Label and Location

FCC ID: 2ABLP-VSC100

ID Label/Location Info

Download: PDF
FCCID_2261610


8 7 6 5 4 3 2 1 REVISIONS (ALL SHEETS AT SAME REVISION) REV DESCRIPTION DATE NOTES: 001 RELEASE PER REQ-057316 2013-12-19 1. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5-2009. 2. MATERIAL: 2.1 BASE STOCK, BRADY LABEL P/N B33-17-428 (POLYESTER, THERMAL TRANSFER PRINTABLE, MATTE SILVER, 2"X1"X.003") D 2.2 INK: BRADY LABEL P/N B30-R6000 (BLACK THERMAL TRANSFER RIBBON) D 2 1 3. LABEL TEXT AND GRAPHICS TO BE BLACK AND OPAQUE, AND PLACED APPROXIMATELY WHERE SHOWN. 4. ALL CHARACTERS SHALL USE FONT TYPE TAHOMA, HEIGHT TO BE .060 INCHES MINIMUM. LINEAR BAR CODES SHALL BE CODE 128 PER ANSI/AIM BC1-1995, 2.000 WIDTH RATIO 1:2. 8 5. PART NO.: POPULATE "YYYYYYY" WITH APPLICABLE VIASAT PART NUMBER AS SHOWN IN AGILE. POPULATE "XXX" WITH APPLICABLE REVISION OF "YYYYYYY" ASSEMBLY AS INDICATED IN AGILE. 6. LINEAR BARCODE SHALL CONTAIN THE FOLLOWING INFORMATION: 4 YYYYYYYXXX WHERE YYYYYYY AND XXX ARE DETERMINED PER NOTE 5. 7. S/N: POPULATE SSSSSSS WITH SEVEN-DIGIT MODULE SERIAL NUMBER, AS DETERMINED AT TIME OF MANUFACTURE. BARCODE SHALL CONTAIN SAME DATA. 7 8. VIASAT LOGO SHALL BE GENERATED USING THE 2D ELECTRONIC DATA 5 ATTACHED IN AGILE. 1.000 C 9. IDENTIFY LABEL WITH LABEL PART NUMBER AND REVISION. DO NOT MARK C PART. BAG AND TAG. 6 10. PACKAGE LABEL TO ENSURE PROTECTION FROM CONTAMINATION AND DAMAGE RESULTING FROM HANDLING, STORAGE, OR SHIPPING. IDENTIFICATION SHALL BE PER NOTE 9. 2X .082 .090 1.008 .902 B B SEE SEPARATE PARTS LIST(S) PART NO: 1182859 A ENVIRONMENTAL COMPLIANCE MANUFACTURING FILES PROPRIETARY NOTICE THESE DRAWINGS, LISTS OR SPECIFICATIONS ARE THE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND APPLY AFTER FINISH PROJECT Corona 1388 N. TECH BLVD SUITE 1 A OR PLATING. TOLERANCES ARE: DRAWN DATE GILBERT, AZ 85233 CONFIDENTIAL INFORMATION AND/OR TRADE SECRETS OF FINISHED PART TO BE RoHS AND REACh COMPLIANT PER EU DIRECTIVE 2002/95/EC AND EU REGULATION 1907/2006 AND SHALL NOT USE OZONE DEPLETING SUBSTANCES PER US REGULATORY DESCRIPTION FILENAME VIASAT, INC., AND ISSUED IN STRICT CONFIDENCE. EXCEPT AS AUTHORIZED BY VIASAT IN WRITING, THESE DRAWINGS, .X .XX .XXX NON-DIM ANGULAR N. WELBORNE 2013-12-19 REQUIREMENTS. FABRICATOR SHALL ADD A UNIQUE PERMANENT IDENTIFICATION MARK IN SHEET METAL: ± .1 ± .03 ±.010 ±.010 ± .5° DESCRIPTION LISTS OR SPECIFICATIONS SHALL NOT BE REPRODUCED, ACCORDANCE WITH E-QAPP PR000608 “FABRICATOR FACILITY MARKING”. MATERIAL DECLARATIONS FOR RoHS AND REACH(SVHC'S) SHALL BE PROVIDED AND UPDATED AS NEEDED IN ACCORDANCE 2D DXF FILE 1182859_REV001.DXF RETRANSMITTED, USED FOR THE DESIGN, MANUFACTURE OR SALE OF EQUIPMENT OR USED FOR ANY OTHER PURPOSE MACHINING: ± .1 ± .01 ±.005 ±.005 ± .5° LABEL, VSC MODULE, PRE- PRODUCTION, 2"X1" WITH THE REQUIREMENTS OF PR000608. REACH SVHC DECLARATION UPDATES SHALL BE OTHER THAN EVALUATION. HOLE DIAMETER FORWARDED TO: Compliance-ProductEnvironmental@viasat.com 2D DRAWING 1182859_REV001.PDF .000-.250 .251-.500 .501-1.000 ELECTRONIC APPROVALS THIRD ANGLE PROJECTION +.004 +.006 +.010 ON FILE IN AGILE -.001 -.001 -.001 SIZE CAGE CODE DRAWING NO. REV THIS TECHNICAL DATA IS SUBJECT TO THE UNITED STATES EXPORT ADMINISTRATION MAX SURFACE ROUGHNESS 125 MICROINCHES RMS ON ALL MACHINED SURFACES D 48EU8 1182859 001 REGULATIONS. DIVERSION CONTRARY TO U.S. LAW IS PROHIBITED. CAD GENERATED DRAWING: SOLIDWORKS SCALE:NONE SHEET 1 OF 1 8 7 6 5 4 3 2 1


Document Created: 2014-05-08 14:45:09
Document Modified: 2014-05-08 14:45:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC