RF Exposure

FCC ID: 2AB879531

RF Exposure Info

Download: PDF

FCCID_4084400

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG180925011-00B

FCC §15.247 (i) , §1.1310 , §2.1091- MAXIMUM PERMISSIBLE EXPOSURE
(MPE)
Applicable Standard
According to subpart 15.247(i)and subpart §1.1310, systems operating under the provisions of this section
shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in
excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

(B) Limits for General Population/Uncontrolled Exposure
Frequency Range Electric Field Magnetic Field Power Density Averaging Time
(MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes)
0.3–1.34 614 1.63 *(100) 30
1.34–30 824/f 2.19/f *(180/f²) 30
30–300 27.5 0.073 0.2 30
300–1500 / / f/1500 30
1500–100,000 / / 1.0 30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.

Calculation Formula:

Prediction of power density at the distance of the applicable MPE limit:
S = PG/4R² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);

Calculated Data:

Maximum Power
Frequency Antenna Gain Including Evaluation Power
MPE Limit
Range Tolerance Distance Density
(mW/cm2)
(MHz) (cm) (mW/cm2)
(dBi) (numeric) (dBm) (mW)
2412-2462 5 3.16 27 501.19 20.00 0.32 1.0

Note:
The Maximum Power Including Tolerance was declared by manufacturer.

Result: Compliance, The device meets FCC MPE at 20 cm distance

Page 12 of 65

Document Created: 2019-03-27 06:06:11
Document Modified: 2019-03-27 06:06:11

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC