1903RSU018-U2-RF-Exposure-Report

FCC ID: 2AB9SM100

RF Exposure Info

Download: PDF
FCCID_4325496

                                    MRT Technology (Suzhou) Co., Ltd         Report No.: 1903RSU018-U2
                                    Phone: +86-512-66308358                  Report Version:        V01
                                    Web: www.mrt-cert.com                    Issue Date:     03-29-2019




           RF Exposure Evaluation Declaration


FCC ID:                        2AB9SM100

APPLICANT:                     Shenzhen Jonter Digital Co., Ltd



Application Type:              Certification

Product:                       Bluetooth Speaker

Model No.:                     M100

Serial Model No.:              GDI-EXRMX101

Trademark:                     ECOXGEAR

FCC Classification: FCC Part 15 Spread Spectrum Transmitter(DSS)




Reviewed By:

                                 ( Jame Yuan )
Approved By:

                                  ( Robin Wu )




The test results relate only to the samples tested.
The test results shown in the test report are traceable to the national/international standards through the
calibration of the equipment and evaluated measurement uncertainty herein.
The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou)
Co., Ltd.
FCC ID: 2AB9SM100                                                                          Page Number: 1 of 7


                                                     Report No.: 1903RSU018-U2


                              Revision History

   Report No.       Version     Description      Issue Date             Note

 1903RSU018-U2      Rev. 01     Initial Report   03-29-2019             Valid




FCC ID: 2AB9SM100                                             Page Number: 2 of 7


                                                                         Report No.: 1903RSU018-U2



1.    PRODUCT INFORMATION
1.1. Equipment Description
Product Name               Bluetooth Speaker
Model No.                  M100
Serial Model No.           GDI-EXRMX101
Brand Name                 ECOXGEAR
Bluetooth Specification    v4.2 (Single mode for EDR)
Frequency Range            2402~2480MHz
Type of Modulation         GFSK, Pi/4 DQPSK, 8DPSK
Antenna Type               PCB Antenna
Antenna Gain               0dBi
Note: The different models are only for marketing different clients, others are the same.




FCC ID: 2AB9SM100                                                               Page Number: 3 of 7


                                                                             Report No.: 1903RSU018-U2



 2.     RF Exposure Evaluation
 2.1. Limits
According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the
environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b)


LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)
                       Electric Field      Magnetic Field
Frequency Range                                                 Power Density         Average Time
                          Strength             Strength
      (MHz)                                                       (mW/cm2)               (Minutes)
                           (V/m)                (A/m)
                           (A) Limits for Occupational/ Control Exposures
300-1500                     --                   --                 f/300                  6
1500-100,000                 --                   --                   5                    6
                     (B) Limits for General Population/ Uncontrolled Exposures
300-1500                     --                   --                f/1500                  6
1500-100,000                 --                   --                   1                    30
f= Frequency in MHz


Calculation Formula: Pd = (Pout*G)/(4*pi*r2)


Where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
r = distance between observation point and center of the radiator in cm


Pd is the limit of MPE, 1mW/cm². If we know the maximum gain of the antenna and the total power
input to the antenna, through the calculation, we will know the distance r where the MPE limit is
reached.




FCC ID: 2AB9SM100                                                                  Page Number: 4 of 7


                                                                      Report No.: 1903RSU018-U2



2.2. Test Result of RF Exposure Evaluation
Product              Bluetooth Speaker
Test Item            RF Exposure Evaluation


Antenna Gain = 0dBi


   Frequency Band       Maximum Peak Power         Power Density at               Limit
          (MHz)                 (dBm)                   R = 20 cm              (mW/cm2)
                                                        (mW/cm2)
     2402 ~ 2480                 3.19                    0.0004                    1
CONCLUSION:
The max Power Density at R (20 cm) = 0.0004mW/cm2 < 1mW/cm2.
Therefore, the Min Safety Distance is 20cm.




                                              The End

FCC ID: 2AB9SM100                                                           Page Number: 5 of 7


                                     Report No.: 1903RSU018-U2



Appendix A - Test Setup Photograph
Refer to “1903RSU018-UT” file.




FCC ID: 2AB9SM100                          Page Number: 6 of 7


                                 Report No.: 1903RSU018-U2



Appendix B - EUT Photograph
Refer to “1903RSU018-UE” file.




FCC ID: 2AB9SM100                      Page Number: 7 of 7



Document Created: 2019-06-20 10:00:31
Document Modified: 2019-06-20 10:00:31

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC