RF Exposure

FCC ID: 2ABEU-YLDP03YL

RF Exposure Info

Download: PDF
FCCID_3222045

Bay Area Compliance Laboratories Corp. (Kunshan)                                   Report No.: RKS161116002-00B

FCC§15.247 (i), §1.1310& §2.1091 –MAXIMUM PERMISSIBLE EXPOSURE
(MPE)
Applicable Standard
According to subpart 15.247(i)and subpart §1.1310, systems operating under the provisions of this section
shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in
excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

                            (B) Limits for General Population/Uncontrolled Exposure
   Frequency Range          Electric Field          Magnetic Field         Power Density         Averaging Time
        (MHz)              Strength (V/m)             Strength (A/m)           (mW/cm2)            (minutes)
       0.3-1.34                     614                     1.63                 *(100)                  30
        1.34-30                    824/f                   2.19/f               *(180/f²)                30
        30-300                     27.5                    0.073                   0.2                   30
       300-1500                      /                                           f/1500                  30
     1500-100,000                    /                                             1.0                   30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.

Calculated Formulary:

Predication of MPE limit at a given distance
S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);

Calculated Data:

                                                                                 Evaluation    Power          MPE
            Frequency        Antenna Gain                 Output Power
  Mode                                                                            Distance     Density        Limit
              (MHz)        (dBi)           (numeric)    (dBm)          (mW)         (cm)      (mW/cm2)    (mW/cm2)
 802.11b       2412          2.2             1.66         22           158.49        20        0.0523          1
 802.11g       2412          2.2             1.66         24           251.19        20        0.0829          1
 802.11n
               2462          2.2             1.66         23           199.53        20        0.0659          1
  HT20

Note: The target output power:
      802.11b: 21±1dBm, which declared by the Manufacturer.
      802.11g: 23±1dBm, which declared by the Manufacturer.
      802.11n HT20: 22±1dBm, which declared by the Manufacturer.

Result: The device meet FCC MPE at 20 cm distance




FCC Part 15.247                                                                                     Page 9 of 49



Document Created: 2017-12-19 02:14:13
Document Modified: 2017-12-19 02:14:13

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC