CCISE180900401 MB Test Report

FCC ID: 2ABOSSKYMUSIC

Test Report

Download: PDF
FCCID_4023901

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE180900401 1. Cover Page FCC REPORT (GSM) Applicant: Sky Phone LLC 1348 Washington Av.Suite 350, Miami Beach, Florida, United Address of Applicant: States Equipment Under Test (EUT) Product Name: Feature Phone Model No.: SKY Music Trade mark: SKY DEVICES FCC ID: 2ABOSSKYMUSIC FCC CFR Title 47 Part 2 Applicable standards: FCC CFR Title 47 Part 22 Subpart H FCC CFR Title 47 Part 24 Subpart E Date of sample receipt: 04 Sep., 2018 Date of Test: 04 Sep., to 11 Sep., 2018 Date of report issued: 12 Sep., 2018 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.

Report No: CCISE180900401 2. Version Version No. Date Description 00 12 Sep., 2018 Original Tested by: Date: 12 Sep., 2018 Test Engineer Reviewed by: Date: 12 Sep., 2018 Project Engineer Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 37

Report No: CCISE180900401 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5 5.3 TEST MODES .......................................................................................................................................................... 6 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 6 5.5 MEASUREMENT UNCERTAINTY.............................................................................................................................. 6 5.6 LABORATORY FACILITY.......................................................................................................................................... 6 5.7 LABORATORY LOCATION ....................................................................................................................................... 6 5.8 TEST INSTRUMENTS LIST ....................................................................................................................................... 7 6. TEST RESULTS ........................................................................................................................................................... 8 6.1 CONDUCTED OUTPUT POWER, ERP AND EIRP .................................................................................................. 8 6.2 OCCUPY BANDWIDTH .......................................................................................................................................... 10 6.3 PEAK-TO-AVERAGE POWER RATIO .................................................................................................................... 14 6.4 MODULATION CHARACTERISTIC .......................................................................................................................... 16 6.5 OUT OF BAND EMISSION AT ANTENNA TERMINALS .............................................................................................. 16 6.6 FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT............................................................................... 20 6.7 FREQUENCY STABILITY V.S. TEMPERATURE MEASUREMENT............................................................................. 23 6.8 FREQUENCY STABILITY V.S. VOLTAGE MEASUREMENT ..................................................................................... 25 7 TEST SETUP PHOTO ............................................................................................................................................... 26 8 EUT CONSTRUCTIONAL DETAILS ...................................................................................................................... 27 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 37

Report No: CCISE180900401 4. Test Summary Test Item Section in CFR 47 Result Pass Part 1.1307 RF Exposure (SAR) (Please refer to Part 2.1093 SAR Report) Part 2.1046 RF Output Power Part 22.913 (a)(2) Pass Part 24.232 (c) Peak-to-Average Power Ratio Part 24.232 (d) Pass Modulation Characteristics Part 2.1047 Pass Part 2.1049 99% & -26 dB Occupied Bandwidth Part 22.917(b) Pass Part 24.238(b) Part 2.1051 Spurious Emissions at Antenna Terminal Part 22.917 (a) Pass Part 24.238 (a) Part 2.1053 Field Strength of Spurious Radiation Part 22.917 (a) Pass Part 24.238 (a) Part 22.917 (a) Out of band emission, Band Edge Pass Part 24.238 (a) Part 22.355 Frequency stability vs. temperature Part 24.235 Pass Part 2.1055(a)(1)(b) Part 22.355 Frequency stability vs. voltage Part 24.235 Pass Part 2.1055(d)(2) Pass: The EUT complies with the essential requirements in the standard. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 37

Report No: CCISE180900401 5. General Information 5.1 Client Information Applicant: Sky Phone LLC Address: 1348 Washington Av.Suite 350, Miami Beach, Florida, United States Manufacturer Sky Phone LLC Address: 1348 Washington Av.Suite 350, Miami Beach, Florida, United States 5.2 General Description of E.U.T. Product Name: Feature Phone Model No.: SKY Music Operation Frequency range: GSM 850: 824.20MHz-848.80MHz PCS1900: 1850.20MHz-1909.80MHz Modulation type: GSM/GPRS: GMSK Antenna type: Internal Antenna Antenna gain: GSM 850: -3.3 dBi PCS 1900: -1.2 dBi Power supply: Rechargeable Li-ion Battery DC3.7V-600mAh AC adapter: Model: SKY Music Input: AC100-240V, 50/60Hz, 0.2A Output: DC 5.0V, 500mA Operation Frequency List: GSM 850 PCS1900 Channel Frequency (MHz) Channel Frequency (MHz) 128 824.20 512 1850.20 129 824.40 513 1850.40 …. …. …. …. 189 836.40 660 1879.80 190 836.60 661 1880.00 191 836.80 662 1880.20 … … … … 250 848.60 809 1909.60 251 848.80 810 1909.80 Regards to the operating frequency range over 10 MHz, the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, and the selected channel see below: GSM850 PCS1900 Channel Frequency(MHz) Channel Frequency(MHz) Lowest channel 128 824.20 Lowest channel 512 1850.20 Middle channel 190 836.60 Middle channel 661 1880.00 Highest channel 251 848.80 Highest channel 810 1909.80 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 5 of 37

c c I s Report No: CCISE180900401 5.3 Test modes Operating Environment: Temperature: Normal: 15°C ~35°C, Extreme: —30°C ~+50°C Humidity: 20 % ~ 75 % RH Atmospheric Pressure: 1008 mbar Voltage: Nominal: 3.7V¥de, Extreme: Low 3.5 Vde, High 4.2 Vde Test mode: GSM mode Keep the EUT communication with simulated station in GSM mode GPRS mode Keep the EUT communication with simulated station in GPRS mode Remark: The EUT has been tested under continuous transmitting mode. Channel Low, Mid and High for each type band with rated data rate were chosen for full testing. The field strength of spurious radiation emission was measured as EUT stand—up position (H mode) and lie down position (E1, E2 mode) for these modes with power adaptor, earphone and Data cable. Just the worst case position (H mode) shown in report. 5.4 Description of Support Units Test Equipment Manufacturer Model No. Serial No. Simulated Station Anritsu MT8820C 6201026545 5.5 Measurement Uncertainty Parameters Expanded Uncertainty Radiated Emission (OkHz ~ S3OMHz) +2.76 dB (k=2) Radiated Emission (3OMHz ~ 1000MHz) +4.28 dB (k=2) Radiated Emission (1GHz ~ 18GHz) +5.72 dB (k=2) Radiated Emission (18GHz ~ 40GHz) +2.88 dB (k=2) 5.6 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations: ® FCC — Registration No.: 727551 Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been accredited as a testing laboratory by FCC (Federal Communications Commission). The Registration No. is 727551. ® 1C — Registration No.: 10106A—1 The 3m Semi—anechoic chamber of Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A—1. ® CNAS — Registration No.: CNAS L6048 Shenzhen Zhongjian Nanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048. ® A2LA — Registration No.: 4346.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. The test scope can be found as below link: https/portal.a?la.org/scopepdf/4346—01.pdf 5.7 Laboratory Location Shenzhen Zhongjian Nanfang Testing Co., Ltd. Address: No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Tel: +86—755—23118282, Fax: +86—755—23116366 Email: info@ccis—cb.com, Website: http:/www.ccis—cb.com Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 6 of 37

Report No: CCISE180900401 5.8 Test Instruments list Cal. Date Cal. Due date Test Equipment Manufacturer Model No. Serial No. (mm-dd-yy) (mm-dd-yy) 3m SAC SAEMC 9m*6m*6m 966 07-22-2017 07-21-2020 BiConiLog Antenna SCHWARZBECK VULB9163 497 03-16-2018 03-15-2019 Biconical Antenna SCHWARZBECK VUBA9117 359 06-22-2017 06-21-2020 Horn Antenna SCHWARZBECK BBHA9120D 916 03-16-2018 03-15-2019 Horn Antenna SCHWARZBECK BBHA9120D 1805 06-22-2017 06-21-2020 Horn Antenna SCHWARZBECK BBHA 9170 BBHA9170582 11-21-2017 11-20-2018 EMI Test Software AUDIX E3 Version: 6.110919b Pre-amplifier HP 8447D 2944A09358 03-07-2018 03-06-2019 Pre-amplifier CD PAP-1G18 11804 03-07-2018 03-06-2019 Spectrum analyzer Rohde & Schwarz FSP30 101454 03-07-2018 03-06-2019 Spectrum analyzer Rohde & Schwarz FSP40 100363 11-21-2017 11-20-2018 EMI Test Receiver Rohde & Schwarz ESRP7 101070 03-07-2018 03-06-2019 Spectrum Analyzer Agilent N9020A MY50510123 11-10-2017 11-09- 2018 Signal Generator Rohde & Schwarz SMX 835454/016 03-07-2018 03-06-2019 Signal Generator R&S SMR20 1008100050 03-07-2018 03-06-2019 RF Switch Unit MWRFTEST MW200 N/A N/A N/A Test Software MWRFTEST MTS8200 Version: 2.0.0.0 Cable ZDECL Z108-NJ-NJ-81 1608458 03-07-2018 03-06-2019 Cable MICRO-COAX MFR64639 K10742-5 03-07-2018 03-06-2019 Cable SUHNER SUCOFLEX100 58193/4PE 03-07-2018 03-06-2019 DC Power Supply XinNuoEr WYK-10020K 1409050110020 10-31-2017 10-30-2018 Temperature HengPu HPGDS-500 20140828008 09-24-2017 09-23-2018 Humidity Chamber Simulated Station Rohde & Schwarz CMW500 140493 06-24-2018 06-23-2019 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 7 of 37

Report No: CCISE180900401 6. Test results 6.1 Conducted Output Power, ERP and EIRP Test Requirement: FCC part 22.913(a)(2), FCC part 24.232(c) Test Method: ANSI/TIA-603-D 2010 Limit: GSM 850: 7W, PCS 1900: 2W Test setup: Test Procedure: The transmitter output was connected to a calibrated attenuator, the other end of which was connected to the simulated station. Transmitter output power was read off in dBm. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 8 of 37

Report No: CCISE180900401 Measurement Data: Burst Average power (dBm) Antenna Max. ERP ERP Limit EUT Mode 128 190 251 Gain (dBi) (dBm) (dBm) 824.20MHz 836.60MHz 848.80MHz GSM 850 33.15 33.35 33.38 -3.3 30.08 GPRS 850 (1 Uplink slot) 33.10 33.10 33.09 GPRS 850 (2 Uplink slot) 30.79 30.89 31.07 38.45 -3.3 29.80 GPRS 850 (3 Uplink slot) 29.74 29.67 29.88 GPRS 850 (4 Uplink slot) 27.57 27.65 27.75 Burst Average power (dBm) Antenna Max. EIRP EIRP Limit EUT Mode 512 661 810 Gain (dBi) (dBm) (dBm) 1850.20MHz 1880.00MHz 1909.80MHz PCS 1900 30.68 30.72 30.67 -1.2 29.52 GPRS 1900 (1 Uplink slot) 30.55 30.61 30.56 GPRS 1900 (2 Uplink slot) 28.07 28.33 28.61 33.00 -1.2 29.41 GPRS 1900 (3 Uplink slot) 27.01 27.31 27.60 GPRS 1900 (4 Uplink slot) 24.99 25.33 25.59 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 9 of 37

Report No: CCISE180900401 6.2 Occupy Bandwidth Test Requirement: FCC part 22.917(b), FCC part 24.238(b) Test Method: ANSI/TIA-603-D 2010 Test setup: Test Procedure: 1. The EUT’s output RF connector was connected with a short cable to the spectrum analyzer 2. RBW was set to about 1% of emission BW, VBW= 3 times RBW. 3. -26dBc display line was placed on the screen (or 99% bandwidth), the occupied bandwidth is the delta frequency between the two points where the display line intersects the signal trace. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 10 of 37

Report No: CCISE180900401 Measurement Data: 99% Occupy bandwidth EUT Mode Channel Frequency (MHz) -26dB bandwidth (kHz) (kHz) 128 824.2 246 322 GSM 850 190 836.6 244 318 251 848.8 250 316 512 1850.2 246 320 PCS 1900 661 1880.0 246 316 810 1909.8 246 318 Note: GSM & GPRS use the same modulation technical (GMSK), and with the same channels, so the 99% OBW and the -26dB of GPRS not performed. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 11 of 37

Report No: CCISE180900401 Test plot as follows: GSM 850 99% Occupy bandwidth 26dB Emission Bandwidth * RBW 10 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] * VBW 30 kHz 28.46 dBm * VBW 30 kHz 29.98 dBm Ref 40 dBm * Att 40 dB SWT 10 ms 824.186000000 MHz Ref 40 dBm * Att 40 dB SWT 10 ms 824.200000000 MHz 40 Offset 10 dB OBW246.000000000 kHz 40 Offset 10 dB ndB [T1] 26.00 dB Temp 1 [T1 OBW] 1 BW 322.000000000 kHz 1 A A 30 13.89 dBm 30 Temp 1 [T1 ndB] 824.080000000 MHz 3.82 dBm 1 PK 1 PK Temp 2 [T1 OBW] 824.040000000 MHz MAXH MAXH 20 14.77 dBm LVL 20 Temp 2 [T1 ndB] T2 LVL T1 824.326000000 MHz 3.80 dBm 824.362000000 MHz 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 824.2 MHz 100 kHz/ Span 1 MHz Center 824.2 MHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 08:58:56 Date: 5.SEP.2018 08:58:47 Lowest channel Lowest channel * RBW 10 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] * VBW 30 kHz 29.94 dBm * VBW 30 kHz 29.16 dBm Ref 40 dBm * Att 40 dB SWT 10 ms 836.598000000 MHz Ref 40 dBm * Att 40 dB SWT 10 ms 836.632000000 MHz 40 Offset 10 dB OBW244.000000000 kHz 40 Offset 10 dB ndB [T1] 26.00 dB 1 Temp 1 [T1 OBW] BW 318.000000000 kHz 1 14.86 dBm A Temp 1 [T1 ndB] A 30 30 836.482000000 MHz 3.53 dBm 1 PK 1 PK Temp 2 [T1 OBW] 836.446000000 MHz MAXH MAXH 20 13.93 dBm LVL 20 Temp 2 [T1 ndB] T1 LVL T2 836.726000000 MHz 3.68 dBm 836.764000000 MHz 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 836.6 MHz 100 kHz/ Span 1 MHz Center 836.6 MHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 08:59:11 Date: 5.SEP.2018 08:59:26 Middle channel Middle channel * RBW 10 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] * VBW 30 kHz 30.05 dBm * VBW 30 kHz 30.26 dBm Ref 40 dBm * Att 40 dB SWT 10 ms 848.816000000 MHz Ref 40 dBm * Att 40 dB SWT 10 ms 848.810000000 MHz 40 Offset 10 dB OBW250.000000000 kHz 40 Offset 10 dB ndB [T1] 26.00 dB 1 Temp 1 [T1 OBW] 1 BW 316.000000000 kHz 15.09 dBm A Temp 1 [T1 ndB] A 30 30 848.676000000 MHz 5.05 dBm 1 PK 1 PK Temp 2 [T1 OBW] 848.646000000 MHz MAXH MAXH 20 15.81 dBm LVL 20 Temp 2 [T1 ndB] T1 T2 LVL 848.926000000 MHz 4.83 dBm 848.962000000 MHz 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 848.8 MHz 100 kHz/ Span 1 MHz Center 848.8 MHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 09:00:00 Date: 5.SEP.2018 08:59:44 Highest channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 12 of 37

Report No: CCISE180900401 PCS 1900 99% Occupy bandwidth 26dB Emission Bandwidth * RBW 10 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] * VBW 30 kHz 25.85 dBm * VBW 30 kHz 25.31 dBm Ref 40 dBm * Att 40 dB SWT 10 ms 1.850182000 GHz Ref 40 dBm * Att 40 dB SWT 10 ms 1.850216000 GHz 40 Offset 10 dB OBW246.000000000 kHz 40 Offset 10 dB ndB [T1] 26.00 dB Temp 1 [T1 OBW] BW 320.000000000 kHz 10.97 dBm A Temp 1 [T1 ndB] A 30 1 30 1 1.850082000 GHz -1.07 dBm 1 PK 1 PK Temp 2 [T1 OBW] 1.850044000 GHz MAXH MAXH 20 11.59 dBm LVL 20 Temp 2 [T1 ndB] LVL 1.850328000 GHz -0.23 dBm T1 T2 1.850364000 GHz 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 1.8502 GHz 100 kHz/ Span 1 MHz Center 1.8502 GHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 09:01:20 Date: 5.SEP.2018 09:01:33 Lowest channel Lowest channel * RBW 10 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] * VBW 30 kHz 26.05 dBm * VBW 30 kHz 25.65 dBm Ref 40 dBm * Att 40 dB SWT 10 ms 1.879994000 GHz Ref 40 dBm * Att 40 dB SWT 10 ms 1.880000000 GHz 40 Offset 10 dB OBW246.000000000 kHz 40 Offset 10 dB ndB [T1] 26.00 dB Temp 1 [T1 OBW] BW 316.000000000 kHz 11.04 dBm A Temp 1 [T1 ndB] A 30 1 30 1 1.879880000 GHz -0.22 dBm 1 PK 1 PK Temp 2 [T1 OBW] 1.879846000 GHz MAXH MAXH 20 10.38 dBm LVL 20 Temp 2 [T1 ndB] LVL 1.880126000 GHz -0.70 dBm T1 T2 1.880162000 GHz 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 1.88 GHz 100 kHz/ Span 1 MHz Center 1.88 GHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 09:01:55 Date: 5.SEP.2018 09:01:46 Middle channel Middle channel * RBW 10 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] * VBW 30 kHz 25.25 dBm * VBW 30 kHz 25.38 dBm Ref 40 dBm * Att 40 dB SWT 10 ms 1.909842000 GHz Ref 40 dBm * Att 40 dB SWT 10 ms 1.909822000 GHz 40 Offset 10 dB OBW246.000000000 kHz 40 Offset 10 dB ndB [T1] 26.00 dB Temp 1 [T1 OBW] BW 318.000000000 kHz 12.37 dBm A Temp 1 [T1 ndB] A 30 30 1 1 1.909682000 GHz -0.79 dBm 1 PK 1 PK Temp 2 [T1 OBW] 1.909648000 GHz MAXH MAXH 20 9.46 dBm LVL 20 Temp 2 [T1 ndB] LVL T1 1.909928000 GHz 0.01 dBm T2 1.909966000 GHz 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 1.9098 GHz 100 kHz/ Span 1 MHz Center 1.9098 GHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 09:03:00 Date: 5.SEP.2018 09:03:09 Highest channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 13 of 37

Report No: CCISE180900401 6.3 Peak-to-Average Power Ratio Test Requirement: FCC part 24.232(d) Test Method ANSI/TIA-603-D 2010 The peak-to-average ratio (PAR) of the transmission may not exceed 13 Limit: dB. Test setup: Test Procedure: 1 The RF output of the transceiver was connected to a spectrum analyzer through appropriate attenuation. 2 Set the CCDF option in spectrum analyzer, RBW ≥ OBW, 3 Set the EUT working in highest power level, measured and recorded the 0.1% as PAPR level. 4 Repeat step 1~3 at other frequency and modulations. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data: Modulation Test channel PAPR GSM 850 190 0.08 PCS 1900 661 0.08 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 14 of 37

Report No: CCISE180900401 Test plots as below: GSM 850 PCS 1900 * RBW 1 MHz Delta 1 [T3 ] * RBW 1 MHz Delta 1 [T3 ] * VBW 3 MHz -0.08 dB * VBW 3 MHz -0.08 dB Ref 40 dBm * Att 40 dB SWT 2.5 ms 0.000000000 Hz Ref 40 dBm * Att 40 dB SWT 2.5 ms -70.000000000 kHz 40 Offset 10 dB Marker 1 [T1 ] 40 Offset 10 dB Marker 1 [T1 ] 1 32.70 dBm 29.13 dBm 11 836.550000000 MHz A 1.880000000 GHz A 30 30 1 PK 1 PK MAXH MAXH 20 20 LVL LVL 10 10 3 AV * 3 AV * MAXH 0 MAXH 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 836.6 MHz 500 kHz/ Span 5 MHz Center 1.88 GHz 500 kHz/ Span 5 MHz Date: 5.SEP.2018 09:07:15 Date: 5.SEP.2018 09:08:07 Middle channel Middle channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 15 of 37

Report No: CCISE180900401 6.4 Modulation Characteristic According to FCC § 2.1047(d), Part 22H & 24E there is no specific requirement for digital modulation, therefore modulation characteristic is not presented. 6.5 Out of band emission at antenna terminals Test Requirement: FCC part 22.917(a), FCC part 24.238(a) Test Method: ANSI/TIA-603-D 2010 Limit: -13dBm Test setup: Test Procedure: 1 The RF output of the transceiver was connected to a spectrum analyzer through appropriate attenuation. 2 The resolution bandwidth of the spectrum analyzer was set at 100 kHz when below 1GHz, 1MHz when above 1 GHz; sufficient scans were taken to show the out of band Emissions if any up to 10th harmonic. 3 For the out of band: Set the RBW=100 kHz, VBW=300 kHz when below 1 GHz, RBW =1 MHz, VBW=3 MHz when above 1 GHz, Start=30MHz, Stop= 10th harmonic. 4 Band Edge Requirements: In the 1 MHz bands immediately outside and adjacent to the frequency block, a resolution bandwidth of at least 1 percent of the emission bandwidth of the fundamental emission of the transmitter may be employed to measure the out of band Emissions. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 16 of 37

Report No: CCISE180900401 Test plots as follows (Spurious emission): GSM 850 Lowest Channel * RBW 100 kHz Marker 1 [T1 ] * RBW 1 MHz Marker 1 [T1 ] * VBW 300 kHz -28.43 dBm * VBW 3 MHz -26.48 dBm Ref 40 dBm * Att 40 dB SWT 100 ms 670.200000000 MHz Ref 30 dBm * Att 30 dB SWT 160 ms 1.640000000 GHz 40 Offset 10 dB 30 Offset 10 dB Marker 2 [T1 ] -23.89 dBm A 2.472000000 GHz A 30 20 1 PK 1 PK MAXH MAXH 20 10 LVL LVL 10 0 0 -10 D1 -13 dBm -10 -20 2 D1 -13 dBm 1 3DB 3DB -20 -30 1 -30 -40 -40 -50 -50 -60 -60 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 800 MHz/ Stop 9 GHz Date: 5.SEP.2018 09:13:05 Date: 5.SEP.2018 09:15:25 30MHz~1GHz 1GHz~9GHz Middle channel * RBW 100 kHz Marker 1 [T1 ] * RBW 1 MHz Marker 1 [T1 ] * VBW 300 kHz -28.69 dBm * VBW 3 MHz -26.03 dBm Ref 40 dBm * Att 40 dB SWT 100 ms 786.600000000 MHz Ref 30 dBm * Att 30 dB SWT 160 ms 1.672000000 GHz 40 Offset 10 dB 30 Offset 10 dB Marker 2 [T1 ] -25.06 dBm A 2.504000000 GHz A 30 20 1 PK 1 PK MAXH MAXH 20 10 LVL LVL 10 0 0 -10 D1 -13 dBm -10 -20 D1 -13 dBm 2 1 3DB 3DB -20 -30 1 -30 -40 -40 -50 -50 -60 -60 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 800 MHz/ Stop 9 GHz Date: 5.SEP.2018 09:13:21 Date: 5.SEP.2018 09:16:12 30MHz~1GHz 1GHz~9GHz Highest Channel * RBW 100 kHz Marker 1 [T1 ] * RBW 1 MHz Marker 1 [T1 ] * VBW 300 kHz -28.50 dBm * VBW 3 MHz -26.11 dBm Ref 40 dBm * Att 40 dB SWT 100 ms 730.340000000 MHz Ref 30 dBm * Att 30 dB SWT 160 ms 1.688000000 GHz 40 Offset 10 dB 30 Offset 10 dB Marker 2 [T1 ] -25.10 dBm A 2.536000000 GHz A 30 20 1 PK 1 PK MAXH MAXH 20 10 LVL LVL 10 0 0 -10 D1 -13 dBm -10 -20 D1 -13 dBm 2 1 3DB 3DB -20 -30 1 -30 -40 -40 -50 -50 -60 -60 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 800 MHz/ Stop 9 GHz Date: 5.SEP.2018 09:13:37 Date: 5.SEP.2018 09:16:44 30MHz~1GHz 1GHz~9GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 37

Report No: CCISE180900401 PCS 1900 Lowest Channel * RBW 100 kHz Marker 1 [T1 ] * RBW 1 MHz Marker 1 [T1 ] * VBW 300 kHz -24.95 dBm * VBW 3 MHz -21.58 dBm Ref 30 dBm * Att 30 dB SWT 100 ms 111.480000000 MHz Ref 30 dBm * Att 30 dB SWT 380 ms 14.946000000 GHz 30 Offset 10 dB 30 Offset 10 dB A A 20 20 1 PK 1 PK MAXH MAXH 10 10 LVL LVL 0 0 -10 -10 D1 -13 dBm D1 -13 dBm 1 -20 -20 1 3DB 3DB -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 1.9 GHz/ Stop 20 GHz Date: 5.SEP.2018 09:11:38 Date: 5.SEP.2018 09:08:56 30MHz~1GHz 1GHz~20GHz Middle Channel * RBW 100 kHz Marker 1 [T1 ] * RBW 1 MHz Marker 1 [T1 ] * VBW 300 kHz -29.42 dBm * VBW 3 MHz -20.70 dBm Ref 30 dBm * Att 30 dB SWT 100 ms 140.580000000 MHz Ref 30 dBm * Att 30 dB SWT 380 ms 13.692000000 GHz 30 Offset 10 dB 30 Offset 10 dB A A 20 20 1 PK 1 PK MAXH MAXH 10 10 LVL LVL 0 0 -10 -10 D1 -13 dBm D1 -13 dBm 1 -20 -20 1 3DB 3DB -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 1.9 GHz/ Stop 20 GHz Date: 5.SEP.2018 09:11:53 Date: 5.SEP.2018 09:09:09 30MHz~1GHz 1GHz~20GHz Highest Channel * RBW 100 kHz Marker 1 [T1 ] * RBW 1 MHz Marker 1 [T1 ] * VBW 300 kHz -25.59 dBm * VBW 3 MHz -20.73 dBm Ref 30 dBm * Att 30 dB SWT 100 ms 171.620000000 MHz Ref 30 dBm * Att 30 dB SWT 380 ms 13.654000000 GHz 30 Offset 10 dB 30 Offset 10 dB A A 20 20 1 PK 1 PK MAXH MAXH 10 10 LVL LVL 0 0 -10 -10 D1 -13 dBm D1 -13 dBm 1 -20 -20 1 3DB 3DB -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 1.9 GHz/ Stop 20 GHz Date: 5.SEP.2018 09:11:27 Date: 5.SEP.2018 09:09:41 30MHz~1GHz 1GHz~20GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 18 of 37

Report No: CCISE180900401 Band edge emission: GSM850 * RBW 3 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] * VBW 10 kHz -15.81 dBm * VBW 10 kHz -15.64 dBm Ref 30 dBm * Att 30 dB SWT 115 ms 823.966000000 MHz Ref 30 dBm * Att 30 dB SWT 115 ms 849.022000000 MHz 30 Offset 10 dB 30 Offset 10 dB A A 20 20 1 RM * 1 RM * MAXH MAXH 10 10 LVL LVL 0 0 -10 -10 D1 -13 dBm 1 D1 -13 dBm 1 -20 -20 3DB 3DB -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 Center 824 MHz 100 kHz/ Span 1 MHz Center 849 MHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 09:05:53 Date: 5.SEP.2018 09:06:23 Lowest channel Highest channel PCS1900 * RBW 3 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] * VBW 10 kHz -19.25 dBm * VBW 10 kHz -14.72 dBm Ref 30 dBm * Att 30 dB SWT 115 ms 1.850000000 GHz Ref 30 dBm * Att 30 dB SWT 115 ms 1.910024000 GHz 30 Offset 10 dB 30 Offset 10 dB A A 20 20 1 RM * 1 RM * MAXH MAXH 10 10 LVL LVL 0 0 -10 -10 1 D1 -13 dBm D1 -13 dBm 1 -20 -20 3DB 3DB -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 Center 1.85 GHz 100 kHz/ Span 1 MHz Center 1.91 GHz 100 kHz/ Span 1 MHz Date: 5.SEP.2018 09:05:08 Date: 5.SEP.2018 09:04:41 Lowest channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 19 of 37

Report No: CCISE180900401 6.6 Field strength of spurious radiation measurement Test Requirement: FCC part 22.917(a), FCC part 24.238(a) Test Method: ANSI/TIA-603-D 2010 Limit: -13dBm Test setup: Below 1GHz Above 1GHz Test Procedure: 1. The EUT was placed on an non-conductive turntable using a non- conductive support. The radiated emission at the fundamental frequency was measured at 3 m with a test antenna and EMI spectrum analyzer. 2. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. 3. The frequency range up to tenth harmonic was investigated for each of three fundamental frequency (low, middle and high channels). Once spurious emission was identified, the power of the emission was determined using the substitution method. 4. The spurious emissions attenuation was calculated as the difference between radiated power at the fundamental frequency and the spurious emissions frequency. ERP / EIRP = S.G. output (dBm) + Antenna Gain(dB/dBi) – Cable Loss (dB) Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details. Test results: Passed Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 20 of 37

Report No: CCISE180900401 Measurement Data (worst case): GSM850 Lowest channel Spurious Emission Frequency (MHz) Limit (dBm) Result Polarization Level (dBm) 1648.40 Vertical -38.03 2472.60 V -39.21 -13.00 Pass 3296.80 V -37.80 4121.00 V -36.78 1648.40 Horizontal -41.74 2472.60 H -39.29 -13.00 Pass 3296.80 H -39.22 4121.00 H -32.59 Middle channel Spurious Emission Frequency (MHz) Limit (dBm) Result Polarization Level (dBm) 1673.20 Vertical -40.06 2509.80 V -44.99 -13.00 Pass 3346.40 V -37.19 4183.00 V -40.08 1673.20 Horizontal -39.62 2509.80 H -42.26 -13.00 Pass 3346.40 H -36.62 4183.00 H -41.78 Highest channel Spurious Emission Frequency (MHz) Limit (dBm) Result Polarization Level (dBm) 1697.60 Vertical -40.73 2546.40 V -45.88 -13.00 Pass 3395.20 V -38.37 4244.00 V -30.73 1697.60 Horizontal -41.43 2546.40 H -42.84 -13.00 Pass 3395.20 H -36.25 4244.00 H -31.56 Remark: 1. The emission levels of below 1 GHz are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 37

Report No: CCISE180900401 PCS1900 Lowest channel Spurious Emission Frequency (MHz) Limit (dBm) Result Polarization Level (dBm) 3700.40 Vertical -33.98 -13.00 Pass 5550.60 V -36.46 3700.40 Horizontal -35.61 -13.00 Pass 5550.60 H -33.63 Middle channel Spurious Emission Frequency (MHz) Limit (dBm) Result Polarization Level (dBm) 3760.00 Vertical -35.89 -13.00 Pass 5640.00 V -33.61 3760.00 Horizontal -35.87 -13.00 Pass 5640.00 H -33.92 Highest channel Spurious Emission Frequency (MHz) Limit (dBm) Result Polarization Level (dBm) 3819.60 Vertical -36.63 -13.00 Pass 5729.40 V -33.86 3819.60 Horizontal -32.78 -13.00 Pass 5729.40 H -33.12 Remark: 1. The emission levels of below 1 GHz are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 37

CCIS Report No: CCISE180900401 6.7 Frequency stability V.S. Temperature measurement Test Requirement: FCC Part 22.355, FCC Part 24.235, FCC Part 2.1055(a)(1)(b) Test Method: ANSVTIA—6—3—D 2010 Limit: +2.5 ppm CCC D—|_q SS SA Temperature & Humidity Chamber Power Source Test procedure: 1. The equipment under test was connected to an external DC power supply and input rated voltage. 2. RF output was connected to a frequency counter or spectrum analyzer via feed through attenuators. 3. The EUT was placed inside the temperature chamber. 4. Set the spectrum analyzer RBW low enough to obtain the desired frequency resolution and measure EUT 25°C operating frequency as reference frequency. 5.. Turn EUT off and set the chamber temperature to —30°C. After the temperature stabilized for approximately 30 minutes recorded the frequency. 6. Repeat step measure with 10°C increased per stage until the highest temperature of +50°C reached Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen Zhongfian Nanfang Testing Co., Ltd . Project No.: CCISE1809004 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 37

CCIS Report No: CCISE180900401 Measurement Data (th e worst channel): Reference Frequency: GSMS850 Middle channel=190 channel=836.6MHz Power supplied Frequency error (Vde) Temperature (°C) _2 ppm Limit (ppm) Result —30 199 0.237868 —20 180 0.215157 —10 175 0.209180 0 165 0.197227 3.70 10 132 0.157781 £2.5 Pass 20 104 0.124313 30 144 0.172125 40 150 0.179297 50 186 0.222328 Reference Frequency: PCS1900 Middle channel=661 channel=1880MHz se ols Temperature (°C) Frequency error Limit (ppm) Result (Vdc) Hz ppm —30 197 0.104787 —20 165 0.087766 —10 132 0.070213 0 154 0.081915 3.70 10 180 0.095745 £2.5 Pass 20 174 0.092553 30 172 0.091489 40 105 0.055851 50 106 0.056383 Note: Only the worst case shown in the report. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 37

CCIS Report No: CCISE180900401 6.8 Frequency stability V.S. Voltage measurement Test Requirement: ECC Part 22.355, FCC Part 24.235, FCC Part 2.1055(d)(2) Test Method: ANSVTIA—608—D 2010 Limit: +2.5ppm Test setup: SS I_U SA Temperature & Humidity Chamber (o———] Om Power Source Test procedure: 1. Set chamber temperature to 25°C. Use a variable DC power source to power the EUT and set the voltage to rated voltage. 2. Set the spectrum analyzer RBW low enough to obtain the desired frequency resolution and recorded the frequency. 3. Reduce the input voltage to specify extreme voltage variation (+/— 15%) and endpoint, record the maximum frequency change. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data (the worst channel): Reference Frequency: GSMS850 Middle channel=190 channel=836.6MHz Temperature (°C) Rovelsttnies Frequency error Limit (ppm) Result (Vdc) Hz ppm 4.2 80 0.095625 25 3.7 96 0.114750 £2.5 Pass 3.5 74 0.088453 Reference Frequency: PCS1900 Middle channel=661 channel=1880MHz Temperature (°C) Power supplied Frequency error Limit (ppm) Result (Vdc) Hz ppm 4.2 99 0.052660 25 3.7 86 0.045745 £2.5 Pass 3.5 71 0.037766 Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1809004 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 25 of 37


Document Created: 2018-09-21 14:42:45
Document Modified: 2018-09-21 14:42:45
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC