User Manual

FCC ID: 2ABES-ULTRA8

Users Manual

Download: PDF
FCCID_2624292

               Ultra8 Usermanual




The camera head maybe flipped up and downly the connecting

hinge. It can also rotate 90° counter clockwise or 270°

clockwise along the connecting hinge.

Note: When rotating or flipping the camera head, do not force

the camera head in any direction if there is resistace.


    &           Power               A         UP
    C           Rotate 180°         ¢         Left
    &           Snap Shot           >         Right
    on          Record              w         Down
     11         Freeze              ®         Zoom In
                Focus               0         Zoom Out
   &            Focus Lock


Electronic specification

     1. Operation Voltage:   3.0V

     2. Voltage range: 2.4V—3.6V

     3. Operation current: <30mA

     4. Standby current:: <30uA

     5. Frequency: 2403—2480MHz




                                        HoverCam:


For Your Safety
To prevent damage to yourself or to others, read the following safety precautions in
their entirety before using this product. Keep these safety instructions where all those
who use the product will read them. The consequences that could result from failure
to observe the precautions listed in this

WARNINGS

Do not disassemble.
Failure to observe this precaution could result in fire, electric shock, or other injury.
Should the product break open as the result of a fall or other accident, remove the
batteries.
Keep out of reach of children.
Failure to observe this precaution could result in injury. In addition, note that small
parts constitute a choking hazard. Should a child swallow any part of this product,
consult a physician immediately.
Cut power immediately in the event of malfunction.
Should you notice smoke or an unusual smell coming from the product, immediately
turn the product off . Continued operation could result in injury. Once the product has
cooled, remove the batteries and take the product to a Nikon-authorized service
representative for inspection.
Do not use in the presence of flammable gas.
 Failure to observe this precaution could result in explosion or fire.
Keep dry.
Do not immerse in or expose to water or rain. Failure to observe this precaution could
result in fire or electric shock.
Do not expose to high temperatures.
Do not leave the product in a closed vehicle under the sun or in other areas subject to
extremely high temperatures. Failure to observe


Federal Communications Commission (FCC) Interference

Statement

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules.



These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generate, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:



 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that

to which the receiver is   connected.

 Consult the dealer or an experienced radio/TV technician for help.


This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may

cause undesired operation.



FCC Caution: Any changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to

operate this equipment.



RF exposure warning



This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment.

This equipment must not be collocated or operating in conjunction with

any other antenna or transmitter.



Document Created: 2015-05-22 15:11:32
Document Modified: 2015-05-22 15:11:32

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC