SAR report part 2

FCC ID: 2ABOSSKYPANDA

RF Exposure Info

Download: PDF
FCCID_3879833

" in Collaboration with \\‘\\‘\""'I"/ tz 2 B {AnJ | a®7"]‘J, e <w\w BP \ AREX | | Sz Cauration Lporarony MC 4 m e NAS Add: No.51 Xueyuan Road, Haidiah District, Beljing, 100191, China *%/"7——> ? CAUBRAHON Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 "/,,/,,h‘\\\\ CNAS LO570 E—mail: ettl@chinattl.com Hitp://www.chinattl.en Client ccls Certificate No: Z16—97089 CALIBRATION CERTIFICATE Object D835V2 — SN: 40154 Calibration Procedure(s) FD—z11—2—003—01 Calibration Procedures for dipole validation kits Calibration date: Jun 16, 2016 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probatbility are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)‘c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Power sensor NRP—Z91 101547 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Reference Probe EX3DV4 SN 7307 19—Feb—16(SPEAG,N0.EX3—7307_Feb16) Feb—17 DAE4 SN 771 02—Feb—16(CTTL—SPEAG,N0.Z16—97011) Feb—17 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration | Signal Generator E4438C MY49071430 01—Feb—16 (CTTL, No.J16X00893) Jan—17 Network Analyzer E5071C MY46110673 26—Jan—16 (CTTL, No.J16X00894) Jan—17 | | Name Function Signature Calibrated by: Zhao Jing SAR Test Engineer éé/ | Reviewed by: Qi Dianyuan SAR Project Leader Approved by: Lu Bingsong Deputy Director of the laboratory f’[, Jfi"(?; Issued: Jun 17, 18 This calibration certificate shall not be reproduced except in full without written approval of the—faboratory. Certificate No: Z16—97089 Page 1 of 8

CCGIS b« in Collaboration with a TTZ/, L CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORMx,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209—2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. * SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z16—97089 Page 2 of 8

CCGIS §7T7Tp a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hittp://www.chinattl.cn | Measurement Conditions ) DASY system configuration, as far as not given on page 1. DASY Version DASY52 52.8.8.1258 i Extrapolation Advanced Extrapolation } Phantom Triple Flat Phantom 5.1C | Distance Dipole Center — TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 835 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 41.5 0.90 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 41.0 £ 6 % 0.89 mho/m + 6 % Head TSL temperature change during test <1.0 °C ——— ——— SAR result with Head TSL SAR averaged over 1_Cm"_(1 g) of Head TSL Condition SAR measured 250 mW input power 2.30 mW /g SAR for nominal Head TSL parameters normalized to 1W 9.24 mW 7g + 20.8 % (k=2) SAR averaged over 10 Cm° (10 g) of Head TSL Condition SAR measured 250 mW input power 1.50 mW / g SAR for nominal Head TSL parameters normalized to 1W 6.02 mW /g + 20.4 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 55.2 0.97 mho/m ; Measured Body TSL parameters (22.0 £ 0.2) °C 55.4 + 6 % 0.99 mho/m + 6 % Body TSL temperature change during test <1.0 °C ———— ———— SAR result with Body TSL SAR averaged over 1 _Cm" _(1 g) of Body TSL Condition SAR measured 250 mW input power 2.43 mW /g SAR for nominal Body TSL parameters normalized to 1W 9.57 mW Ig + 20.8 % (k=2) SAR averaged over 10 cm" (10 g) of Body TSL Condition SAR measured 250 mW input power 1.61 mW /g SAR for nominal Body TSL parameters normalized to 1W 6.36 mW q + 20.4 % (k=2) Certificate No: Z16—97089 Page 3 of 8

CCGIS | §77J;, a CALIBRATION LABORATORY \/ | Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.cn Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 49.20— 3. 1110 Return Loss — 29.80B Antenna Parameters with Body TSL Impedance, transformed to feed point 46.60— 2.33]0 Return Loss — 27.40B General Antenna Parameters and Design Electrical Delay (one direction) 1.508 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Z16—97089 Page 4 of 8 sege— > ho nna n rnmes eneau e en e en n mgc n n ~o ++

CCIS §77Tr a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en DASYS Validation Report for Head TSL Date: 06.16.2016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 40154 Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1: 1 Medium parameters used: f= 835 MHz: 0 =0.891 $/m; s, = 40.97; p = 1000 kg/m* Phantom section: Right Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: + Probe: EX3DV4 — SN7307; ConvF(10.01, 10.01,10.01); Calibrated: 2/19/2016; + Sensor—Surface: 2mm (Mechanical Surface Detection) + Electronics: DAE4 Sn771; Calibrated: 2016—02—02 + Phantom: Triple Flat Phantom 5.1C; Type: QD 000 PS1 CA; Serial: 1161/1 + Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=Smm Reference Value = 58.14V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 3.41 W/kg SAR(I g) = 2.3 W/kg; SAR(10 g) = 1.5 W/kg Maximum value of SAR (measured) =2.91 W/kg dB 0 213 ~4.25 —6.38 —8.50 * | —10.63 pas 0 dB =2.91 W/kg = 4.64 dBW/kg Certificate No: Z16—97089 Page 5 of 8

CCGIS ’\. in Collaboration with Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http://www.chinattl.en Impedance Measurement Plot for Head TSL [ Tri sil Log Mag 10.00ds/ ref 0.000ds [F1] 50. 00 1 835.00000 mHz ~20.789 de 40. 00 10. 00 0. 000 ~10. 00 —20.00 | —50. 00 4 MBR si1 smith (R+JX) scale 1.000u [F1 bel] s1 835.00000 mhz 49.186 n —3.1105 n 61.27Z—pF_ [1. Start685 Nez IFSW 100 He Stop 1.035 GHz TR Ce rtificate No: Z16—97089 Page 6 of 8

CCIS | in Collaboration with _<emm_ : &/‘J°Jj, 4 CALIBRATION LABORATORY -‘-’ Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.cn DASYS Validation Report for Body TSL Date: 06.16.2016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 40154 Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1: 1 Medium parameters used: £= 835 MHz: 0 = 0.991 S/m; &, = 55.41; p = 1000 kg/m‘ Phantom section: Center Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2007) DASYS Configuration: «_ Probe: EX3DV4 — SN7307; ConvF(9.83.9.83, 9.83); Calibrated: 2/19/2016; * Sensor—Surface: 2mm (Mechanical Surface Detection) + Electronics: DAE4 Sn771; Calibrated: 2016—02—02 + Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 * Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=Smm, dy=5mm, dz=Smm Reference Value = 54.01 V/m; Power Drift= 0.01 dB Peak SAR (extrapolated) = 3.53 W/kg SAR(I g) =2.43 W/kg; SAR(10 g) = 1.61 W/kg Maximum value of SAR (measured) = 3.04 W/kg ~1.99 ~3.98 5.96 ~7.95 —9.94 0 dB = 3.04 W/kg = 4.83 dBW/kg Certificate No: Z16—97089 Page 7 of8 Coee sc cce esns eone en n merrvnn n n nenn n eene n y n en en e m nene cce s revpevs e ven enc ce rves hn n mt on nnnrar en a nc en es mgs <— n + >

CCGIS s In Collaboration with CALIBRATION LABORATORY zmc Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Impedance Measurement Plot for Body TSL Tri si1 Log Mag 10.00d8/ ref 0.000de [F1] >L §35.00000 mHz —27.407 do 6 o s i P 2 | —50.00 l)- s11 smith (R+]X) Scale 1.000u [F1 bel] | >1 835.00000 mHz 46.601 o —2.3261 n 81.94g—pr —. _ || l [——p~— i1 etare cesw waw 100 he Stop 1085 one IRemh Certificate No: Z16—97089 Page 8 of 8

Report No: CCISE1804008501 Dipole Impedance and Return Loss calibration Report Object: D835V2 - SN: 4d154 Calibration Date: June 09, 2017 Calibration reference: IEEE Std 1528:2013, IEC 62209-1:2006, FCC KDB 865664 D01 Calibrated By: (Janet Wei, SAR project engineer) Reviewed By: (Bruce Zhang, Technical manager) Environment of Test Site Temperature: 21 ~ 23C Humidity: 50~60% RH Atmospheric Pressure: 1011 mbar Test Data Measurement Plot for Head TSL In 2017 Measurement Plot for Body TSL In 2017 Comparison with Original report Calibrated By Calibrated By CCIS Items Deviation Limit Speag In 2017 Impendence for Head TSL 49.19Ω –3.11jΩ 51.46Ω –4.26jΩ 2.27Ω –1.15jΩ ±5Ω Return Loss for Head TSL -29.79 -27.05 -9.2% ±20%(No less than 20 dB) Impendence for Body TSL 46.6Ω-2.33 jΩ 46.24Ω-4.46 jΩ -0.36Ω-2.13 jΩ ±5Ω Return Loss for Body TSL -27.4dB -26.8dB -2.19% ±20%(No less than 20 dB) Result Compliance Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804085 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: info@ccis-cb.com Page 84 of 96

t" in Collaboration with TTL s_p e a g uts m i:“i\\\v//é, es se iiaaazye>" CALIBRATION LABORATORY 30 ac=—MRA* CNAS tift Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China 3//—>y§ v CALIBRATION Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 Arlibits® CNAS LO570 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Client CCIS Certificate No: 216—97090 CALIBRATION CERTIFICATE Object D1900V2 — SN: 5d175 Calibration Procedure(s) FD—z11—2—003—01 Calibration Procedures for dipole validation kits Calibration date: Jun 15, 2016 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22#3)C and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Power sensor NRP—Z91 101547 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Reference Probe EX3DV4 SN 7307 19—Feb—16(SPEAG,No.EX3—7307_Feb16) Feb—17 DAE4 SN 771 02—Feb—16(CTTL—SPEAG,N0.216—97011) Feb—17 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Signal Generator E4438C MY49071430 O1—Feb—16 (CTTL, No.J16X00893) Jan—17 Network Analyzer E5071C MY46110673 26—Jan—16 (CTTL, No.J16X00894) Jan—17 Name Function Signature Calibrated by: Zhao Jing SAR Test Engineer % Reviewed by: Qi Dianyuan SAR Project Leader M/ Approved by: Lu Bingsong Deputy Director of the laboratory [t m¢2 Issued: Jun 17, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z16—97090 Page 1 of 8

CCIS | b" in Collaboration with a=‘/"]"J, a ‘v CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORMx,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209—2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. * SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z16—97090 Page 2 of 8

CCGIS m * in Collaboration with TTL _a_§___ V CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY52 52.8.8.1258 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1C Distance Dipole Center— TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 1900 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 1.40 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 40.3 + 6 % 1.38 mho/m + 6 % Head TSL temperature change during test <1.0 °C ~—— ~——— SAR result with Head TSL SAR averaged over 1_cm" _(1 g) of Head TSL Condition SAR measured 250 mW input power 9.99 mW / g SAR for nominal Head TSL parameters normalized to 1W 40.4 mW 1g + 20.8 % (k=2) SAR averaged over 10 em‘ (10 g) of Head TSL Condition SAR measured 250 mW input power 5.28 mW / g SAR for nominal Head TSL parameters normalized to 1W 21.3 mW 1g # 20.4 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 53.3 + 6 % 1.54 mho/m + 6 % Body TSL temperature change during test <1.0 °C ~— ~—— SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 10.1 mW /g SAR for nominal Body TSL parameters normalized to 1W 40.1 mW /g + 20.8 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL Condition SAR measured 250 mW input power 5.39 mW /g SAR for nominal Body TSL parameters normalized to 1W 21.5 mW /g + 20.4 % (k=2) Certificate No: Z16—97090 Page 3 of 8

‘ * in Collaboration with m 7//, ZL—2._SC_2_—§........ | limamyye~ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 53.20+ 5.44j0 Return Loss — 24.30B Antenna Parameters with Body TSL Impedance, transformed to feed point 48.90+ 5.75j0 Return Loss —24.60B General Antenna Parameters and Design Electrical Delay (one direction) 1.304 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG | Certificate No: Z16—97090 Page 4 of 8 _i m > c repevirrve m rev rvey i ( c nouge se yc >

CCGIS .b‘ in Collaboration with a=‘/"/"J, a V CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en DASYS5 Validation Report for Head TSL Date: 06.15.2016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN: 5d175 Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used: f= 1900 MHz; 0 = 1.381 $/m; sr = 40.33; p = 1000 kg/m3 Phantom section: Right Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2007) DASYS Configuration: * Probe: EX3DV4 — SN7307; ConvF(8.1, 8.1, 8.1); Calibrated: 2/19/2016; * Sensor—Surface: 2mm (Mechanical Surface Detection) * Electronics: DAE4 Sn771; Calibrated: 2/2/2016 | * Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 | + Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 103.5V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 18.0W/kg SAR(I g) =9.99 W/kg; SAR(10 g) = 5.28 W/kg Maximum value of SAR (measured) =14.1 W/kg dB 0 —3.41 —6.82 —10.24 ~13.65 a —17.06 fl——_— 0 dB =14.1 W/kg =11.49 dBW/kg Certificate No: Z16—97090 Page 5 of 8

CCGIS liRmamyye>~ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Impedance Measurement Plot for Head TSL [ Tri 11 Log Mag 10.00d8/ Ref 0.000d8 [F1] | 509 rs2~1:5000000 onz <24.303 do 40. 00 30. 00 20.00 | 10. 00 0. 000p) —10. 00 ~20. 00 ~30. 00 ~40. 00 ~$5.00 6G._._.._._._ MIR 511 smith (R+jX) scale 1.000U [F1 bel] »1 1.9000000 Ghz 53.173 n 5.4373 n 455.46—pH ~%. [1 Strt 17 GHe i IFSW 100 He Stop 2.1 GHtc BB Certificate No: Z16—97090 Page 6 of 8

CCGIS {”1.\1/ I;Co!lubomtionewith 3 ‘/ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en DASYS Validation Report for Body TSL Date: 06.15.2016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN: 50175 Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used: f= 1900 MHz; 0 = 1.537 S/m; s, = 53.34; p = 1000 kg/m3 Phantom section: Center Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2007) DASYS Configuration: + Probe: EX3DV4 — SN7307; ConvF(7.67, 7.67, 7.67); Calibrated: 2/19/2016; + Sensor—Surface: 2mm (Mechanical Surface Detection) * Electronics: DAE4 Sn771; Calibrated: 2/2/2016 + Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1 161/1 + Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 96.11 V/m; Power Drift =—0.03 dB Peak SAR (extrapolated) = 17.8 W/kg SAR(I g) = 10.1 W/kg; SAR(10 g) = 5.39 W/kg Maximum value of SAR (measured) = 14.3 W/kg dB 0 ~3.23 —6.47 —9.70 ~12.94 1617 |2 £— lnssmmmmmmmemgemmmmm5 mmmeaccceeees 0 dB = 14.3 W/kg = 11.55 dBW/kg Certificate No: Z16—97090 Page 7 of 8

CCGIS * In Collaboration with a=/"7"J, a Wigaazzyy»~~ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.n Impedance Measurement Plot for Body TSL Tri S11 Log Mag 10.00d8/ Ref 0.000db [F1] 59.00 »1 1.9000000 nz <24.565 db 40. 00 30. 00 20. 00 10. 00 0. 000p ~10.00 |—== | —20.00 § ~30.00 ~40. 00 ~50.00 A. MIBRB 511 smith (RJX) scale 1.000U [F1 bel] >1 1.9000000 Ghz 48.877 n 5.7473 o 481.534( ~~ ® (1 Strt 17642 Stop 2.1 GHz IRelli Certificate No: Z16—97090 Page 8 of 8

Report No: CCISE1804008501 Dipole Impedance and Return Loss calibration Report Object: D1900V2 - SN: 5d175 Calibration Date: June 09, 2017 Calibration reference: IEEE Std 1528:2013, IEC 62209-1:2006, FCC KDB 865664 D01 Calibrated By: (Janet Wei, SAR project engineer) Reviewed By: (Bruce Zhang, Technical manager) Environment of Test Site Temperature: 18 ~ 25C Humidity: 50~60% RH Atmospheric Pressure: 1011 mbar Test Data Measurement Plot for Head TSL In 2017 Measurement Plot for Body TSL In 2017 Comparison with Original report Calibrated By CCIS Items Calibrated By Speag Deviation Limit In 2017 Impendence for Head TSL 53.17Ω+5.44 jΩ 51.36Ω+7.68 jΩ -1.81Ω+2.2jΩ ±5Ω Return Loss for Head TSL -24.3dB -22.3dB -8.2% ±20%(No less than 20 dB) Impendence for Body TSL 48.89Ω+5.75 jΩ 47.47Ω+4.24 jΩ -1.42Ω-1.5jΩ ±5Ω Return Loss for Body TSL -24.6dB -26.4dB 7.3% ±20%(No less than 20 dB) Result Compliance Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804085 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: info@ccis-cb.com Page 93 of 96

CCGIS s * \‘. TUp 8 P BBA 5 m—%.e——;-:éecms““ * In Collaboration with ‘\\‘ /4 TTL y CALIBRATION Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China I”"m“\‘\~ CNAS LO570 Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 HPME E—mail: ctt|@chinattl.com Client ; _COCIS Certificate No: 218—97054 CALIBRATION CERTIFICATE Object DAE4 — SN: 1373 Calibration Procedure(s) FF—Z11—002—01 Calibration Procedure for the Data Acquisition Electronics (DAEx) Calibration date: March 22, 2018 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(223)°c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Process Calibrator 753 1971018 27—Jun—17 (CTTL, No.J17X05859) June—18 Name Function Signature Calibrated by: Yu Zongying SAR Test Engineer //é,@ Reviewed by: Lin Hao SAR Test Engineer Tpf}i% Approved by: Qi Dianyuan SAR Project Leader EeP Issued: March 23, 2018 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: Z18—97054 Page 1 of 3

CCGIS In Collaboration with <TTL a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—25 12 Fax: +86—10—62304633—2504 E—mail: ctt!@chinattl.com Hitp:/Awww.chinattl.en Glossary: DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters: e DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. e Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. e The report provide only calibration results for DAE, it does not contain other performance test results. Certificate No: Z18—97054 Page 2 of 3 rrvpeviersve fgs <— cn<>

Report No: CCISE1804008501 ------End of Report------ Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804085 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: info@ccis-cb.com Page 96 of 96


Document Created: 2018-06-06 14:22:34
Document Modified: 2018-06-06 14:22:34
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC