15U21916-S1V1 SAR_App F Dipole Cal. Certificates

FCC ID: 2AB8ZND11

RF Exposure Info

Download: PDF
FCCID_2785071

& & \\\\\‘["//,/ Cahbf:atlon Laboratory of Q\‘\\\_/// > Schmid & Partner inn<<— it_ — 5 S Schweizerischer Kalibrierdienst C Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D2450V2—706_May15 CALIBRATION CERTIFICATE Object D2450V2 — SN: 706 Calibration procedure(s) QA CAL—O5.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: May 11, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37292783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 20 dB Attenuator SN: 5058 (20k) 01—Apr—15 (No. 217—02131) Mar—16 Type—N mismatch combination SN: 5047.2 / 06327 01—Apr—15 (No. 217—02134) Mar—16 Reference Probe ES3DV3 SN: 3205 30—Dec—14 (No. ES3—3205_Dec14) Dec—15 DAE4 SN: 601 18—Aug—14 (No. DAE4—601_Aug14) Aug—15 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—O6 100005 04—Aug—99 (in house check Oct—13) In house check: Oct—16 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—14) In house check: Oct—15 Name Function Signature Calibrated by: Michael Weber Laboratory Technician MliLc~— Approved by: Katja Pokovic Technical Manager MRRE Issued: May 11, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2450V2—706_May15 Page 1 of 8

Calibration Laboratory of SS¥ sey l S Schweizerischer Kalibrierdienst ‘ & ~ Schmid & Partner ifi//mf c Service suisse d‘étalonnage Engineering AG z /R C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 4'/,, l//\\\\\\3 S Swiss Calibration Service Alulubs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid Convr sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. «_ Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. » SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—706_May15 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz +1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 37.9 46 % 1.84 mho/m +6 % Head TSL temperature change during test <0.5 °C a——— ———— SAR result with Head TSL SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 250 mW input power 13.4 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 52.6 W/ikg + 17.0 % (k=2) SAR averaged over 10 cm? (10 g) of Head TSL condition SAR measured 250 mW input power 6.21 Wikg SAR for nominal Head TSL parameters normalized to 1W 24.6 Wikg + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 50.7 +6 % 2.03 mho/m +6 % Body TSL temperature change during test <0.5 °C ———— SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 13.2 W/kg SAR for nominal Body TSL parameters normalized to 1W 51.3 Wi/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.09 W/kg SAR for nominal Body TSL parameters normalized to 1W 24.0 Wikg + 16.5 % (k=2) Certificate No: D2450V2—706_May15 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 52.3 Q + 4.7 jQ Return Loss — 25.8 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 48.9 Q + 6.2 jQ Return Loss — 23.9 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.143 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on May 28, 2002 Certificate No: D2450V2—706_May15 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 11.05.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 706 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: £= 2450 MHz; 0 = 1.84 S/m; s = 37.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: Probe: ES3DV3 — SN3205; ConvF(4.54, 4.54, 4.54); Calibrated: 30.12.2014; Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 $n601; Calibrated: 18.08.2014 Phantom: Flat Phantom 5.0 (front); Type: QDOOOP5O0AA; Serial: 1001 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 101.5 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 27.8 W/kg SAR(1 g) = 13.4 W/kg; SAR(10 g) = 6.21 W/kg Maximum value of SAR (measured) = 17.7 W/kg —5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 17.7 W/kg = 12.48 dBW/kg Certificate No: D2450V2—706_May15 Page 5 of 8

Impedance Measurement Plot for Head TSL 11 May 2815 12125101 CHIl s11 1 UOFS 1: 52.301 m 4.7051 n 385.65 pH 2 450.9000 080 MHz —‘—r—‘—-__ Del CaA Avg 16 H1d CH2 Oe 1 CA Aw 158 H1d START 2 2590.900 ago MHz STOP 2 6£590,.000 000 MHz Certificate No: D2450V2—706_May15 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 11.05.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 706 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: £ = 2450 MHz; 0 = 2.03 S/m; s = 50.7; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: Probe: ES3DV3 — SN3205; ConvF(4.32, 4.32, 4.32); Calibrated: 30.12.2014; 4 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAFE4 S$n601; Calibrated: 18.08.2014 Phantom: Flat Phantom 5.0 (back); Type: QDOOOP5OAA; Serial: 1002 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=>mm, dz=5mm Reference Value = 94.58 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 27.5 W/kg SAR(I g) = 13.2 W/kg; SAR(10 g) = 6.09 W/kg Maximum value of SAR (measured) = 17.1 W/kg dB —4.80 —9.60 —14.40 —19.20 —24.00 0 dB = 17.1 W/kg = 12.33 dBW/kg Certificate No: D2450V2—706_May15 Page 7 of 8

Impedance Measurement Plot for Body TSL 11 May 2015 12124137 CHI] S11 1 U FS 1: 49.859 a 6.2070 a 403.22 pH 2 450.000 000 MHz Del C& Av 169 H1d CH2 Del CA & AV 16" H1d START 2 250.000 080 MHz STOP 2 659.000 990 MHz Certificate No: D2450V2—706_May15 Page 8 of 8


Document Created: 2015-06-10 16:08:39
Document Modified: 2015-06-10 16:08:39
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC