user guide

FCC ID: 2AB8ZND11

Users Manual

Download: PDF
FCCID_2785082

PART  I:  REGULATORY  INFORMATION   FCC  Statement  (USA)   This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,   pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection   against  harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses,  and   can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the   instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no   guarantee  that  interference  will  not  occur  in  a  particular  installation.   If  this  equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which  can  be   determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the   interference  by  one  or  more  of  the  following  measures:          Reorient  or  relocate  the  receiving  antenna.            Increase  the  separation  between  the  equipment  and  receiver.            Connect  the  equipment  to  an  outlet  on  a  circuit  different  from  that  to  which  the   receiver  is  connected.            Consult  the  dealer  or  an  experienced  radio  or  television  technician  for  help.     This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  following  two   conditions:  (1)  This  device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept   any  interference  received,  including  interference  that  may  cause  undesired  operation.       WARNING!  Exposure  to  Radio  Frequency  Radiation  The  radiated  output  power  of  this  device  is   below  the  FCC  and  Industry  Canada  radio  frequency  exposure  limits.     This  device  must  not  be  co-­‐located  or  operating  in  conjunction  with  any  other  antenna  or   transmitter.   FCC  requires  the  user  to  be  notified  that  any  changes  or  modifications  made  to  this  device  that   are  not  expressly  approved  by  manufacture,  may  void  the  user’s  authority  to  use  the  device   Regulatory  marks  and  certification  informations  are  provided  on  the  device  under  setting  :     Setting=>  about  =>  Regulatory  information   Canada  IC:     This  digital  apparatus  does  not  exceed  the  Class  B  limits  for  radio  noise  emissions  from  digital   apparatus  set  out  in  the  interference  causing  equipment  standard  entitled:  “Digital  Apparatus,”  ICES-­‐ 003  of  the  Canadian  Department  of  Communications.   Cet  appareil  numérique  respecte  les  limites  bruits  radioélectriques  applicables  aux  appareils   numériques  de  Classe  Bprescrites  dans  la  norme  sur  le  matériel  brouilleur:  "Appareils  Numériques",  

NMB-­‐003  édictee  par  le  Ministre  Canadian  des  Communications.   This  device  complies  with  Industry  Canada  licence-­‐exempt  RSS  standard(s).  Operation  is  subject  to   the  following  two  conditions:  (1)  this  device  may  not  cause  interference,  and  (2)  this  device  must   accept  any  interference,  including  interference  that  may  cause  undesired  operation  of  the  device.   Le  présent  appareil  est  conforme  aux  CNR  d’Industrie  Canada  applicables  aux  appareils  radio   exempts  de  licence.  L’exploitation  est  autorisée  aux  deux  conditions  suivantes  :  (1)  l’appareil  ne  doit   pas  produire  de  brouillage,  et  (2)  l’utilisateur  de  l’appareil  doit  accepter  tout  brouillage   radioélectrique  subi,  même  si  le  brouillage  est  susceptible  d’en  compromettre  le  fonctionnement.   Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B) Europe  (CE  Declaration  of  Conformity)   This  product  complies  with  the  Low  Voltage  Directive  2006/95/EC;  EMC  Directive   2004/108/EC,  EU  Directive  R&TTE  Directive  1999/5/EC,  and  RoHS  Directive  2011/65/EU.   Point  of  contact:  TAG  HEUER  -­‐  Branch  of  LVMH  Swiss  Manufactures  SA  -­‐  6A  RUE  LOUIS-­‐JOSEPH   CHEVROLET  -­‐  2300  LA  CHAUX-­‐DE-­‐FONDS  -­‐  SWITZERLAND     TAG  Heuer  declares  that  this  product  is  in  compliance  with  the  REACH  directives.   To  view  the  full  declaration  of  conformity,  go  to  www.tagheuer.com/connected   "In  the  EU,  this  symbol  means  that  this  product  must  not  be  disposed  of  with   household  waste.  It  is  your  responsibility  to  bring  it  to  a  designated  collection  point  for  the   recycling  of  waste  electrical  and  electronic  equipment.  For  more  information,  please  contact   your  local  waste  collection  center  or  your  point  of  purchase  of  this  product."  

      PART  IV:  QUICK  START  GUIDE   Congratulations  on  your  TAG  Heuer  connected  watch  purchase.  You  have  made  an  excellent  choice   selecting  the  ultimate  in  innovation,  quality  &  endurance-­‐  high-­‐performance  sports  criteria  that  have   been  hallmarks  of  TAG  Heuer’s  commitment  to  its  craft  since  1860.   Each  TAG  Heuer  connected  watch  is  built  to  meet  the  most  exacting  requirements.  We  paid  the  very   same  careful  attention  to  detail  on  this  connected  watch  from  design,  conception  to  finishing  that  we   constantly  do  on  our  watches  for  more  than  140  years  while  partnering  with  the  best  partners   Google  and  Intel.   The  material  used  in  our    devices  make  them  exceptionally  resilient,  even  when  used  under  the  most   rigorous  conditions.  Before  a  new  TAG  Heuer  product  is  launched,  it  is  put  through  numbers  of   reliability  and  quality  tests.   With  its  modern,  unique  and  timeless  design,  your  new    TAG  Heuer  connected  combines  Swiss   quality  watchmaking  tradition  with  technology.  We  hope  it  will  bring  you  complete  satisfaction.   This  document  is  a  quick  start  guide  providing  information  on  your  TAG  Heuer  device  basic  functions   only.  For  more  information,  please  refer  to  complete  user  guide  available  on   www.tagheuer.com/connected.

COMPATIBILITY To make your TAG Heuer connected watch, you will need to have a phone with running  Android  4.3+   or  iOS  8.2+  ans  supports  Bluetooth.  Supported  features  may  vary  between  platforms.  Visit   g.co/wearcheck  on  your  phone  to  see  if  it’s  compatible.  You  will  also  need  to  keep  your  phone  next   to  the  watch.   TURNING  ON  YOUR  WATCH   Make  sure  battery  on  watch  is  charged  or  is  charging.  To  see  how  to  charge  your  watch,  please  see   the  CHARGING  section  of  this  document.   1. To  turn  on  your  watch,  press  and  hold  the  Power  Key  (on  the  right  hand  side  of  the  watch)   for  a  few  seconds.     2. Swipe  the  welcome  screen  left  to  begin.     3. Tap  a  language   4. Connect  your  watch  to  a  power  source  and  swipe  left  to  continue.       TURNING  OFF  THE  WATCH   1. Press  and  hold  the  power  key  until  the  apps  list  appears.   2. Tap  Settings  >  Power  off.   3. When  prompted  with  message  Power  off:  Are  you  sure?  Tap  check  mark.   PAIRING YOUR WATCH Make  sure  battery  on  watch  and  phone  is  charged  or  is  charging.     1. Connect   your   phone   to   wifi   and   turn   on   Bluetooth.   You   need   a   data   connection   to   set   up   your  watch  for  the  first  time.   2. From  your  phone,  please  go  to  Google  play  store  and  download  the  “Android  Wear”  app.                 3. Open   the   “Android   wear”   app   and   click   “pair”   if   the   pairing   code   displayed   on   the   watch   matches  with  the  code  shown  on  the  phone  application.  

4. Confirmation  message  on  your  watch  will  be  displayed  once  it  is  paired.  This  can  take  a  few   minutes,  please  be  patient.   5. Follow   the   onscreen   instructions   to   complete   the   initial   setup   and   enjoy   the   discovery   of   your  TAG  Heuer  Connected  watch.   CHARGING YOUR WATCH Before using your watch for the first time, you should charge the battery. Use the charging cradle and micro USB cable provided with the watch to charge its battery. 1.Please insert the micro USB cable into the charging cradle and make sure Micro USB cable is plugged in to an authorized power source. You can use the wall plug provided within the accessories. 2. Once your cradle, micro USB cable are ready, please align the shield logo of your power button with the shield you can find on the left side of the charging cradle. You should have the charging terminals of your watch aligned with those of your charging cradle. Once those are aligned, the charger should be set properly for your watch to start charging.           For  a  more  exclusive  content  please  go  to    HYPERLINK  "http://www.tagheuer.com/connected"   www.tagheuer.com/connected.   Tips  for  using  Bluetooth  and  Wi-­‐Fi  on  your  watch   When  connecting  your  product  to  other  mobile  devices,  the  devices  must  be  positioned  close  to  each   other.  If  not,  it  may  cause  abnormal  operation  or  noise,  depending  on  the  use  environment.   In  an  open  space,  the  Bluetooth  communication  range  about  10m.  This  range  may  vary  depending  on   the  use  environment.   Do  not  place  obstacles  between  your  product  and  connected  devices.  Outgoing  /  incoming  signal  can   weaken  due  to  user’s  body,  walls,  corners  or  obstacles.  Use  where  there  is  no  obstacle.   When  using  a  wi-­‐fi  connection,  your  watch  will  search  and  connect  to  the  nearest  Wi-­‐Fi  network   based  on  the  Wi-­‐Fi  list  registered  on  your  watch.  

             


Document Created: 1110-10-22 00:00:00
Document Modified: 1110-10-22 00:00:00
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC