Limited Modular Approval

FCC ID: 2AB8ZND4

Cover Letter(s)

Download: PDF
FCCID_2663608

                           Company: Intel Corporation
                               FCC ID:2AB8ZND4
                 Request for transmitter limited modular approval

                        Transmitter Module Characteristics

Item                   Requirements                                       EUT
  1    Have its own RF shielding                             Device is not equipped with
                                                             Metal shielding to cover RF
                                                             section.
 2     Have buffered modulation/data inputs (if such           All inputs to the modules
       inputs are provided),                                   are buffered through logic
                                                               or microprocessor inputs.
 3     Have it own power supply regulation                        Internal 1.8V power
                                                               regulator. Refer to Block
                                                                        diagram
 4     Meet the antenna requirements of Section               Device is equipped with on
       15.203                                                      PCB trace antenna
 5     Be tested in a stand-alone configuration, i.e., the    Device was tested as stand
       antenna, AC or DC power and data input/output          alone and also it was tested
       lines must be connected to the module but, the                 with bracelet
       module must not be inside another case during
       testing
 6     Be labeled with its own FCC ID number, and if          FCC ID will be placed on
       the FCC ID is not visible when the module is            the module back cover,
       installed inside another device, then the outside      refer to artwork drawing
       of the device into which the module is installed
       must also display a label referring to the
       enclosed module.
 7     The modular transmitter is manufactured so that        The module is installed in a
       the user cannot influence the operation of the         bracelet in normal use and
       transmitter that will operate outside of the scope      the user has no access to
       of the regulations.                                       module functionality
 8     Address compliance with the Commission's RF           The module contains only
       exposure limits in Sections 1.1310 and 2.1093.        Bluetooth BLE with output
       In addition, spread spectrum transmitters             power less than 4dBm
       operating under Section 15.247 are required to        which falls under the FCC
       address RF exposure compliance in accordance          threshold and is except from
       with Section 15.247(b)(4).                            RF exposure.



Document Created: 0220-10-01 00:00:00
Document Modified: 0220-10-01 00:00:00

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC