User Manual

FCC ID: 2ABHA0012

Users Manual

Download: PDF
FCCID_3201014

Bluetooth earbuds Charging the Headset: Recommend to charge the built-in battery fully before using the headset for the first time. 2. The headset (CT15211) Bluetooth devices could not be found. 1. Connect the headset with PC/Laptop/Mac or any 5V USB adapter (not included) with the USB cable provided. Please make sure that the headphone is in pairing mode. 2. Red LED turns ON during charging, turns OFF after fully charged. Press the button “Play/Pause” for about 4 seconds until the red and blue lights start flashing alternately. 3. Unplug USB cable after fully charged, it takes about 1H to fully charge the headset. General guidelines: Power On/OFF : Keep away from high temerature or prolonged exposure to direct sunlight. 1. Hold the button "Play/Pause" for about 3 seconds until the red and blue light is flashing. Avoid contact with liquids. 2.Hold the button "Play/Pause" for 3 seconds to turn off, the light indicator then goes off. Do not disassemble. Do not drop the product. Pairing : Keep out of reach of children. 1. Press the button “Play/Pause” for about 4 seconds until the red and blue lights start flashing alternately. 2. Turn on the Bluetooth function of your smartphone. FCC Statement 3. Search for the Bluetooth devices and select “CT15211”. This equipment has been tested and found to comply with the limits for a Class B Light indicator 4. The Bluetooth headset will pair automatically. digital device, pursuant to part 15 of the FCC rules. These limits are designed to 5. If paring is successful, blue light indicator starts flashing. provide reasonable protection against harmful interference in a residential installation. Remark: You need to pair the Bluetooth headset to your smartphone for the first time. The headset This equipment generates, uses and can radiate radio frequency energy and, if not will connect to your smartphone automatically the next time when you turn it on. installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not Answering a call occur in a particular installation. If this equipment does cause harmful interference to For iPhone users: radio or television reception, which can be determined by turning the equipment off Selection 1. Press the button “Play/Pause” of the headset. and on, the user is encouraged to try to correct the interference by one or more of the Selection 2. Press the “Answer” button of your iPhone and check your iPhone call menu. Look for the (Audio following measures: Source) and select the headset “CT15211” -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. For Android User: -Connect the equipment into an outlet on a circuit different from that to which the Selection 1. Press the button “Play/Pause” of the headset. receiver is connected. Selection 2. Press the “Answer” button of your phone. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly Ending a call approved by the party. Press the button “Play/Pause”. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to Rejecting a call computer or peripheral devices). Press the button “Play/Pause” for 2 seconds, then release. This equipment complies with Part 15 of the FCC Rules. Operation is subject to Built-in Mic the following two conditions: Redialing the last called number (1) This device may not cause harmful interference, and Double press the button “Play/Pause”. (2) This device must accept any interference received, including interference that may cause undesired operation. Playing music RF warning statement: Product Specifications When you are listening to the music, you can press the buttons “Play, Pause, Previous Song, Next song” to The device has been evaluated to meet general RF exposure requirement. The . CT15211 select your optimal performance and control the volume. device can be used in portable exposure condition without restriction. . Up to 90 minutes of playback time 1. Next Song: Long press the button “Next song”. . Input: DC 5V/100mA 2. Previous Song: Long press the button “Previous Song”. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. . Charging time: Approx 1-2 hours 3. Volume Up: Short press the button “Next Song”. and any use of such marks by (D026370) is under license. Other trademarks and trade names . Speaker power: 3mW 4. Volume Down: Short press the button “Previous Song”. are those of their respective owners. . Frequency response: 20Hz-20KHz Warning: Never store or use this product in temperatures below 32°F (0°C) or above 115°F . Lithium battery capacity: 55mAh Trouble Shooting (45°C). . RF range: <30 ft. of wireless range 1. The headset can’t be charged. . Bluetooth V2.1+EDR Try the other USB cable or other AC adapter. Bluetooth Listing Declaration ID:D026370 MADE IN CHINA


Document Created: 2016-11-10 16:17:19
Document Modified: 2016-11-10 16:17:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC