User Manual

FCC ID: 2ABHA0066

Users Manual

Download: PDF
FCCID_4316205

55mm GETTING STARTED CHARGING YOUR CASE CHARGING YOUR EARBUDS MONO MODE TRUE WIRELESS EARBUDS 1 Micro USB charging port 4 Left earbud LED indicator — Charge on the go charging case, with the included micro (SINGLE EARBUD USE) 2 Charging Case LED indicators 5 Left control button USB cable for 2-3 hours. Do not charge longer than suggested time. Do not charge overnight. 3 Charging Case Power Button 6 Right earbud LED indicator 7 Right control button — When LED is illuminated solid red battery case is fully charged. L Left Earbud / R Right Earbud Pause/Play/Answer Call/End Call, Next Track 70mm R L — Place Right and Left Earbuds in battery case charging cradle — Remove earbud from charging cradle 7 5 and press the power button on the battery case (3) power on by pressing the control button 6 4 — Charging case LED indicator will illuminate Blue and the or (5) for 3 seconds depending on whic earbud LED indicators (4, 6) will illuminate Red, indicating that earbud your using. 1 the earbuds are charging properly. When Earbuds LEDs (4, 6) — Once earbud is powered on, proceed QUICK START GUIDE 2 Charging LED Indicators turn solid blue, earbud batteries are fully charged. 3 Flashing RED- Battery Case is charging Solid BLUE- Battery Case is charging earbuds — After earbuds are fully charged, press the charging case power Solid RED- Battery Case is fully charged OFF- Battery Case is off button (3) to turn the charging case OFF. FCC ID : 2ABHA0066 Front STEREO MODE PAIRING OPERATING BLUETOOTH EARBUDS Note:This equipment has been tested and found to comply with (DUAL EARBUD USE) Function Operation the limits for a class B digital device,pursuant to Part 15 of the Power On Press (5) or (7) for 3 seconds FCC Rules. These limits are designed to provide reasonable — Enable Bluetooth search mode on Power Off Press (5) or (7) for 5 seconds protection against harmful interference in a residential installation. your mobile device and search for Play/Pause Single press (5) or (7) This equipment generates uses and can radiate radio frequence pairing name “CPP-4635 ” and select Answer Single press (5) or (7) energy and, if not installed and used in accordance with the — Remove both earbuds from charging it on your mobile phone. Once the instructions,may cause harmful interference to radio cradle and place them in your ears. Reject Press (5) or (7) for 2 seconds earbuds are successfully communications.However,there is no guarantee that interference TWS-i7 paired a notification will Earbuds LED indications (4) & (6) will not accor in a particular installation.if this equipmemt does — Make sure Bluetooth Search Mode is turned sound . Power On Red and Blue LED will flash altemately cause harmful interference to radio or television reception, which off on your mobile device. can be determined by turning the equipment off and on,the user is — Now you can enjoy your true Two earbuds paired each other successfully One earbud will flash red and blue, and the other earbud will flash blue only. encouraged to try to correct the interference by one or more of the wireless Bluetooth Earbuds. Paired Successfully Flashing Blue following measures: — Hold the right earbud button (7) for 3 • Reorient or relocate the receiving antenna. Power Off LED Off seconds and then press left earbud button Earbuds in Cradle • Increase the separation between the equipment and receiver. (5) for 3 seconds until they are powered on. Charging Solid Red • Connect the equipment into an autlet on a circuit different from (Earbud LEDs will flash Red and Blue to Fully Charged Solid Blue that to which the receiver is connectec. indicate that they are in Link mode.) • Consult the dealer or an experienced radio/TV technician for help. Charging Case See CHARGING YOUR CASE The device has been evaluated to meet general RF exposure — Earbuds will automatically link together after *Note: Once earbuds have been initially paired successfully with requirement. your mobile device they will automatically pair the next time a few seconds,and earbuds will have a tone, they are powered on. FCC STATEMENT The devicecan be used in portable exposure condition without restriction. One earbud will flash red and blue,and the This device complies with Part 15 of the FCC Rules. Operation is other earbud will flash blue only. The Bluetooth® word mark and logos are registered trademarks Model: CT04001 subject to the following two conditions: (1)This device may not cause harmful interference, and owned by Bluetooth SIG, Inc. and any use of such marks by — Once Earbuds are linked together you may Item No.: CPP-4635 (2)This device must accept any interference received, (ShenZhen C-Star Electronic Tech. Co., Ltd.) is under license. Other proceed to pairing with your mobile device. Capacity(Cradle): 350mAh / 3.7V (1.295Wh) trademarks and trade names are those of their respective owners. including interference that may cause undesired operation. Capacity(Earbuds): 50mAh /3.7V (0.185Wh) Input of earbuds: 5V / 60mA Warning: Input of Cradle: 5V / 300mA Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Back


Document Created: 2019-06-12 15:31:33
Document Modified: 2019-06-12 15:31:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC