User Manual

FCC ID: 2ABHA0059

Users Manual

Download: PDF
FCCID_4277721

MONO MODE GETTING STARTED CHARGING YOUR EARBUDS TRUE WIRELESS EARBUDS 1 Micro USB charging port 4 Left earbud LED indicator (SINGLE EARBUD USE) 2 Charging Case LED indicators 5 Left control button 3 Charging Case Power Button 6 Right earbud LED indicator （For checking power only) 7 Right control button Left Earbud / Right Earbud Pause/Play/Answer Call/End Call — Remove earbud from charging case R L — Once earbud is powered on, It will automatically proceed to PAIRING 7 5 STEREO MODE Insulating trip (DUAL EARBUD USE) — Remove both earbuds from charging case and close each other 1 3 6 4 — Please remove the insulating trip before charging earbuds. — Earbuds will automatically link together after a few seconds, and earbuds will have a tone 2 — Place Right and Left Earbuds in charging case One earbuds will flash red and blue, — Charging case LED indicator (2) will illuminate Blue and the another earbuds will flash blue only. CHARGING YOUR CASE earbud LED indicators (4, 6) will illuminate Red, indicating that Note: Please doule press the control button of one earbuds to make both QUICK START GUIDE — Charge the charging case, with the included micro the earbuds are charging properly. When Earbuds LEDs (4, 6) earbuds pairing each other if they still not USB cable for 2 hours. The LED indicator will be lit red during turns off, earbud batteries are fully charged. paired automatically after 20 seconds. charging and turned off after fully charged — Once Earbuds are linked together you may Do not charge longer than suggested time. Do not charge overnight. FCC ID: 2ABHA0059 proceed to pairing with your mobile device. PAIRING OPERATING BLUETOOTH EARBUDS FCC STATEMENT • Consult the dealer or an experienced radio/TV technician for help. Model: SL319 This device complies with Part 15 of the FCC Rules. Operation is The device has been evaluated to meet general RF exposure Item No.: XXXX subject to the following two conditions: requirement. The devicecan be used in portable exposure — Enable Bluetooth search mode on Capacity(Cradle): 350mAh / 3.7V (1.295Wh) (1)This device may not cause harmful interference, and condition without restriction your mobile device and search for Capacity(Earbuds): 50mAh / 3.7V (0.185Wh) (2)This device must accept any interference received, including pairing name “ Tempo Earbuds ” Input: 5V/60mA (Earbuds) interference that may cause undesired operation. and select it on your mobile phone. Input: 5V/300mA (Cradle) Once the earbuds are successfully Warning: TWS-i7 paired, a notification will Function Operation Changes or modifications not expressly approved by the party sound . Press (5) or (7) for 3 seconds or responsible for compliance could void the user's authority to — Now you can enjoy your true Power On remove the earbuds from operate the equipment. wireless Bluetooth Earbuds. charging case Note:This equipment has been tested and found to comply with Press (5) or (7) for 3 seconds or the limits for a class B digital device,pursuant to Part 15 of the Power Off place the earbuds in the charging case FCC Rules. These limits are designed to provide reasonable Play/Pause Single press (5) or (7) protection against harmful interference in a residential installation. Answer Single press (5) or (7) This equipment generates uses and can radiate radio frequence Reject Press (5) or (7) for 2 seconds energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio Earbuds LED indications (4) & (6) communications.However,there is no guarantee that interference Power On Red and Blue LED will flash altemately will not accor in a particular installation.if this equipmemt does Link Mode Flashing Blue + Red cause harmful interference to radio or television reception,which *Note: Once earbuds have been initially paired successfully with can be determined by turning the equipment off and on,the user is Paired Successfully Flashing Blue your mobile device, they will automatically pair the next time encouraged to try to correct the interference by one or more of the Power Off LED Off they are powered on. following measures: Earbuds in Cradle Charging Solid Red • Reorient or relocate the receiving antenna. Fully Charged • Increase the separation between the equipment and receiver. LED off • Connect the equipment into an autlet on a circuit different from Charging Case See CHARGING YOUR CASE that to which the receiver is connectec. Made in China


Document Created: 2019-05-10 16:16:11
Document Modified: 2019-05-10 16:16:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC