16U22697-S1V2 FCC Report RF EXPOSURE 0205-2.pdf

FCC ID: 2AB8ZND16

RF Exposure Info

Download: PDF
FCCID_2898625

FCC Part 1 Subpart I FCC Part 2 Subpart J RF EXPOSURE REPORT FOR BLE Module MODEL NUMBER: Radon FCC ID: 2AB8ZND16 REPORT NUMBER: 16U22697-S1V2 ISSUE DATE: FEBRUARY 2, 2016 Prepared for INTEL CORPORATION 2200 MISSION COLLEGE BOULEVARD, SANTA CLARA, CA 95052, U.S.A Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000

REPORT NO: 16U22697-S1V2 DATE: FEBRUARY 2, 2016 FCC ID: 2AB8ZND16 Revision History Issue Rev. Date Revisions Revised By -- 2/2/2016 Original issue -- 2/2/2016 Corrected output power Dave Weaver Page 2 of 6 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 16U22697-S1V2 DATE: FEBRUARY 2, 2016 FCC ID: 2AB8ZND16 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. Device under test .............................................................................................................. 5 6. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS .......................................... 6 6.1. FCC ............................................................................................................................. 6 Page 3 of 6 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 16U22697-S1V2 DATE: FEBRUARY 2, 2016 FCC ID: 2AB8ZND16 1. ATTESTATION OF TEST RESULTS COMPANY NAME: INTEL CORPORATION 2200 MISSION COLLEGE BOULEVARD SANTA CLARA, CA 95052, U.S.A. EUT DESCRIPTION: BLE DEVICE MODEL: Radon APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc., based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Dave Weaver Program Manager UL Verification Services Inc. Page 4 of 6 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 16U22697-S1V2 DATE: FEBRUARY 2, 2016 FCC ID: 2AB8ZND16 2. TEST METHODOLOGY All calculations were made in accordance with FCC KDB 447498. 3. REFERENCES Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports or client declarations. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, Fremont, California, USA UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. 5. Device under test The EUT is a BLE module. As the user to antenna separation distance is unspecified the distance was assumed to be 0mm. Page 5 of 6 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .

REPORT NO: 16U22697-S1V2 DATE: FEBRUARY 2, 2016 FCC ID: 2AB8ZND16 6. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS 6.1. FCC SAR test exclusion in accordance with KDB 447498. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0, for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison This test exclusion is applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. SAR Exclusion Calculation Table for Portable Devices (separation distance < 50mm) Frequency Avg Output power Separation Calculated Tx (MHz) dBm mW distances (mm) Threshold BLE 2480 4.00 3 0 0.9 Conclusion: The computed values are < 3; therefore, the device qualifies for Standalone SAR test exclusion. END OF REPORT Page 6 of 6 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. .


Document Created: 2017-11-17 14:07:33
Document Modified: 2017-11-17 14:07:33
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC