Modular Approval Letter

FCC ID: 2ABFD-MD1150

Cover Letter(s)

Download: PDF

FCCID_4012288

Mircom Technologies Ltd.

Date June 21, 2018
TUV SUD BABT TCB
Octagon House,
Segensworth Road,
Fareham,
Hampshire,
PO15 5RL

Modular Approval Request

FCC ID: 2ABFD-MD1150

The following attestation addresses the requirements to support modular approval:

Modular approval requirement Yes (provide brief statement) No *
(a) The radio elements must have the Yes, module has shielded radio
radio frequency circuitry shielded. elements.
Physical components and tuning
capacitor(s) may be located external
to the shield, but must be on the
module assembly
(b) The module must have buffered Yes, module uses buffered
modulation/data inputs to ensure that modulation/data inputs.
the device will comply with Part 15
requirements with any type of input
signal
(c) The module must contain power Yes, module contains power
supply regulation on the module supply regulation.
(d) The module must contain a Yes, unique antenna connector
permanently attached antenna, or used with description of antenna.
contain a unique antenna connector,
and be marketed and operated only
with specific antenna(s), per Sections
15.203, 15.204(b), 15.204(c),
15.212(a), 2.929(b)
(e) The module must demonstrate Yes, module tested in standalone
compliance in a stand-alone configuration.
configuration
(f) The module must be labelled with Yes, module is labelled with
its permanently affixed FCC ID label, required info.
or use an electronic display (See
KDB Publication 784748 about
labelling requirements)
(g) The module must comply with all Yes, module complies with
specific rules applicable to the applicable requirements, and
transmitter. The grantee must provide compliance instructions will be
comprehensive instructions to explain provided to those incorporating
compliance requirements the module into a host device.

Document Created: 2018-08-16 14:19:18
Document Modified: 2018-08-16 14:19:18

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC