC PART 15B


Document Created: 2016-04-01 10:43:48
Document Modified: 2016-04-01 10:43:48
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC