15_V6 UserMan

FCC ID: 2AB9SV6

Users Manual

Download: PDF
FCCID_4355563

In the box How to wear your TWS earbuds 1 V6 Wireless Earbuds Charging (case) 2 On-the-go Charging Case 1 Stpe 1 To Power up the charging case, simply connect it to a USB power supply via True Wireless Stereo Earbuds 3 3 Pairs of Silicone Eartips(Size S/M/L), the Micro USB Cable. The LEDs on the front of the charging case will flash V6 4 3 Pairs of Earwings(Size S/M/L), /1 Pair of Earloop when charging and all the 4 LEDs will remain on for one minute when fully charged and then all shut off. The fully charged charging case may support 5 Micro-USB Cable 4-5 recharges for both Earbuds. 6 User Manual Place the headset into the ear canal Functions Electric indicator lamp 25% of Battery copacity or less - 1/4 LEDs 50% of Battery copacity or less - 2/4 LEDs 1 MFB (multifunction button) 4 Charging Case indicator 75% of Battery copacity or less - 3/4 LEDs 2 Indicator light 100% of Battery copacity or less - 4/4 LEDs 2 Stpe 2 1 2 4 3 Charging contact point 5 Micro USB charging port Adjust the earbuds by rotating it back and forth to feel more stable and comfortable. HIGH FIDELITY SOUND 3 5 Combining dynamic speakers for wireless music enjoyment 3 5 2 Mono mode for left earbud: Charging (earbuds) Turn off: Take the left earbud out of the charging case, it will power on automatically. Specification Method 1: Put the earbuds back into the charging case, they will turn off Quick Double press the multifunction button on earbud to enter paring mode. Bluetooth version V5.0 To charge the earbuds, simply place them into the automatically. Enable Bluetooth on your device and search for "V6 L", tap to connect.If the left Music paly time 3.5 hours charging case(Ensure two earbuds are placed in Method 2: When the earbuds is power on, press and hold the earbud has been used as Mono mode last time,it will connect with your last Talk time 3 hours corresponding slot). The LEDs on both earbuds turning red indicate earbuds are multi-function button on either earbud for 5 seconds. (LEDs on both connected device automatically once it enter paring mode. Standby time 100 hours under charging status and then shut off when fully charged. earbuds will keep red for 1 second) Effective distance Up to 3.6ft./12m Mono mode for both earbuds Bluetooth profiles HFP/ A2DP/AVRCP/HFP Note: Please charge the earbuds and the charging case Note: If you turn one of the earbud off while both earbuds are paired with at the same time: Driver 6mm once at least every 3 months if you do not use the Take both earbuds out of the charging case, quick triplepress the multi-function Sound pressure level 98±3dB earbuds for a long time. Please disconnect the charger your Bluetooth enabled device,the other one will turn off at the same time. button on the right earbud. Both earbuds will lose the connection with Frequency response 20Hz---20 KHz in time when the charging case is fully charged. each other andenter Mono pairing mode. Then search for "V6 R" from bluetooth Battery of headset 50mAH Li-polymer Battery How to Pair menu on A device and tap to pair,and search for "V6 L" Charging voltage of headset 5V Charging time of headset 1.5hours Twins Earbuds Mode from bluetooth menu onB device to pair. Battery of box 500 mAH Li-polymer Battery 1. Take both earbuds out from the charging case, they will power on and connect Charging voltage of box 5V Remark: How to Reset Mode Charging time of box 2hours with each other automatically (The LEDs on earbuds flash blue and voice prompt If the L sides can’t connect with R sides or only have one sides have sound, firstly Earphone weight 5g x 2pcs says“left channel”&”right channel” take both sides put into charge case, then take out to see if works well.If not pls Charging box weight 37g 2. Enable Bluetooth on your device and select "V6 R" from list toconnect.You will handle below operation way. Box size 100x120x40mm hear voice prompt"pairing successfully" once connected. 1. Turn off R and L both sides separately by handle. 3.Once the earbuds paired with your device manually for the for the first time as NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 2. Then long press R and L both sides around 8-10s until showing purple Led in R device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable described above, they could pair with this device automatically each time in the or L sides , then release your handle accordingly, R and L sides will repair each protection against harmful interference in a residential installation. This equipment generates uses future as soon as you take them out from charging case.Note: If you hear voice other, after around 4s will see R flash blue and red Led, L flash blue led means and can radiate radio frequency energy and, if not installed and used in accordance with the prompt "Low battery”from one of the earbud, the other one may have some instructions,may cause harmful interference to radio communications. However, there is no both sides repaired successfully. battery in fact.You may put the low battery one back to charging case for guarantee that interference will not occur in a particular installation. If this equipment does cause charging and use the other one as Mono Earbud Mode. Controls harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of Mono Earbud Mode Play/Pause music the following measures: How to Turn On/Off Mono mode for Right earbud: Volume up Press either earbud button for once Quick Double-press the button on left earbud - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. Volume Down Quick Triple-press the button on left earbud Turn on: Take the right earbud out of the charging case, it will power on and enter pairing Next Track Quick Double-press right earbud button -Connect the equipment into an outlet on a circuit different from that to which thereceiver is mode automatically.EnableBluetooth on your device and tap "V6 R" onthe list to connected. Method 1: Take both earbuds out from the charging case,they will turn on connect. If the right earbud has been used as Mono mode last Previous Track Quick Triple-press right earbud button -Consult the dealer or an experienced radio/TV technician for help and connect with each other automatically . Answer/End a Call Press either earbud button for once Changes or modifications not expressly approved by the party responsible for compliance could time, it will connect with your last connected device automatically once it was void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Method 2: When the earbuds is power off, press and hold the pick up from charging case. Reject an Press and hold either earbud buttonfor 2 secs when there is Rules. Operation is subject to the following two conditions: multi-function button on either earbud for 5 seconds. (LEDs on both incoming call a incoming call (1) this device may not cause harmful interference, and earbuds will keep blue for 1 second) Activate Siri Press and hold either earbud buttonfor 2 secs until hear (2) this device must accept any interference received, including interference that may cause voice prompt “Toot” undesired operation. 5 6 7 8


Document Created: 2019-04-28 14:37:57
Document Modified: 2019-04-28 14:37:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC