RF Exposure Report

FCC ID: 2ABFD-MD1150

RF Exposure Info

Download: PDF
FCCID_4012285

Exhibit: RF Exposure – FCC (2ABFD-MD1150) Report File #: 7169001943-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Ecobee Inc Product EB-SMSWV-01 FCC Part 15 Subpart 15.247:2018 Standard(s) FCC KDB 447498:2015 RF Exposure – FCC The device is intended for use for mobile application and the minimum separation distance from the radiating structure to any part of the body or extremity of a user is greater than 20 cm as stated by the manufacturer during normal operation. Radiofrequency Radiation Exposure Evaluation This device is evaluated for Maximum Permissible Exposure (MPE) according to the MPE guidelines and limits identified in FCC section 1.1310. The limits, as defined FCC 1.1310 Table 1, “(B) Limits for General Population/Uncontrolled Exposure” was applied. The limit for the frequency range 1.5 GHz to 100 GHz is 1.0 mW/cm2. The power density formula is given by: Pd = PG / (4πR2) Where, P = Peak Antenna Conducted Power in mW G = Numeric Antenna Gain R = Separation distance in cm MPE Calculations: 2400 – 2483.5 MHz transmitter The transmitter has an antenna with 5 dBi (3.2 numerically) gain, and the maximum peak power is 3.72 mW. Pd = (3.72 mW * 3.2) / (4 * π * (20cm)2) Pd = 0.00234 mW/ cm2 Results The device passes the requirements for General Population/Uncontrolled Exposure. The calculated power density is 0.00234 mW/cm2 and this is below the 1.0 mW/cm2 limit. Page 2 of 2 Report Issued: 8/14/2018 Report File #: 7169003246-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc.


Document Created: 2018-08-14 17:04:50
Document Modified: 2018-08-14 17:04:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC