Modular Approval Letter

FCC ID: 2ABCB-RPI4B

Cover Letter(s)

Download: PDF
FCCID_4325655

Raspberry Pi Trading 3 West Wing, The Maurice Wilkes Building, St John‘s Innovation Park, Cowley Road, Cambridge, CB4 ODS UK Raspberry Pi Web Trading Ltd http://raspberrypi.org 13" May 2019 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: FCC Single—Modular Approval Letter FCC ID: 2ABCB—RPI4B To whom it may concern We, Raspberry Pi Trading Ltd, hereby declare that the product, FCC ID: 2ABCB—RPI4B, has met the single—modular approval requirements of FCC rule part §15.212(a)(1) and this is shown in the table below. Requirement Compliance: Yes or No along with a justification The radio elements must have the radio Yes, see operational description. frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module must have buffered Yes, all inputs are buffered from main modulation/data inputs to ensure that the processor to radio chip. Inputs to the board device will comply with Part 15 are buffered through USB or UART. requirements with any type of input signal The module must contain power supply Yes, the device has a 5V — 3V3 switch regulation on the module mode power supply that supplies the Radio circuitry. The module must contain a permanently Yes, antenna is built into PCB see exhibits. attached antenna, or contain a unique antenna connector, and be marketed and Registered Company Number: 8207441

operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The module must demonstrate compliance Yes, system is fully functional without any in a stand—alone configuration other equipment. The module must be labelled with its Yes, FCC ID printed on PCB, see photo permanently affixed FCC ID label, or use an exhibit. electronic display (See KDB Publication 784748 about labelling requirements) The module must comply with all specific Yes, see user guide rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee The module must comply with RF exposure Yes, see RF exposure exhibit. requirements Yours faithfully, ~ Gordon Hollingworth Director of Software


Document Created: 2019-05-13 14:53:41
Document Modified: 2019-05-13 14:53:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC