RF EXPOSURE P3

FCC ID: 2ABOSPLAT50

RF Exposure Info

Download: PDF
FCCID_3031386

~ 1 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.92.6.15.SATU.A Expanded Uncertainty 1s 203 % 10 g 20.1 % 6 CALIBRATION MEASUREMENT RESULTS 6.1 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Frequency, MHz 1800 1820 1840 1860 1880 1900 1920 1940 190. 1980 2000 S11, 08 Frequency (MHz) Return Loss (dB) Requirement (dB) Impedance 1900 —33.77 —20 49.9 52 — 2.0 jC2 6.2 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Frequency. MHz 1800 1820 1840 1eso 180 1900 1920 1940 190 1980 2000 an— Frequency (MHz) Return Loss (dB) Requirement (dB) Impedance 1900 —27.04 —20 45.8 Q — 1.5 02 Page: 6/12 This document shall not be reproduced, except infull or in part, without the written approval ofMVG The information contained herein isto be used onlyfor thepurpose for whichit is submitted and is not to be released in whole orpart without writien approval ofMVG

~ 1 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.92.6.15.SATU.A 6.3 MECHANICAL DIMENSIONS Frequency MHz L mm h mm d mm required measured required measured required measured 300 420.0 1 %. 250.0 1 %. 6.35 +1 %. 450 290.0 21 %. 166.7 21 %. 6.35 £1 %. 750 176.0 +1 %. 100.0 +1 %. 6.35 +1 %. 835 161.0 #1 %. 89.8 21 %. 3.6 £1%. 900 149.0 +1 %. 83.3 +1 % 3.641%. 1450 89.1 21 %. 51.7 41 %. 3.6 21 %. 1500 80.5 +1 %. 50.0 #1 %. 3.6:1%. 1640 79.0 £1%. 45.7 21 %. 3.6+1%. 1750 75.2 41 %. 42.9 21 %. 3.6 21 %. 1800 72.0 1 %. 41.7 +1 % 3.6+1%. 1900 68.0 +1 %. pass 39.5 #1 %. PaS$ 3.6:1%. PASS 1950 66.3 +1 %. 38.5 +1 %. 3.6+1%. 2000 64.5 41 %. 37.5 41 % 3.641%. 2100 61.0 £1 %. 35.7 +1 % 3.6£1%. 2300 55.5 41 %. 32.6 +1 % 3.6+1%. 2450 51.5 41 %. 30.4 +1 %. 3.6£1%. 2600 48.5 +1 %. 28.8 +1 % 3.6+1%. 3000 41.5 41 %. 25.0 #1 %. 3.6 £1 %. 3500 37.0£1%. 264 +1 %. 3.6 £1%. 3700 34.721%. 264 21 %. 3.6 £1%. 7 VALIDATION MEASUREMENT The IEEE Std. 1528, FCC KDBs and CEVIEC 62209 standards state that the system validation measurements must be performed using a reference dipole meeting the fore mentioned return loss and mechanical dimension requirements. The validation measurement must be performed against a liquid filled flat phantom, with the phantom constructed as outlined in the fore mentioned standards. Per the standards, the dipole shall be positioned below the bottom ofthe phantom, with the dipole length centered and parallel to the longest dimension of the flat phantom, with the top surface ofthe dipole at the described distance from the bottom surface of the phantom. 7.1 HEAD LIQUID MEASUREMENT F'e;'fz"“’ Relative permittivity (€‘) Conductivity (0) 5/m required measured required measured 300 45.3 15 % 0.87 25 % 450 43.5 25 % 0.87 £5 % Page: 7/12 This document shall not be reproduced, except infull or in part, without the written approval ofMVG The information contained herein is to be used onlyfor thepurpose for whichit is submitted and is not to be released in whole orpart without writien approval ofMVG

SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.92.6.15.SATU.A 750 41.9 25 % 0.89 +5 % 835 41.5 25 % 0.90 £5 % 900 41.5 15 % 0.97 +5 % 1450 40.5 25 % 120 25 % 1500 40.4 15 % 1.23£5% 1640 40.2 25 % 13125 % 1750 40.1 25 % 1.37 25 % 1800 40.0 25 % 14025 % 1900 40.0 25 % PASS 14025 % PASS 1950 40.0 15 % 14025 % 2000 40.0 25 % 14025 % 2100 39.8 25 % 1.49 25 % 2300 39.5 25 % 1.67 25 % 2450 39.2 25 % 1.80 25 % 2600 39.0 25 % 1.96 25 % 3000 38.5 25 % 2.40 £5 % 3500 37.9 25 % 2.91 45 % 7.2 SAR MEASUREMENT RESULT WITH HEAD LIQUID The IEEE Std. 1528 and CEUIEC 62209 standards state that the system validation measurements should produce the SAR values shown below (for phantom thickness of 2 mm), within the uncertainty for the system validation. All SAR values are normalized to 1 W forward power. In bracket, the measured SAR is given with the used input power. Software OPENSAR V4 Phantom SN 20/09 SAMT Probe SN 18/11 BPG122 Liquid Head Liquid Values: eps® 40.9 sigma : 1.43 Distance between dipole center and liquid 10.0 mm Area scan resolution dx=8mm/dy=8mm Zoon Scan Resolution dx=8mm/dy=8m/dz=5mm Frequenc 1900 MHz Input power 20 dBm Liquid Temperature 21°C Lab Temperature 21 °C Lab Humidity 45 % F"’;‘fz"“’ 1 g SAR (W/ke/W) 10 g SAR (W/ke/w) required measured required measured 300 2.85 194 450 4.58 3.06 750 8.49 5.55 Page: 8/12 This document shall not be reproduced, except infull or in part, without the written approval ofMVG The information contained herein is to be used onlyfor thepurpose for whichit is submitted and is not to be released in whole orpart without writien approval ofMVG

~ 1 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.92.6.15.SATU—A 16 16.8 18.4 19.3 20.1 30.37 (3.94) 20.5 20.51 (2.05) 20.9 14 219 233 24 2600 3000 3500 uks fie vew ns / 3 se soo runtna 459 Catkes $1 8 an 20 we )( 4 10 oo . mm T ster 3 viea db a fr m 2indt a 2 a s a 4 7.3 BODY LIQUID MEASUREMENT Fehent Relative permittivity (€) Conductivity (0) 5/m required measured required measured 150 61.9 15 % 0.80 25 % 300 58.2 15 % 0.92 25 % 450 56.7 25 % 0.94 25 % 750 55.5 45 % 0.96 £5 % 835 55.2 45 % 0.97 25 % 900 55.0 45 % 1.05 25 % 915 55.0 15 % 1.0625% Page: 9/12 This document shall not be reproduced, except infull or in part, without the written approval ofMVG The information contained herein isto be used onlyfor thepurpose for whichit is submitted and is not to be released in whole orpart without writien approval ofMVG

~ 1 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.92.6.15.SATU—A 1450 54.0 25 % 1.30£5% 1610 53.8 45 % 1.40£5% 1800 53.3 45 % 1.525% 1900 53.3 45 % Pass 1.5245% pass 2000 53.3 15 % 1.5225% 2100 53.2 45 % 1.62+5% 2450 52.7 45 % 1.95£5% 2600 52.5 15 % 21625 % 3000 52.0 45 % 27345 % 3500 51.3 45 % 3.3125% 5200 49.0£10% 5.30£10% 5300 48.9£10% 5.42:10% 5400 48.7 £10% 5.53210% 5500 48.6 210 % 5.65 £10% 5600 48.5 £10% 5.77210% 5800 48.2£10% 6.00 £10% 74 SAR MEASUREMENT RESULT WITH BODY LIQUID Software OPENSAR V4 Phantom SN 20/09 SAM7I Probe SN 18/11 BPG122 Liquid Body Liquid Values: eps‘ 53.9 sigma 1.55 Distance between dipole center and liquid 10.0 mm Area scan resolution dx—8mm/dy—8mm Zoon Scan Resolution dx=8mm/dy=8m/dz=5mm Frequenc 1900 MHz Input power 20 dBm Liquid Temperature 21 °C Lab Temperature °o Lab Humidity 45.% nexs 18 SAR (W/ke/w) 10 g SAR (W/ke/w) measured measured 1900 38.58 (3.96) 20.37 (2.04) Page: 10/12 This document shall not be reproduced, except infull or in part, without the written approval ofMVG The information contained herein is to be used onlyfor thepurpose for whichit is submitted and is not to be released in whole orpart without writien approval ofMVG

~ 1 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.92.6.15.SATU.A uce taind ons $am § 30 B x osr— . T Kter 3— vien 6 fr Smd ud a 2 A 6 a b Page: 11/12 This document shall not be reproduced, except infull or in part, without the written approval ofMVG The information contained herein isto be used onlyfor thepurpose for whichit is submitted and is not to be released in whole orpart without writien approval ofMVG

mvGo SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.92.6.15.SATU.A 8 LIST OF EQUIPMENT Equipment Summary Sheet Equipment Manufacturer / Identification No: Current Next Calibration Description Model *| Calibration Date Date BAM Phantom mvo SN—20/09—SAM71 alidated. No cal alidated. No cal required. required. COMOSAR Test Bench versiona NA alidated. No cal alidated. No cal required. required. Network Analyzer Rhode8Schwarz sN100132 o22013 o22016 Calipers Carrera CALIPER—01 1272013 122016 Reference Probe MVG EPG122 SN 18711 10/2014 10/2015 Multimeter Keithley 2000 1188656 12/2013 1212016 Signal Generator Agilent E4438C MY49070581 12/2013 1212016 : Characterized prior to |Characterized prior to Ampiie: Aeifieisomes $~94s test. No cal required. Jtest. No cal required. Power Meter HP E4418A US38261498 12/2013 1212016 Power Sensor HP ECP—E26A Uss7181460 1272013 1222016 esd y Characterized prior to |Characterized prior to Drectional Coupler Nerds 4216—20 01366 test. No cal required. Jtest. No cal required. Temperature and Humidity Sensor Control Company 11—661—9 812012 872015 Page: 12/12 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor thepurpose for which it is submitted and is not to be released in whole orpart without writien approal ofMVG

Reference No.: WTS16S0447679E V1 Page 110 of 113 16 SAR System Photos Liquid depth ≥ 15cm Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Email:info@waltek.com.cn

Reference No.: WTS16S0447679E V1 Page 111 of 113 17 Setup Photos Right Head Cheek Right Head Tilt Left Head Cheek Left Head Tilt 1.0cm separation 1.0cm separation Body-Worn(LCD UP) Body-Worn(LCD Down) Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Email:info@waltek.com.cn

Reference No.: WTS16S0447679E V1 Page 112 of 113 1.0cm 1.0cm separation separation Hotpsot(LCD UP) Hotspot(LCD Down) 1.0cm 1.0cm separation separation Hotspot(RIGHT EDGE) Hotspot(LEFT EDGE) 1.0cm separation Hotspot(BOTTOM EDGE) Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Email:info@waltek.com.cn

Reference No.: WTS16S0447679E V1 Page 113 of 113 18 EUT Photos Front side Back side Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Email:info@waltek.com.cn


Document Created: 2016-06-15 16:02:31
Document Modified: 2016-06-15 16:02:31
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC