MPE Report

FCC ID: 2ABES-KR1409

RF Exposure Info

Download: PDF
FCCID_3373981

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE152238 Page: 1 of 3 Maximum Permissible Exposure Evaluation FCC ID: 2ABES-KR1409 1. Client Information Applicant : Pathway Innovations and Technologies, Inc. Address : 10211 Pacific Mesa Blvd., #412, San Diego, CA 92121, USA Manufacturer : ShenZhen KerunVisual Technology Co., Ltd. Address : 6/F, Building 2, Zone S2, 1213 Liuxian Blvd Honghualing Industrial Park Nanshan District, Shenzhen City, China 2. General Description of EUT EUT Name : Home base unit Models No. : S921, MT200-HBU, MT200XF Model : All these models are identical in the same PCB, layout and electrical Difference circuit, the only difference is model name for commercial. Frequency Bands: Bluetooth V4.0(BLE): 2402~2480 MHz 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz Product Max Peak Output Power: 802.11b: 16.54 dBm : 802.11g: 15.45 dBm Description 802.11n (HT20): 14.37 dBm 802.11n (HT40): 14.25 dBm BLE: 3.329 dBm Antenna Gain: 4.5dBi FPC Antenna Power Supply : AC/DC Adapter (TDX-0902000): Input: AC 100~240V, 50/60Hz, 0.6A. Output: DC 9V, 2.0A. Connecting I/O : Please refer to the User's Manual Port(S) Note: More test information about the EUT please refer the RF Test Report. TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE152238 Page: 2 of 3 MPE Calculations for GSM 1. Antenna Gain: BLE: 4.5 dBi FPC Antenna 802.11b/g/n(HT20)/n(HT40): 4.5 dBi FPC Antenna 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Power Worst Conducted Max tune up power Density Turn-up Power ANT Power (dBm) Distance 2 (dB) Gain (mW/ cm ) (dBm) [P] (cm) (dBi) [S] [R] 802.11 802.11 802.11 [G] 802.11 BLE BLE BLE BLE Sum b/g/n b/g/n b/g/n b/g/n 16.54 3.329 16±1 3±1 17 4 4.5 20 0.0281 0.0012 0.0293 Note: (1) NTX= Number of Transmit Antennas RF Output power specifies that Maximum Conducted Peak Output Power. TB-RF-075-1.0

Report No.: TB-MPE152238 Page: 3 of 3 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 1500-100000MHz: The worst MPE is calculated as 0.0293 mW / cm2 < limit 1mW/cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2017-10-25 20:19:20
Document Modified: 2017-10-25 20:19:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC